Related
I just installed SQL Server Express 2012 on my home server. I'm trying to connect to it from Visual Studio 2012 from my desktop PC, and repeatedly getting the well-known error:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
What I've done to try to fix this:
Run SQL Server Configuration Manager on the server and enable SQL Server Browser
Add a Windows Firewall exception on the server for TCP, ports 1433 and 1434 on the local subnet.
Verify that I have a login on the SQL Server instance for the user I'm logged in as on the desktop.
Verify that I'm using Windows Authentication on the SQL Server instance.
Repeatedly restart SQL Server and the whole dang server.
Pull all my hair out.
How can I get SQL Server 2012 Express to allow remote connections!?
Well, glad I asked. The solution I finally discovered was here:
How do I configure SQL Server Express to allow remote tcp/ip connections on port 1433?
Run SQL Server Configuration Manager.
Go to SQL Server Network Configuration > Protocols for SQLEXPRESS.
Make sure TCP/IP is enabled.
So far, so good, and entirely expected. But then:
Right-click on TCP/IP and select Properties.
Verify that, under IP2, the IP Address is set to the computer's IP address on the local subnet.
Scroll down to IPAll.
Make sure that TCP Dynamic Ports is blank. (Mine was set to some 5-digit port number.)
Make sure that TCP Port is set to 1433. (Mine was blank.)
(Also, if you follow these steps, it's not necessary to enable SQL Server Browser, and you only need to allow port 1433, not 1434.)
These extra five steps are something I can't remember ever having had to do in a previous version of SQL Server, Express or otherwise. They appear to have been necessary because I'm using a named instance (myservername\SQLEXPRESS) on the server instead of a default instance. See here:
Configure a Server to Listen on a Specific TCP Port (SQL Server Configuration Manager)
The correct way to connect to remote SQL Server (without opening UDP port 1434 and enabling SQL Server Browser) is to use ip and port instead of named instance.
Using ip and port instead of named instance is also safer, as it reduces the attack surface area.
Perhaps 2 pictures speak 2000 words...
This method uses the specified port (this is what most people want I believe)..
This method requires opening UDP port 1434 and SQL Server Browser running..
One More Thing...
Kyralessa provides great information but I have one other thing to add where I was stumped even after this article.
Under SQL Server Network Configuration > Protocols for Server > TCP/IP Enabled. Right Click TCP/IP and choose properties. Under the IP Addresses you need to set Enabled to Yes for each connection type that you are using.
You can use this to solve this issue:
Go to START > EXECUTE, and run CLICONFG.EXE.
The Named Pipes protocol will be first in the list.Demote it, and promote TCP/IP.
Test the application thoroughly.
I hope this help.
You can also set
Listen All to NO
in the protocol dialog then in the IP address IP1 (say)
set enabled to Yes,
define yr IP address,
set TCP Dynamic to Blank and
TCP port to 1433 (or whatever)
I had this problem recently. 2015 Aug
Solved by opening SQL Server Configuration Manager
SQL Server Network Configuration -> Protocols for SQLEXPRESS
Properties on TCP/IP -> IP Adresses tab
Everything stays default, only set IPALL: TCP Port to 1433
Can connect to with SQL Server Manager to machine: [hostaddress], 1433
Example:
This article helped me...
How to enable remote connections in SQL Server
Everything in SQL Server was configured, my issue was the firewall was blocking port 1433
On my installation of SQL Server 2012 Developer Edition, installed with default settings, I just had to load the SQL Server Configuration Manager -> SQL Server Network Configuration -> Protocols for MSSQLSERVER and change TCP/IP from Disabled to Enabled.
I had to add a firewall inbound port rule to open UDP port 1434. This is the one Sql Server Browser listens on.
I prefer way of "Rosdi Kasim" as that's doesn't require detail configuration on the IP.
I will definitely forget it again when I try to up another server again.
Keep It Simple Stupid (KISS) by simply enable the Sql Server Browser service, then add the \SQLEXPRESS behind the IP when you connect the server.
Direct using IP without "\SQLEXPRESS" was my point of failure as it doesn't use the default port.
Thanks.
I had to add port via Configuration Manager and add the port number in my sql connection [host]\[db instance name],1433
Note the , (comma) between instancename and port
I had the same issue with SQL Server 2014 locally installed named instance. Connecting using the FQDN\InstanceName would fail, while connecting using only my hostname\InstanceName worked. For example: connecting using mycomputername\sql2014 worked, but using mycomputername.mydomain.org\sql2014 did not. DNS resolved correctly, TCP/IP was enabled within SQL Configuration Manager, Windows Firewall rules added (and then turned the firewall off for testing to ensure it wasn't blocking anything), but none of those fixed the problem.
Finally, I had to start the "SQL Server Browser" service on the SQL Server and that fixed the connectivity issue.
