I have a huge list of transport requests, I want to get a report of all included objects of these (as a "sum-up"). I couldn't find a report in transaction SE03, SE09, SE10, nor in Transport Organizer Tools.
Help is appreciated.
I found out, use SE11, goto table E071, filter by TRKORR (multiple selection is possible), group result in Grid Display by PGMID, OBJECT and OBJ_NAME.
I don't know if there's a standard report for that but these are the tables in SAP where you can get that information to make a Z report:
E070: Change & Transport System: Header of Requests/Tasks
E07T: Change & Transport System: Short Texts for Requests/Tasks
E071: Change & Transport System: Object Entries of Requests/Tasks <--- Here are the objects to be transported.
E070A: Change & Transport System: Attributes of a Request
E070C: CTS: Source/Target Client of Requests/Tasks
In the case of table 'E070' there's a relationship with itself between fields 'TRKORR' (Request/Task) and 'STRKORR' (Higher-Level Request).
Hope it helps.
Related
I am stuck at a point where I am configuring the DCM module and the current parameter I am trying to configure DcmTimStrP2AdjustServer,
The requirement is P2CAN_SERVER_MAX = 25ms; P2STARCAN_SERVER_MAX = 5000ms;
Is DcmDspSessionP2ServerMax the same as P2CAN_SERVER_MAX? and if it is the same
What is the need for DcmTimStrP2AdjustServer and how do I find the best value for DcmTimStrP2AdjustServer.(The values all should be a multiple of DcmTaskTime which I find to be logical).
DcmTaskTime = 5ms;
I am following Autosar 4.0.3, using ETAS tool for configuring the parameters.
To fulfill your requirement, you need to configure respectively
DcmDspSessionP2ServerMax & DcmDspSessionP2StarServerMax for each session control in the DcmDspSessionRows at Dcm/DcmConfigSet/DcmDsp/DcmDspSession/.
i.e.
DcmDspSessionP2ServerMax 25
DcmDspSessionP2StarServerMax 5000
There is no DcmTimStrP2AdjustServer, but I guess you're referring to DcmTimStrP2ServerAdjust instead. DcmTimStrP2ServerAdjust & DcmTimStrP2StarServerAdjust should be configured to a multiple of your DcmTaskTime (5ms in your case, so i.e. 5ms, 10ms, 15, ms, ... is applicable) and are used to safeguard that the response is available on the bus before triggering the P2 or P2* timeouts. In your case you may want to set these values to the same values as in the DcmDspSessionRows if there is no other specification given, because the chosen timeout values there are already multiples of your DcmTaskTime:
DcmTimStrP2ServerAdjust 25
DcmTimStrP2StarServerAdjust 5000
The adjust value is an internal value, in order to adjust the delay between the Dcm Transmit Request and the message being actually on the Bus.
The definition of P2ServerMax and P2*ServerMax and their corresponding Adjust values is the same:
This parameter is used to guarantee that the diagnostic response is available on the bus before reaching P2 by adjusting the current DcmDspSessionP2ServerMax. This parameter mainly represents the software architecture dependent communication delay between the time the transmission is initiated by DCM and the time when the message is actually transmitted to the bus
Good day
I'm trying to perform load testing with LoadRunner 11. Here's an issue:
I've got automatically generated script after actions recording
Need to catch Session ID. I do it with web_reg_save_param() in the next way:
web_reg_save_param("S_ID",
"LB=Set-Cookie: JSESSIONID=",
"RB=; Path=/app/;",
LAST);
web_add_cookie("S_ID; DOMAIN={host}");
I catch ID from the response (Tree View):
D2B6F5B05A1366C395F8E86D8212F324
Compare it with Replay Log and see:
"S_ID = 75C78912AE78D26BDBDE73EBD9ADB510".
Compare 2 IDs above with the next request ID and see 3rd ID (Tree View):
80FE367101229FA34EB6429F4822E595
Why do I have 3 different IDs?
Let me know if I have to provide extra information.
You should Use(Search=All) below Code. Provided your Right and left boundary is correct:
web_reg_save_param("S_ID",
"LB=Set-Cookie: JSESSIONID=",
"RB=; Path=/app/;",
"Search=All",
LAST);
web_add_cookie("{S_ID}; DOMAIN={host}");
For Details refer HP Mannual for web_reg_save_param function.
I do not see what the conflict or controversy is here. Yes, items related to state or session will definitely change from user to user, one recording session to the next. They may even change from one request to the next. You may need to record several times to identify the change and use pattern for when you need to collect and when you need to reuse the collected data from a response in a subsequent request.
Take a listen to this podcast. It should help
http://www.perfbytes.com/dynamic-data-correlation
I am trying to find any element refer to IncomingBitrate in webrtc dump file .
Where I can find the incoming bitrate in webrtc-internals?
Also, How I can calculate incoming bitrate from webrtc stats?
In webrtc-internals check the active connection -- it's printed in bold. Usually it is Conn-Audio-1-0. There are two fields bytesSent and bytesReceived which will allow you to calculate the bitrate. Also check the constraints + stats demo for an actual example: https://webrtc.github.io/samples/src/content/peerconnection/constraints/
In getStats, iterate the reports until you find one of kind googCandidatePair with .stat('googActiveConnection') === 'true'. That is giving you the same information as webrtc-internals. If you want per-track/stream values, reports of type ssrc have bytesSent or bytesReceived, depending on whether they are sent or received.
Then calculate the bitrate by dividing the bytes sent/received by the time difference between the getStats calls.
