I have a crystal report which is having a data source from sql server .I am always getting this error when we want to show the report.I have seen the connection too.No Problem with that connection.
error :
Unknown Query Engine Error
Failed to open a rowset.
Error in File C:\Users\ADMINI~1\AppData\Local\Temp\student{ED5C2412-C7A1-4E1D-8093-1EFDA02340ABD}.rpt:
Unknown Query Engine Error
Can any one help me ?
In extension to this Question I found a problem was caused by one column of the table in the report when i remove that fields it is working fine.When the report is migrated from access to sql server source it is converted using cross join.Does this raised from table linking only ?
I'm sure if this is relevant but try the solution given in this link . The solution suggests you add this line to your config file :
<startup useLegacyV2RuntimeActivationPolicy="true"><supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/></startup>
Related
More info from stms :
Short Text
SQL error "SQL code: -10108" occurred while accessing table "CDHDR".
What happened?
Database error text: "SQL message: Session has been reconnected."
Return value of the database layer: "SQL dbsl rc: 99"
The problem is that client is running this code through the job in which I am not available to debug it. All I know is that it is working for other countries selected but for some specific it is not so the question is :
Was it a temporary connection error between two servers or is it data overload issue due to SELECT statement?
At the moment I am not really sure which thing I have to look on the system, the same program once produced the error for exceeding the limit in the db query ( > 10 minutes) so this might be related to system configuration or what?
Thanks in advance
sometimes i have this error when i try to connect to my database in B1if :
vBIU.errhdlg='' exceptionmsg='com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception:
com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception:
com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception:
com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: java.lang.RuntimeException: Connect to
Business One failed. (-119) Database server type not supported -b1Server=SRV-B1-HYPPROD,
company=SBO_HYPFR_PROD, licenseServer=HYP-B1-LIC:30000, dbType=7, dbUser=sa, userName=B1i-' msglogexcl='false'
handover2CentralSrv='' MessageLog='true' msglogdbop='insert'>
the question is how to fix that ?
The Error happens when B1i don't get a connection to the DB. That should not be a problem because B1i repeats the process after a minuten and then the connection should be there.
We fixed this by Installing the 64 Bit version of B1DIAPI.x64. Not sure why that worked.
Note you need to update the SLD links for your database and SBO-COMMON - the jcoPath will likely be different - replace the "Program Files (x86)" with just "Program Files".
I am using kibi-community-demo-full-4.6.4-linux-x64 version.
In datasource:
"connection_string": "jdbc:hive://localhost:10000/root",
"libpath": "/home/pare/Downloads/jar/",
"drivername": "org.apache.hadoop.hive.jdbc.HiveDriver",
"libs": "hive-jdbc-0.11.0.jar,hive-metastore-0.11.0.jar,libthrift-0.9.1.jar,hive-service-0.13.1.jar,hive-jdbc-1.2.1.2.3.2.0-2950-standalone.jar,hadoop-common-2.7.1.2.3.2.0-2950.jar",
After that when in queries I write a query it will show error like:
Queries Editor: Error 400 Bad Request: Error running static method java.lang.IllegalArgumentException: Bad URL format at org.apache.hive.jdbc.Utils.parseURL(Utils.java:185) at org.apache.hive.jdbc.HiveConnection.(HiveConnection.java:84)
What is the error can any one explain me how to solve it?
I am able to connect after changing the jars version.
and also I changed the driver name "org.apache.hive.jdbc.HiveDriver".
I am working on a project in visual studio 2012. Recently, I added a database project to the solution. The database already existed before I added it to the solution and everything worked fine.
Now, however, when I try to run the application I get errors. The errors are being caused by a computer-generated file called [database name].sql. At the top of the tile, it reads:
/*
Deployment script for [the database name here]
This code was generated by a tool.
Changes to this file may cause incorrect behavior and will be lost if
the code is regenerated.
*/
This file gets re-created every time the application runs. The errors that occur appear to be syntax errors. I cannot fix them because any changes I make to the file are irrelevant because a new file gets generated with each run and the errors re-appear.
I tried looking into this more online but had trouble. This is all rather new to me.
Here are some of the errors being created:
GO
:setvar DatabaseName "(the database name is here)"
which gives me three errors that read:
Error 88 SQL80001: Incorrect syntax near ':'.
Error 89 SQL80001: 'DatabaseName' is not a recognized option.