I had never realized that the SQL Server Browser service actually assisted the SQL Server in making connections; I was under the impression that it simply helped populate the dropdowns when you clicked "browse for more" servers to connect to, but it actually helps align client requests with the correct port # to use, if the port # is not explicitly assigned (similar to how website bindings help alleviate the same issue on an IIS web server that hosts multiple websites).
This connect item is what gave me the clue about the SQL Server Browser service: https://connect.microsoft.com/SQLServer/feedback/details/589901/unable-to-connect-on-localhost-using-fqdn-machine-name
when you use wstst05\sqlexpress as a server name, the client code separates the machine name from the instance name and the wstst05 is
compared against the netbios name. I see no problem for them to match
and the connection is considered local. From there, we retrieve the
needed information WITHOUT contacting SQL Browser and connect to the
SQL instance via Shared Memory without any problem.
when you use wstst05.capatest.local\sqlexpress, the client code fails the comparison of the name (wstst05.capatest.local) to the
netbios name (wstst05) and considers the connection "remote". This is
by design and we will definitely consider improving this in the
future. Anyway, due to considering the connection remote and the fact
that it is a named instance, client decides that it needs to use
SQLBrowser for name resolution. It attempts to contact SQL Browser on
wstst05.capatest.local (UDP port 1434) and apparently that part fails.
Hence the error you get.
The reason for the "SQL Server Browser" service from TechNet (emphasis added by me): https://technet.microsoft.com/en-us/library/ms181087(v=sql.120).aspx
From the "Using SQL Server Browser" section:
If the SQL Server Browser service is not running, you are still able
to connect to SQL Server if you provide the correct port number or
named pipe. For instance, you can connect to the default instance of
SQL Server with TCP/IP if it is running on port 1433. However, if
the SQL Server Browser service is not running, the following
connections do not work:
Any component that tries to connect to a named instance without fully specifying all the parameters (such as the TCP/IP port or named
pipe).
Any component that generates or passes server\instance information that could later be used by other components to reconnect.
Connecting to a named instance without providing the port number or pipe.
DAC to a named instance or the default instance if not using TCP/IP port 1433.
The OLAP redirector service.
Enumerating servers in SQL Server Management Studio, Enterprise Manager, or Query Analyzer.
If you are using SQL Server in a client-server scenario (for example,
when your application is accessing SQL Server across a network), if
you stop or disable the SQL Server Browser service, you must assign a
specific port number to each instance and write your client
application code to always use that port number. This approach has the
following problems:
You must update and maintain client application code to ensure it is connecting to the proper port.
The port you choose for each instance may be used by another service or application on the server, causing the instance of SQL
Server to be unavailable.
And more info from the same article from the "How SQL Server Browser Works" section:
Because only one instance of SQL Server can use a port or pipe,
different port numbers and pipe names are assigned for named
instances, including SQL Server Express. By default, when
enabled, both named instances and SQL Server Express are configured to
use dynamic ports, that is, an available port is assigned when SQL
Server starts. If you want, a specific port can be assigned to an
instance of SQL Server. When connecting, clients can specify a
specific port; but if the port is dynamically assigned, the port
number can change anytime SQL Server is restarted, so the correct port
number is unknown to the client. ... When SQL Server clients request
SQL Server resources, the client network library sends a UDP message
to the server using port 1434. SQL Server Browser responds with the
TCP/IP port or named pipe of the requested instance. The network
library on the client application then completes the connection by
sending a request to the server using the port or named pipe of the
desired instance
I had a different problem from what all of the answers so far mentioned!
I should start off by saying that I had it in Visual Studio, and not SQL Server Express but the solution should be exactly the same.
Well, god, it's actually really simple and maybe a bit foolish.
When I tried to create a database and Visual Studio suggested the name of the SQL Server it gave me my Windows username and since it's actually the name of the server I went for it.
In reality it actually was my Windows username + \SQLEXPRESS. If you didn't change any settings this is probably yours too. If it works, stop reading; this is my answer. If it doesn't work maybe the name is different.
If, like me, you only had this problem in Visual Studio to check what is yours follow these steps:
Open SQL Server Management Studioicon.
If you don't see your server (docked to the left by default) press F8 or go to View -> Object Explorer.
Right click on the name of the server and choose Properties (The last item)
At the bottom left you can see your server's actual name under "Server" (not Connection, but above it).
This is the name of the server and this is what you should attempt to connect to! not what Visual Studio suggests!
One more thing to check is that you have spelled the named instance correctly!
This article is very helpful in troubleshooting connection problems: How to Troubleshoot Connecting to the SQL Server Database Engine
In my case the database was running on non standard port. Check that the port you are connecting is the same as the port the database is running on. If there are more instances of SQL server, check the correct one.