I am running a very simple query and trying to extract the results to a text file. The entire query is essentially what is below, I am selecting everything from one single table with one piece of where criteria which is limiting the data to one month's worth. After it has extracted around 1.2 gig this error shows up. Is there any way that I can work around this other than extracting smaller date ranges? I am trying to pull a couple of years worth of data so if I can only get it a few days at a time it will take a lot of manual work.
I am currently using the free trial of a DB2 query tool - Razor SQL if that makes a difference, I can probably purchase different software if it would help. I am trying to get IBM's tool but for some reason it freezes during the download so I am still working on that. I have searched about this error but everything I see seems much more complex than what I am doing and I can't tell if it applies or not. Thanks in advance.
select *
from MyTable
where date_col between date '2014-01-01' and date '2014-01-31'
I stumbled at this error too, found out it is related to db2jcc.jar (type 4) driver.
Excerpt: If there are no items in the result set left (or to begin with), the Result set is closed automatically and therefore the Exception. Suggestion is to handle it in the application, perhaps in my case, I started checking if(rs.next()) but otherwise, there is a work around. Check out the source link below for how you can set some properties to Data source and avoid exception.
Source :
"Invalid operation: result set is closed" error with Data Server Driver for JDBC
In my case, i missed some properties in WAS, after add allowNextOnExhaustedResultSet the issue is fixed.
1.Log in to the WebSphere Application Server administration console.
2.Select Resources > JDBC > Data sources > Application Center DataSource name > Custom properties and click New.
3.In the Name field, enter allowNextOnExhaustedResultSet.
4.In the Value field, type 1.
5.Change the type to java.lang.Integer.
6.Click OK.
Sometimes you need also check whether resultSetHoldability properties exists. Details refer to here.
I encountered this failure also when ugrading from JDBC Type 2 driver (db2java.zip) JDBC type 4 driver (db2jcc4.jar)
Statement statement = results.getStatement();
if (statement != null)
{
connection = statement.getConnection(); // ** failed here
statement.close();
}
Solution was to check if the statement is closed or not as follows.
Changed to:
Statement statement = results.getStatement();
if (statement != null && !statement.isClosed()) {
{
connection = statement.getConnection();
statement.close();
}
Creating property bellow with type Integer it's worked for me:
allowNextOnExhaustedResultSet:
I had the same issue on WAS 7 so i had to add and change few this on Admin Console.
This TeamWorksRuntimeException exception should be fixed by applying APAR JR50863 which is available on top of BPM V8.5.5 or included on BPM V8.5 refresh pack 6.
For the case that the APAR does not solve the problem, try following workaround:
Log in to the WebSphere Application Server admin console
Select Resources > JDBC > Data sources > DataSource name (TeamWorksDB) > Custom properties and click New
In the Name field, enter downgradeHoldCursorsUnderXa
In the Value field, type true
Change the type to java.lang.Boolean
Click OK to save your changes
Select custom property resultSetHoldability
In the Value field, type 1
Click OK to save your changes
Source of the Answer : https://developer.ibm.com/answers/questions/194821/invalid-operation-result-set-is-closed-errorcode-4/
Restarting the app may fix the problem if connection pool lost session to Db2. If using Tomcat then connection pool property of 'testonBorrow' may reestablish the connection to Db2.
here i have got one issue.can some one please help me to resolve this.
i was trying to extract some data to DS 0FI_AP_6...
then in InfoPackage Monitor I can see like..
-->Requests (messages): Everything OK
-->Extraction (messages): Everything OK
-->Transfer (IDocs and TRFC): Missing messages or warnings
-->Info IDoc 2 : sent, not arrived ; IDoc ready for dispatch (ALE service)
Data Package 1 : 23752 Records arrived in BW
Data Package 2 : 15216 Records arrived in BW
Request IDoc : Application document posted
Info IDoc 1 : Application document posted
Info IDoc 3 : Application document posted
Info IDoc 4 : Application document posted
-->Processing (data packet): Everything OK
Data Package 1 ( 38672 Records ) : Everything OK
in Status Menu I am having message like...
Missing data packages for PSA Table
Diagnosis
Data packets are missing from PSA Table . BI processing does not
return any errors. The data transport from the source system to BI was
probably incorrect.
Procedure
Check the tRFC overview in the source system.
You access this log using the wizard or following the menu path
"Environment -> Transact. RFC -> Source System".
Error handling:
If the tRFC is incorrect, resolve the errors listed there.
Check that the source system is connected properly to BI. In
particular, check the remote user authorizations in BI.
Please suggest me how to resolve this issue...
thanks in advance for your help and quick reply is much appreciated.
But what the worst thing is I deleted the infopackage in PSA by mistake.
In the normal case, if I repeat the process again, the delta load would be OK, but now the delta load remains error.
so gurus,
1. how can I restart my delta loading correctly?
2. I want to modify the timestamp in the delta table, but how to do it ?
Go to T-Code RSA7 in the source system. This will tell you the date/timestamp that the delta is set to. If the date was changed to a range that no longer works then you will need to re-initialize the datasource in the BW system side. However, the Delta date may still be fine becauase it may have never been changed when you tried to first do your load because of the connection issues.
You can create a new infopackage and set the update to Initialize Datasource with Data Transfer. This will essentially run a full load from the datasource and then reset the delta pointer date/timestamp to when you ran it. This way you will capture all the data that you needed and anything that was already in the PSA should be overwritten.
Also note that you should delete or set the request status to red on the previous request that may contain bad data in the PSA.
From the original error it seems like you are having an RFC connection issue between the datasource and BW. Contact your BASIS support and have them check the connection to make sure it is good. To ensure that your datasource is extracting properly you can run t-code RSA3 on it in the source system. This will ensure that the extraction of data is working properly.