I have two tables like the following:
TABLE1:
=======
somid, tobeupdated
1 , null
2 , null
3 , null
10 , null
TABLE2:
=======
rangeofids
2
3
9
10
11
12
13
I have to update TABLE1.tobeupdated (or found its' should be value) based on the following criteria(s):
if TABLE1.somid NOT exists in TABLE2.rangeofids, then the expected result is: tobeupdated = TABLE1.somid
else find the next available (or unused) TABLE2.rangeofids which is larger then TABLE1.somid
So the expected values are:bu
TABLE1:
=======
somid, tobeupdated
1 , 1
2 , 4
3 , 4
10 , 14
I tried hard, but the simplest solution I came up with is creating a temporary table with a full sequence of ids (from 1 to max(rangeofids)+1) MINUS TABLE2.rangeofids so I can found the MIN(TMPTABLE.id) where TMPTABLE.ID > TABLE1.somid.
But isn't there a better solution (without the temp table)?
Note: I can't create procedures/functions, etc, so it must be standard (Oracle 10) SQL.
This is my try.
First we should decide using only table2 what value should return after finding the value there.
select rangeofids,
candidate,
nvl(candidate,lead(candidate ignore nulls) over (order by rangeofids)) as full_candidate
from (
select rangeofids, case when dist=1 then null else rangeofids+1 end as candidate
from (
select rangeofids,
lead(rangeofids) over (order by rangeofids) - rangeofids as dist
from table2
)
);
After this a merge into table1 with the below select will solve the problem:
select someid, nvl(full_candidate, someid)
from table1 a
left join (
--the above query
) b
on a.someid = b.rangeofids;
See SQLFIDDLE.
Related
How to repeat rows based on column value in snowflake using sql.
I tried a few methods but not working such as dual and connect by.
I have two columns: Id and Quantity.
For each ID, there are different values of Quantity.
So if you have a count, you can use a generator:
with ten_rows as (
select row_number() over (order by null) as rn
from table(generator(ROWCOUNT=>10))
), data(id, count) as (
select * from values
(1,2),
(2,4)
)
SELECT
d.*
,r.rn
from data as d
join ten_rows as r
on d.count >= r.rn
order by 1,3;
ID
COUNT
RN
1
2
1
1
2
2
2
4
1
2
4
2
2
4
3
2
4
4
Ok let's start by generating some data. We will create 10 rows, with a QTY. The QTY will be randomly chosen as 1 or 2.
Next we want to duplicate the rows with a QTY of 2 and leave the QTY =1 as they are.
Obviously you can change all parameters above to suit your needs - this solution works super fast and in my opinion way better than table generation.
Simply stack SPLIT_TO_TABLE(), REPEAT() with a LATERAL() join and voila.
WITH TEN_ROWS AS (SELECT ROW_NUMBER()OVER(ORDER BY NULL)SOME_ID,UNIFORM(1,2,RANDOM())QTY FROM TABLE(GENERATOR(ROWCOUNT=>10)))
SELECT
TEN_ROWS.*
FROM
TEN_ROWS,LATERAL SPLIT_TO_TABLE(REPEAT('hire me $10/hour',QTY-1),'hire me $10/hour')ALTERNATIVE_APPROACH;
I have the task to find out if all columns in a SQL Server table have exact the same value. The table content is created by a stored procedure and can vary in the number of columns. The first column is an ID, the second and the following columns must be compared if the all columns have exact the same value.
At the moment I do not have a clue how to achieve this.
The best solution would be to display only the rows, which have different values in one or multiple columns except the first column with ID.
Thank you so much for your help!!
--> Edit: The table looks this:
ID Instance1 Instance2 Instance3 Instance4 Instance5
=====================================================
A 1 1 1 1 1
B 1 1 0 1 1
C 55 55 55 55 55
D Driver Driver Driver Co-driver Driver
E 90 0 90 0 50
F On On On On On
The result should look like this, only the rows with one or multiple different column values should be display.