All you need to do is open the relevant port on the server's firewall.
Having problems connecting to SQL Server?
Try disconnecting firewall.
If you can connect with firewall disconnected, may be you miss some input rules like "sql service broker", add this input rules to your firewall:
"SQL ADMIN CONNECTION" TCP PORT 1434
"SQL ADMIN CONNECTION" UDP PORT 1434
"SQL ANALYSIS SERVICE" TCP PORT 2383
"SQL BROWSE ANALYSIS SERVICE" TCP PORT 2382
"SQL DEBUGGER/RPC" TCP PORT 135
"SQL SERVER" TCP PORT 1433 and others if you have dinamic ports
"SQL SERVICE BROKER" TCP PORT 4022
I installed SQL Server 2012 on Windows server 2012, I can connect to the server only if I write . in the server name field.
But I can't connect using the server name MSSQLSERVER.
I am trying to connect using SQL Server Management Studio from the same machine.
I checked that TCP/IP is enabled, IP2 is enabled, port 1433 is configured for all IPs, added an inbound rule for port 1433.
Also tried restarting both the SQL Server service and SQL Server browser service multiple times, but no luck.
Any ideas on what could be causing this problem?
Wow, this is an old post. Still I'm going try to answer this just in case someone else is wondering.
The Short Answer
MSSQLSERVER is typically not used as the name of a Server hosting the SQL Server Object (often referred to as SQL Server). Since you are using SSMS, you need simply define the name of the SQL Host--the actual NetBIOS name, or FQDN, or IP address of the host.
If no instance was created during installation
Server Name: ServerHostName
If an instance was created during installation
Server Name: ServerHostName\InstanceName
or IP address
Server Name: ###.###.###.###\InstanceName
If a port was defined other than the default port of 1433
Server Name: ServerHostName,####\InstanceName
The Long Answer
First a question. Is the MSSQLSERVER the actual NetBIOS name of your server? When talking about a SQL Server, it can be a little confusing at times as the name SQL Server is used to describe the host as well as the SQL Server Object (which is what most people are referring to in this context).
When using a tool like SSMS to connect to the SQL Server, you are first connecting to the host server, and once connected, you will connect to the SQL Object itself. The "." is not an object, or is not a valid SQL server name, unless you named your SQL server ".".
Regarding the instance, this is usually defined during the installation of the SQL Server (the object). Post installation, if you forget or simply do not know the name of the instance, the fastest way to determine what the instance name of your SQL server object is, is by checking system Services.
services.msc
Take a look at the SQL Services that are running. If you created a SQL instance during the installation of the SQL server object, then the instance name will be in (): i.e. (SQLInstance). On the same token, if you create multiple instances on the same server, then you will see multiple service names like,
Default Instance
SQL Server
With Instances
SQL Server (SQLInstance1)
SQL Server (SQLInstance2)
That should answer an issue where you can connect to one instance, but not another if one instance is running but the other is not.
If you did not create a SQL instance during installation, then the default SQL instance will always be MSSQLSERVER, and you will not need to define this in the Server Name spot of the SSMS.
I hope this helps.
It's a typical problem.
Just use cliconfg.exe to create alias with tcp/ip protocol.
If unsure do the same alias for 32 and 64 bit.
The 64 bit version is found in:
C:\Windows\System32
The 32 bit version is in:
C:\Windows\SysWOW64
In General tab enable TCP/IP.
In Alias, create a new alias, insert the name you prefer (with named istance) and select TCP/IP as network libraries.
As server name put the ip and 1433 as port. Don't leave "dynamicaly determine port" selected.
Source for cliconfg locations: http://sqlblog.com/blogs/tibor_karaszi/archive/2009/09/08/sql-client-config-32-and-64-bit.aspx
Try to enable the SQL Browser service.
The port number in SQL named instance is dynamic
SQL Brower uses UDP port 1434 to send the correct TCP port to the client.
If your SQL server instance is a default instance, you can login with the following as the Server name:
. (period)
LAPTOP-JDRDGF9T (the name of your PC)
localhost
127.0.0.1
If it on the other hand is a named instance, you login with localhost\<INSTANCE_NAME>, instance name normally being SQLEXPRESS.
You can Go to SQL Server Configuration manager >> SQL Server Network Configuration >> Protocol for MSSQLSERVER
OR
SQL Native Client configuration >> Client Protocols
In the right pane split page you will have to enable and disable the followings:
>> Shared Memory Enable this
>> Named Pipes Enable this
>> TCP/IP Enable this
>> VIA Disable this
Also, Check whether you have checked the Mixed mode authentication or not.
I'd like to connect to a local instance of SQL Server on another machine within the same network, and am wondering if it's even possible.
