The Filename given to store the results of Jmeter Summary report should (as I understand) store the same info I see on the screen . But instead it stores a short response of the HTTP request sent like this :
<httpSample t="72" lt="66" ts="1305479685437" s="true" lb="login" rc="200" rm="OK" tn="Virtual users 1-1" dt="text" by="12978">
I defined the Filename as a .csv file
Any idea how to turn it into a replica of the screen Summary report ( sample, average, Min, Max,Std.Dev etc) ?
To make a summary report of the JMeter output you need to do the following:
Make sure that in the jmeter.properties file the 'Results file configuration' is not in comment and all the fields you want to use are marked as true as shown below.
<pre><code>
#---------------------------------------------------------------------------
# Results file configuration
#---------------------------------------------------------------------------
# This section helps determine how result data will be saved.
# The commented out values are the defaults.
# legitimate values: xml, csv, db. Only xml and csv are currently supported.
jmeter.save.saveservice.output_format=csv
# true when field should be saved; false otherwise
# assertion_results_failure_message only affects CSV output
#jmeter.save.saveservice.assertion_results_failure_message=false
#
# legitimate values: none, first, all
#jmeter.save.saveservice.assertion_results=none
#
jmeter.save.saveservice.data_type=false
jmeter.save.saveservice.label=true
jmeter.save.saveservice.response_code=true
</code></pre>
Then configure the Summary Report by clicking on Configure button.
It's possible, if you want to turn it into a replica of the screen Summary report ( sample, average, Min, Max,Std.Dev etc) just click the Save Table Data button and then save it as .csv format.
You will get .csv file like this :
Jp#gc has command-line tool for exporting jmeter reports to csv. Feed saved jtl file to it and use Aggregate report mode.
See. JMeterPluginsCMD Command Line Tool docs for help
Related
I have created a test that reads the users from a CSV Data Set Config in JMeter.
For example when i run a test, JMeter reads first 20 users in the CSV file.
Then if i will run the same test again, JMeter again reads the first 20 users in the CSV file.
But i want JMeter to read 20 users but must start the reading from 21st user, and so on.
Is there a way to make this possible?
As per CSV Data Set Config documentation:
By default, the file is only opened once, and each thread will use a different line from the file. However the order in which lines are passed to threads depends on the order in which they execute, which may vary between iterations. Lines are read at the start of each test iteration. The file name and mode are resolved in the first iteration.
So there is no way to specify the "offset" for reading the file, the options are in:
Use __CSVRead() function where you can call ${__CSVRead(/path/to/your/file.csv,next)} as many times as needed to "skip" the lines which are already "used"
Use setUp Thread Group and JSR223 Sampler to remove first 20 lines from the CSV file programmatically
Go for Redis Data Set config instead where you have Recycle Data on Use option, if you set it to False the "used" data will be removed
I have a jmx script which saves the results to a CSV file.
I need to see the 'failureMessage' field in the CSV especially when the 'success' column says 'false' as in the below example. But the failureMessage column always appear as blank irrespective in the csv
Example -
timeStamp|time|label|responseCode|threadName|dataType|success|failureMessage
02/06/03 08:21:42|1187|Home|200|Thread Group-1|text|true|
02/06/03 08:21:42|47|Login|200|Thread Group-1|text|false|Test Failed: expected to contain: password etc.
I tried looking up the jmeter.properties file to check the below which is set to true. But it still doesn't save the message to failureMessage in the csv.
assertion_results_failure_message only affects CSV output
jmeter.save.saveservice.assertion_results_failure_message=true
I cannot reproduce your issue using:
Latest JMeter 5.2.1
With the default Results File Configuration
Running JMeter in command-line non-GUI mode
Demo:
If you cannot see custom assertion failure messages your setup violates at least one of the above 3 points.
Try adding assertions with your requests and you will find it in your results in case of assertions getting failed.
What I want to do is the following...
I want to divide the input file into registers, convert each record into a
file and leave all the files in a directory.
My .csv file has the following structure:
ERP,J,JACKSON,8388 SOUTH CALIFORNIA ST.,TUCSON,AZ,85708,267-3352,,ALLENTON,MI,48002,810,710-0470,369-98-6555,462-11-4610,1953-05-00,F,
ERP,FRANK,DIETSCH,5064 E METAIRIE AVE.,BRANDSVILLA,MO,65687,252-5592,1176 E THAYER ST.,COLUMBIA,MO,65215,557,291-9571,217-38-5525,129-10-0407,1/13/35,M,
As you can see it doesn't have Header row.
Here is my flow.
My problem is that when the Split Proccessor divides my csv into flows with 400 lines, it isn't save in my output directory.
It's first time using NIFI, sorry.
Make sure your RecordReader controller service is configured correctly(delimiter..etc) to read the incoming flowfile.
Records per split value as 1
You need to use UpdateAttribute processor before PutFile processor to change the filename to unique value (like UUID) unless if you are configured PutFile processor Conflict Resolution strategy as Ignore
The reason behind changing filename is SplitRecord processor is going to have same filename for all the splitted flowfiles.
Flow:
I tried your case and flow worked as expected, Use this template for your reference and upload to your NiFi instance, Make changes as per your requirements.
I have a website which needs to upload multiple images at a time. So I want to know what is the process of posting image file through JMeter?
You'll need the following:
In HTTP Request Sampler:
Select "POST" method from drop-down.
Check "Use multipart/form-data for POST" box
Provide correct input name, MIME type and path for the file to be uploaded.
See Upload and Download Scenarios with Apache JMeter guide for more details.
If you need to upload multiple images best option is to go for a CSV Data Set Config element in Jmeter.
First, add the full path of the images you want to upload comma separately in a file (.csv) as below.
eg: D:\User\Images\img1.png,D:\User\Images\img2.png
Then, add a CSV Data Set Config element most preferably to the top of the script
Next, configure the below elements in the CSV Data Set Config element
Filename: full path to the csv file
Variable names: “column name” in the csv file if you have added one or any variable name if you don't have a column name (eg: images)
Note: Make sure to change the delimiter and other optional parameters as required.
Finally, in a HTTP Request you can use the parameter ${images} to call the images. The CSV Data Set Config element will read the image names from the CSV file and set them in the variable called "images".
Refer the below guide for more information.
https://www.blazemeter.com/blog/how-test-image-upload-functionality-jmeter
I'm using JMeter for performance testing and generate an CSV file for data analysis.
How should I add JMeter Variable names to the CSV output? It seems that only pre-defined columns can be added (see screenshot).
This is my log-file:
14/03/2014,Login,OK,982
14/03/2014,Search,OK,2182
14/03/2014,Login,OK,3982
I would like to add a column with the ${username} to generate something like:
14/03/2014,Login,OK,982,user1
14/03/2014,Search,OK,2182,user7
14/03/2014,Login,OK,3982,user9
Try to pass sample_variables property, for example as command-line parameter -Jsample_variables=username,some_other_var
Also see FlexibleFileWriter plugin if you need custom formatting http://jmeter-plugins.org/wiki/FlexibleFileWriter/?utm_source=jmeter&utm_medium=helplink&utm_campaign=FlexibleFileWriter