ID Instance1 Instance2 Instance3 Instance4 Instance5
=====================================================
B 1 1 0 1 1
D Driver Driver Driver Co-driver Driver
E 90 0 90 0 50
My table has more than 1000 rows and 40 columns
you can achieve this by using row_number()
Try the following code
With c as(
Select id
,field_1
,field_2
,field_3
,field_n
,row_number() over(partition by field_1,field_2,field_3,field_n order by id asc) as rn
From Table
)
Select *
From c
Where rn = 1
row_number with partition is going to show you if the field is repeated by assigning a number to a row based on field_1,field_2,field_3,field_n, for example if you have 2 rows with same field values the inner query is going to show you
rn field_1 field_2 field_3 field_n id
1 x y z a 5
2 x y z a 9
After that on the outer part of the query pick rn = 1 and you are going to obtain a query without repetitions based on fields.
Also if you want to delete repeated numbers from your table you can apply
With c as(
Select id
,field_1
,field_2
,field_3
,field_n
,row_number() over(partition by field_1,field_2,field_3,field_n order by id asc) as rn
From Table
)
delete
From c
Where rn > 1
The best solution would be to display only the rows, which have different values in one or multiple columns except the first column with ID.
You may be looking for a the following simple query, whose WHERE clause filters out rows where all fields have the same value (I assumed 5 fields - id not included).
SELECT *
FROM mytable t
WHERE NOT (
field1 = field2
AND field1 = field3
AND field1 = field4
AND field1 = field5
);
I have two tables UCP , TerritoriesInfo
UCP have TerritoriesID , Territories
TerritoriesInfo have ID , TerritoriesName
I want to update TerritoriesID with Row_Number()
for example
UCP
TerritoriesID Territories
1 NULL
2 NULL
3 NULL
4 NULL
5 NULL
6 NULL
7 NULL
TerritoriesInfo
ID TerritoriesName
1 A
2 B
3 C
4 D
5 ES
6 T
7 R
First i want to assign UCP.TerritoriesID = ROW_NUMBERS() second i want to Update UCP.Territories from TerritoriesInfo.TerritoriesName where UCP.TerritoriesID = TerritoriesInfo.ID
I tried Auto increment but it doesn't work when i use delete statement and try again
then i tried this query but doesn't work
update UCP SET TerritoriesID = ROW_NUMBER()
Because UCP.TerritoriesID and TerritoriesInfo.ID contain one-based sequences without gaps in the sample data, it's unclear what the requirement is here. My best guess is that the real UCP.TerritoriesID data is either non-sequential or doesn't start at one.
ROW_NUMBER requires an ORDER BY in its OVER clause. I'm guessing that the row numbers should be assigned based on the current value of UCP.TerritoriesID, pending more information:
;WITH numCTE
AS
( SELECT TerritoriesID, ROW_NUMBER() OVER (ORDER BY TerritoriesID) AS rn
FROM UCP
)
UPDATE numCTE
SET TerritoriesID = rn
(I'm assuming that once you have this, you can handle the update of UCP.Territories)
Correction to my question....
I'm trying to select and sort in a query from a single table. The primary key for the table is a combination of a serialized number and a time/date stamp.
The table's name in the database is "A12", the columns are defined as:
Serial2D (PK, char(25), not null)
Completed (PK, datetime, not null)
Result (smallint, null)
MachineID (FK, smallint, null)
PT_1 (float, null)
PT_2 (float, null)
PT_3 (float, null)
PT_4 (float, null)
Since the primary key for the table is a combination of the "Serial2D" and "Completed", there can be multiple "Serial2D" entries with different values in the "Completed" and "Result" columns. (I did not make this database... I have to work with what I got)
I want to write a query that will utilize the value of the "Result" column ( always a "0" or "1") and retrive only unique rows for each "Serial2D" value. If the "Result" column has a "1" for that row, I want to choose it over any entries with that Serial that has a "0" in the Result column. There should be only one entry in the table that has a Result column entry of "1" for any Serial2D value.