For example, say we have Machine01 and Machine02, both on the same internal network. I have several IIS websites setup on Machine01. If I log onto Machine02 and query the URL of one of the websites on Machine01 in in internet browser (say http://Machine01:9000), the website will load just fine. This has me thinking that it might be possible to construct a connection string to access the local database on Machine01 from Machine02. Is this possible?
I have Allow remote connections to this server checked in SSMS.
I've tried this connection string:
Server=Machine01;trusted_connection=true;Database=MyDB;Persist Security Info=True
Your connection string is correct in that the Server is the target computer name, and the premise of what you're trying to do is certainly correct and quite possible.
However make sure that the firewall on Machine01 is set to allow inbound traffic on the LAN from the SQL Server port (by default, 1433).
Also, the trusted_connection bit may not work, depending on how you have your users set up. If the user account on Machine02 a trusted user account on Machine01? If in any doubt, set up a SQL Server user account on your Machine01 SQL server, make sure you have SQL connections enabled (Server properties -> Security -> SQL Server and Windows Authentication mode), and pass across the SQL user name and password in the connection string instead...
You might try setting up a linked server, I find it to make the queries much easier. Here is some information on how to set it up.
I am developing a application for a small user group and decided to use sql express.
So the design as normal is sql express will be hosted in one machine(as server machine) and users client app will connect to sql-express host machine for accessing db.
Now the problem is remote clients are not able to connect the db, but host machine can access the db. Can someone please help if you have tried this before ??
Connection string used is as below, do we need to change the connection string ?
Data Source=Hostname\SQLExpress;Integrated Security=true; AttachDbFilename=|DataDirectory|\mydb.mdf;User Instance=true;
Note: Users are not domain connected they are LAN connected.
The database service is probably not setup to listen on TCP port 1433 by default for security reasons. You need to use the configuration utility to enable remote access. You also need to make sure that port is not being blocked by a firewall. These instructions for SQL Server 2005 are useful.
If the users are not running under a domain account I believe you will have issues with authentication. You may want to add them to a domain, or enable SQL Server (password) authentication. After enabling this you can specify a username and password via the connection string. You need to make sure that the user exists and has access to the appropriate tables, views, or stored procedures.
By default, SQL Server does not permit remote connections. You need to change this via the Server Configuration Manager in the Start Menu.
When setting up a system that requires a remote computer to access SQL 2008 stored on another computer in the same domain, I'm running into the following error:
The server was not found or was not accessible.
Verify that the instance name is correct and that SQL Server
is configured to allow remote connections.
When I installed SQL Server, I was sure I set up the system just so. How can I troubleshoot this?
I appreciate this thread is old now and already has an accepted answer, but I found a slightly different solution with regards to this issue that others may find useful. From reading this issue description I found that there were two SQL Server services in the standard Windows Local Services control panel: MSSQLSERVER and SQLEXPRESS (see below).
I found that SQLEXPRESS was running, but MSSQLSERVER was not. So I simply started that service, and I was able to connect to SQL Server again.
A couple of things to try...
check the Configuration settings to ensure that the TCP protocol is enabled.
try accessing the remote server via IP instead of the server name, this has worked for me in the past (oddly).
I'm assuming its running on the default port, if it isnt then you will need to specify the port number after the server-name / ip separated by a comma:
sql-server-name,{port}
Look at the name of the SQL server instance and make sure it is what you are using to connect to it. Also, look at the SQL Server Network Configuration under Configuration Tools. I worte an article about a very similar problem (if not the same) here:
Having had this a few times even with named pipes the first thing I always try is pre-pending the server name before the named instance; so SERVER\namedinstance. You can manually overwrite the dropdown values in the connect . So ideally in the setup it should have a brief tip below the named instance box like Enter SERVER\namedinstance. Although knowing MS if you entered this you'd probably end up with SERVER\SERVER\namedinstance...!
You can also use the browse option (bottom of server dropdown) and if you're lucky it may be in the 2nd tab (Network Servers) - even if it's a local install.
The program you are running needs to be running under an account which has access to the network (and depending on protocol chosen, may need access to the SQL Server by role or whatever). This error indicates that it is not finding the server on the network by name or IP.
The most common case I have seen this is when you have a web app running under a local account which does not have network access attempting to access SQL Server on another machine.
If you have access to the server that SQL Server is running on, you can try:
-Opening SQL Server Configuration Manager
-In the left pane, click 'SQL Server Network Configuration' and then 'Protocols for [instance name, possibly SQLEXPRESS]'
-Right click TCP/IP again and you'll see the port used. Mine was listed under IPAll/TCP Dynamic Port.
-In SQL Server Management studio add the port name to your connection string as follows:
if you were connecting to:
MYSERVER\SQLEXPRESS
the port is specified as
MYSERVER,2071\SQLEXPRESS