Just updated to IntelliJ 12 from 11. I can't find
deployment feature anymore.
Previously it was in menu Tools > Deployment now its gone. I can't find it in plugin list as well. However according to the Web Help it should be there.
Any idea how to enable it?
EDIT:
I have ultimate edition.
Make sure that Remote Hosts Access plugin (that's the actual name for Deployment functionality) is installed and enabled (though it should be installed and enabled by default, as it is standard functionality .. unless you did some re-configuration at some point (e.g. during upgrading)).
You can also check idea.log (Help | Reveal log in ...) -- it will have a list of all loaded plugins so you can verify if it's loaded or not.
Related
I'm working on multiple projects at the same time which are inter dependent. Sometimes, when one developer pushes updates to one project (for example Liquibase changes), they are picked up by my IntelliJ which immediately complains about missing columns when I restart the project. I did not explicitly issue any fetch/pull or update request against the remote repository. This is kind of annoying because I am then forced to pull all the new changes locally.
I remember my old IntelliJ version behaving normally (2019) so this is a new "feature" I guess? How can I disable it?
Could you please share screenshots of an issue? IDE doesn't run pull/fetch or upgrade automatically if you are using Git, but there is a chance that you may have Git Toolbox plugin installed and it has a feature for Auto-fetch and you need to disable it in settings
I am running Eclipse Luna 4.4.1 with Worklight Studio 6.2...
I have made changes to my Worklight project. For some reason, I cannot get these changes to be seen/previewed when opening in the Worklight Console...
I have made simple changes such as adding print (console.log) statements to see if these changes are making it out to the console... I have even removed design elements to see if I can get this preview to error out...
Here is what I do:
Highlight the app folder (the folder under the "apps" folder) and right-click
Select Run As > 2 Build All Environments
Once that is complete, I highlight the project folder (the topmost folder in the project) and right-click, selecting Open Worklight Console, which opens the console in Firefox
Click the Preview as Common Resources link in the Console
The "old" code/project runs -- no changes appear
I have tried Cleaning the project, closing and re-opening Eclipse, rebooting my machine, etc. but nothing seems to shake this up. Worklight seems to use the "old" code no matter what I do in Eclipse...
Is there a setting on Worklight I may be missing?
Starting Worklight 6.2 you do not need to either build or deploy your application in order to see changes made to web resources.
The following should suffice:
Create a Project and application
Run As > Run on Worklight Development Environment
Open console, view the application (keep this tab open)
In Eclipse, change some resource (image, CSS, HTML, JavaScript)
Return to the previously opened tab and refresh it
The change should be visible to you.
Something to try:
Close Eclipse
Open your TMPDIR and delete the wlBuildResources folder
Open Eclipse, try again
You can also try adding a mobile environment to your application; there are some reports this some times, show how, helps 'refreshing' the web resources used while previewing applications
You can also make sure you are using the very latest 6.2.0.01 iFix; there were preview-related fixes in the past. You can get it from IBM Fix Central website (assuming you are an IBM customer/business partner; for evaluation purposes you should download the latest available version, from the Eclipse Marketplace - v6.3)
Note that Run As > Build all environment does not actually deploy your modified web resources to the server, it only generates the .wlapp for later consumption elsewhere, so I suggest to follow my steps at the very top of this answer, by using Run As > Run on Worklight Development Server, and later on simply save (ctrl/cmd-s) and then go to the console to verify the changes are there.
I'm just getting started with some of the samples at the Getting Started site, working with the Developers Edition. Whenever I Open Worklight Console, the eclipse environment abends. I'm sure I missed a set up item, but all seemed to install well. I appreciate any help / direction. Thanks.
I tried to post an image of the error, but stackoverflow indicates I need 10 reputations to post an image. Go figure.
The first line is Java was started but returned exit code=8096
There are some hits on this indicating that the license may not be compatible with the Rational license installed. Not sure what to do with that.
There's another post indicating Environment Variable corruption, but I don't have the corrupt Temp environment variables indicated.
StackOverflow has a FAQ explaining what one can and cannot do and when. It makes sense. Read it.
Did you at least create a new Worklight project and application?
If you do that and run the application by right-clicking on the application in the project tree and choose Run As > Run on Worklight Development Server this will: start the server + build the app + deploy the app.
Then you can right-click on the project icon and choose Open Worklight Console and you will see the console...
So unless you have some errors preventing the server from loading, the above should work.
Host the image elsewhere, like imgur.com
Explain what you have installed in your Eclipse. Which Eclipse is it? Did you install only Worklight Studio, or another plug-in in addition? Which?
What are those "hits" you mention? Elaborate.
Searching for the exit code in Google, I see the following IBM tech notes:
http://www-01.ibm.com/support/docview.wss?uid=swg21303648
http://www-01.ibm.com/support/docview.wss?uid=swg21567836
http://www-01.ibm.com/support/docview.wss?uid=swg21627887
Perhaps one of them is relevant for you as well.
If you have followed Idan's advice to Run on Worklight Development Server and it is still not started, try this:
Switch to the Servers view (on the bottom pane of Eclipse by default).