Ex. table
Serial2d Completed Result PT_1 PT_2 PT_3 PT_4
------- ------- ------ ---- ---- ---- ----
A1 1:00AM 0 32.5 20 26 29
A1 1:02AM 0 32.5 10 29 40
A1 1:03AM 1 10 5 4 3
B1 1:04AM 0 29 4 1 9
B1 1:05AM 0 40 3 4 9
C1 1:06AM 1 9 7 6 4
I would like to be able to retrieve would be:
Serial2d Completed Result PT_1 PT_2 PT_3 PT_4
------- ------- ------ ---- ---- ---- ----
A1 1:03AM 1 10 5 4 3
B1 1:05AM 0 40 3 4 9
C1 1:06AM 1 9 7 6 4
I'm new to SQL and I'm still learning ALL the syntax. I'm finding it difficult to search for the correct operators to use since I'm not sure what I need, so please forgive my ignorance. A post with my answer could be staring me right in the face and i wouldn't know it, please just point me to it.
I appreciate the answers to my previous post, but the answers weren't sufficient for me due to MY lack of information and ineptness with SQL. I know this is probably insanely easy for some, but try to remember when you first started SQL... that's where I'm at.
Since you are using SQL Server, you can use Windowing Functions to get this data.
Using a sub-query:
select *
from
(
select *,
row_number() over(partition by serial2d
order by result desc, completed desc) rn
from a12
) x
where rn = 1
See SQL Fiddle with Demo
Or you can use CTE for this query:
;with cte as
(
select *,
row_number() over(partition by serial2d
order by result desc, completed desc) rn
from a12
)
select *
from cte c
where rn = 1;
See SQL Fiddle With Demo
You can group by Serial to get the MAX of each Time.
SELECT Serial, MAX([Time]) AS [Time]
FROM myTable
GROUP BY Serial
HAVING MAX(Result) => 0
SELECT
t.Serial,
max_Result,
MAX([time]) AS max_time
FROM
myTable t inner join
(SELECT
Serial,
MAX([Result]) AS max_Result
FROM
myTable
GROUP BY
Serial) m on
t.serial = m.serial and
t.result = m.max_result
group by
t.serial,
max_Result
This can be solved using a correlated sub-query:
SELECT
T.serial,
T.[time],
0 AS result
FROM tablename T
WHERE
T.result = 1
OR
NOT EXISTS(
SELECT 1
FROM tablename
WHERE
serial = T.serial
AND (
[time] > T.[time]
OR
result = 1
)
)
I have result of two queries like:
Result of query 1
ID Value
1 4
2 0
3 6
4 9
Result of query 2
ID Value
1 6
2 4
3 0
4 1
I want to add values column "Value" and show final result:
Result of Both queries
ID Value
1 10
2 4
3 6
4 10
plz guide me...
select id, sum(value) as value
from (
select id, value from query1
uninon all
select id, value from query2
) x
group by id
Try using a JOIN:
SELECT
T1.ID,
T1.Value + T2.Value AS Value
FROM (...query1...) AS T1
JOIN (...query2...) AS T2
ON T1.Id = T2.Id
You may also need to consider what should happen if there is an Id present in one result but not in the other. The current query will omit it from the results. You may want to investigate OUTER JOIN as an alternative.
A not particularly nice but fairly easy to comprehend way would be:
SELECT ID,SUM(Value) FROM
(
(SELECT IDColumn AS ID,ValueColumn AS Value FROM TableA) t1
OUTER JOIN
(SELECT IDColumn AS ID,ValueColumn AS Value FROM TableB) t2
) a GROUP BY a.ID
It has the benefits of
a) I don't know your actual table structure so you should be able to work out how to get the two 'SELECT's working from your original queries
b) If ID doesn't appear in either table, that's fine