Error 90 SQL80001: Incorrect syntax near '"(the database name is here in the code)"'.
Also, there is a line of code that reads:
CREATE USER [(the domain)\(the username)] FOR LOGIN [(the domain)\(the username)];
GO
which gives the following error:
Error 119 SQL72014: .Net SqlClient Data Provider: Msg 15401, Level 16, State 1, Line 1 Windows NT user or group '(the domain)\(the username)' not found. Check the name again.
From the errors you have posted it looks like there are two issues:
Windows NT user or group '(the domain)\(the username)' not found. - The user being used to access the database doesn't exist. As it's a Windows user I'm guessing that it uses the current user's credentials.
Make sure that your instance of SQL can accept Windows logins and that you (and anyone else building the software) has the necessary access rights.
'DatabaseName' is not a recognized option. - This is more than likely also caused by the first issue, but double check that the database exists.
The error message caught me out recently as it did not relate to the cause of my problem at all. It turns out my SQL script was incorrectly written (for my case - I forgot to add IDENTITY (1,1) to my PK column) to begin with.
Moral of the story for me was to test out the SQL data file in SSMS first.
I am running a very simple query and trying to extract the results to a text file. The entire query is essentially what is below, I am selecting everything from one single table with one piece of where criteria which is limiting the data to one month's worth. After it has extracted around 1.2 gig this error shows up. Is there any way that I can work around this other than extracting smaller date ranges? I am trying to pull a couple of years worth of data so if I can only get it a few days at a time it will take a lot of manual work.
I am currently using the free trial of a DB2 query tool - Razor SQL if that makes a difference, I can probably purchase different software if it would help. I am trying to get IBM's tool but for some reason it freezes during the download so I am still working on that. I have searched about this error but everything I see seems much more complex than what I am doing and I can't tell if it applies or not. Thanks in advance.
select *
from MyTable
where date_col between date '2014-01-01' and date '2014-01-31'
I stumbled at this error too, found out it is related to db2jcc.jar (type 4) driver.
Excerpt: If there are no items in the result set left (or to begin with), the Result set is closed automatically and therefore the Exception. Suggestion is to handle it in the application, perhaps in my case, I started checking if(rs.next()) but otherwise, there is a work around. Check out the source link below for how you can set some properties to Data source and avoid exception.
Source :
"Invalid operation: result set is closed" error with Data Server Driver for JDBC
In my case, i missed some properties in WAS, after add allowNextOnExhaustedResultSet the issue is fixed.
1.Log in to the WebSphere Application Server administration console.
2.Select Resources > JDBC > Data sources > Application Center DataSource name > Custom properties and click New.
3.In the Name field, enter allowNextOnExhaustedResultSet.
4.In the Value field, type 1.
5.Change the type to java.lang.Integer.
6.Click OK.
Sometimes you need also check whether resultSetHoldability properties exists. Details refer to here.
I encountered this failure also when ugrading from JDBC Type 2 driver (db2java.zip) JDBC type 4 driver (db2jcc4.jar)
Statement statement = results.getStatement();
if (statement != null)
{
connection = statement.getConnection(); // ** failed here
statement.close();
}
Solution was to check if the statement is closed or not as follows.
Changed to:
Statement statement = results.getStatement();
if (statement != null && !statement.isClosed()) {
{
connection = statement.getConnection();
statement.close();
}
Creating property bellow with type Integer it's worked for me:
allowNextOnExhaustedResultSet:
I had the same issue on WAS 7 so i had to add and change few this on Admin Console.
This TeamWorksRuntimeException exception should be fixed by applying APAR JR50863 which is available on top of BPM V8.5.5 or included on BPM V8.5 refresh pack 6.
For the case that the APAR does not solve the problem, try following workaround:
Log in to the WebSphere Application Server admin console
Select Resources > JDBC > Data sources > DataSource name (TeamWorksDB) > Custom properties and click New
In the Name field, enter downgradeHoldCursorsUnderXa
In the Value field, type true
Change the type to java.lang.Boolean
Click OK to save your changes
Select custom property resultSetHoldability
In the Value field, type 1
Click OK to save your changes
Source of the Answer : https://developer.ibm.com/answers/questions/194821/invalid-operation-result-set-is-closed-errorcode-4/
Restarting the app may fix the problem if connection pool lost session to Db2. If using Tomcat then connection pool property of 'testonBorrow' may reestablish the connection to Db2.