Check your Worklight Development Server status
Right-click and select Clean...
Select OK when prompted to discard all publish start.
Redeploy your app using Run As > Run on Worklight Development Server
I am not sure if this would clean up your environment variable error message as I have not seen that one, but it has helped with several other errors that have caused my server to not start or run properly. (The most common one I get is an Out of Memory in the server.)
I have a Worklight 6.0 project that uses the new Dojo 1.9 libs, I created an external dojo project, like the documentation suggested, then, in the main project properties, under "Dojo toolkit", it references this dojo19 project.
The project works on the local server, then I did "Run As" | "Build for Remote Server...", and entered the correct domain:port and context path, clicked Build, the *.wlapp files were updated. (I've also updated the settings for publicWorkLightHostname / publicWorkLightPort / publicWorkLightProtocol in the "Environment Entries for Web Modules" in the installed war to match the remote server names/port/protocol.)
But, after deploying both war and -all.wlapp file, accessing the app I get JS errors when it tries to refer to the dojo19 library:
The page at
https://<myIP>:9443/<myproject>/apps/services/www/ /mobilewebapp/default/IODMobile.html
ran insecure content from http://localhost:64441/dojo19/<myproject>/IODMobile/mobilewebapp/dojo/nls/core-web-layer_en-us.js.
The dojo19 is the project name in my Worklight developer workspace that I referred to above.
Why is it trying localhost? Seems there's a missing step here in deploying the dojo library project into Worklight.
Where are you trying to preview the application when you get the error message?
See the changes in Dojo in Worklight 6.0
If launching the application in emulator/simulator/device, see Billy Rowe's answer in this question
Partial copy/paste:
Step 1: Verify your application works in the Mobile Browser Simulator
with Provide Library Resources checked. If the Console log is showing
resources being served from the server, then these have to be copied
to your application before deploying to AVD or a device
Step 2: After you think you have all Dojo/resources within your
project, uncheck Provide Library Resources and test it again in MBS.
If it fails in MBS, then something is missing in your application that
is in the library/server. You can check Provide Library Resources and
retest to see if it shows you what that is. Not all resources are
shown, e.g. if there's a missing CSS file.
Also I would suggest to do all of this in the Development environment (that is, in Eclipse) before starting to deploy the .war file and .wlapp file etc... (which, BTW, I hope you're doing based on the new instructions for Worklight 6.0)
In the information center, it will show you how to uncheck the Provide Library Resources in the Console Log.
I think what you're running into is:
1) Something is being served from the Dojo Library/Server
2) A bug in 6.0 that used "localhost" instead of the IP of the host (your machine running eclipse). This is fixed in the 6.0 iFix. With this fix, you can run your app external to Studio and still use the Dojo Library/Server. Without this fix, you must have everything you need within your app.
Can you install the iFix and let us know if that fixed the problem?
In a project we a forced to use IBM RAD and Webspher Application Server (6.1).
Setting up the development environment is currently described in about 10 pages of wiki documentation and takes about a day if you don't do any mistake. The main parts are:
Installing the IBM Installer;
Use it to install RAD
Install a patch to the Installer;
use it to install half a dozen patches to RAD
create a network drive pointing to ...
checkout project source to ...
install WAS
configure the a WAS instance with two jdbc drivers, 6 datasources, a queue ...
I think you get the idea
I'd like to automate that process (or at lest 95% of it) to something like.
start script x.
On prompt enter a directory with at least yGB of memory available.
Get yourself a cup of coffee
start working.
What are the proper tools to get this working? Should I use something like puppet and chef? Or is that overkill and I can just zip the installation directory and change 2 registry entries?
Has anybody experience with this? Any pointers to get started?
You can script the configuration of WAS using wsadmin:
http://pic.dhe.ibm.com/infocenter/wasinfo/v6r1/index.jsp?topic=%2Fcom.ibm.websphere.base.doc%2Finfo%2Faes%2Fae%2Fwelc6topscripting.html
It is some effort to learn how to do so but in the end it saves a lot of time. You need to use Jython or Jacl to do so.
WAS profiles can be created headless with a response file. Use manageprofiles.bat in bin directory of WAS to do so.
Regarding RAD installation you can install the IBM Installation Manager version you need to install the patches right away and then install everything in one shot. Add the fixes you need as Repositiories right from the beginning. The fixes will be installed instead of the old versions in this case. You should have the base images and all fixes on the local disk to do so.
The installation of RAD itself can also run in headless mode but I don't have any experience in doing this.
The configuration of the RAD workspace is the next thing you want to automate. This is not so simple to do. The simplest thing you can do is to export the workspace preferences of a workspace that contains all settings to an eclipse preference file (.epf). File -> Export
This is not a complete solution but may help you a bit. Be sure to keep all settings in just one file and import that into a fresh workspace.
Use Notepad++ TextFX plugin to sort the settings in the epf file. You can then figure out which settings you need just by looking at them.
More control over the workspace settings and automated conifiguration requires accessing eclipse internal APIs and some coding.
Regarding the the project sources it depends on the SCM you are using.