I am New to SSIS config side. I have created one package with its config file. My Project placed into my account folder at server. but I created the config file which I placed at shared drive folder and also copy the mypackage.dtsx file into another shared folder.
Now I have ran the package with dtexec.exe /f "mypackage.dtsx" without using config file even though it successfully run.
even I have changed some of the property into the config file and ran the package with use of the dtexec.exe command(mentioned above) and it was executed successfully.
So I have a question that, Do I need the config file at dtexec.exe command line because I can run my package by "dtexec.exe /f "mypackage.dtsx" " too?
I saw the syntax of dtexec.exe /f "package.dtsx" /config "myconfig.dtsconfig"
Please guide me...Does the package contains the config file and its changes?
The package will remember it's saved settings. The benefit of a config file is that if you need to override/shange the settings that are contained in it, you can do that without needing to open, fix, and redeploy your package. A config file is not ever necessary, it is just a convenience to you the developer, especially if your environment has a strict change management policy. It is usually easier to change values in a config than to edit and redeploy a package under strict change managment.
CLARIFICATION
It appears from your question that you may be thinking that when you change the config it will change your package regardless of including your config in your execution. All of the information from the config will be in the package at the time you save it, but it may differ from what is in the config. If you run without config, you are running exactly what is saved in the package. Package executions work like this:
Load package with all configurations from the saved .dtsx file
Check for configurations to load.
Load configuration in memory and overwrite values loaded from .dtsx package.
Execute.
This is simplified, and there are other things going on, but at the basic level this is accurate.
Related
I am installing a package manually on my own system because I need to make some changes to it that aren't available in the basic version in my package manager. I also am trying to keep packages installed locally if possible, so I'm installing it with prefix=$HOME/.local instead of the more common prefix=/usr/local.
When I do this, I have no problem executing the program from my terminal, because I added ~/.local/bin to my PATH and the package was installed with relative paths to its shared libraries (i.e. ~/.local/lib/<package>). Executing from the command line is no problem, but I want to be able to access it from the favorites menu in gnome, and for that I need to make use of the <package>.desktop file.
I could hard-code the path to the executable in the .desktop file itself, but when I pull a later version down and re-install it, I'll have to redo those steps. I was wondering if there's a way to avoid that.
I've tried symlinking the executable to a directory where .desktop files do have included in their path, and the application is correctly treated as a GUI option, but launching the executable results in an error trying to find a shared library. I think this has to do with how cmake handles rpaths, which to my understanding is a way of relatively linking executables with their required libraries.
I think what I want to do is have PATH inside a .desktop file include ~/.local/bin, without changing the .desktop file itself. Can I alter the 'default' path used in accessing a .desktop file?
The answer to my question was found in the Archwiki:
Specifically, I needed to add ~/.local/bin to my path in ~/.xinitrc. Now my graphical programs work as expected.
I have created an SSIS package which uses a for each loop container and an Excel connection string that I have created from a variable so I can loop through multiple files. My package works without issue and if I have a number of files in my source folder and I simply execute the package it works perfectly looping through all the files doing what I want it to do.
The issue I have is when I deploy the package, If I have files within my source folder it executes without error but when you look at the source folder it still has the files in. When digging a bit deeper in to the package reports it looks like it is reporting that there were no files found. If I manually execute the dtsx file in runs without issue and imports everything as it should.
Is there any reason why after deploying the package it is unable to recognise the files or the variable that I store the file name in?
Sounds like it could be permissions related. Does the SQL Server Service account have permissions to the directory where the files are stored?
I'm creating a WIX installer for a C# application.
In the application I use System.Configuration.ConfigurationManager.AppSettings[Setting1] to get settings.
My question is, where must I place the program.exe.config file on the machine in order for it to work?
I can't place it with the program in ProgramFiles directory, since those files are read-only.
I tried:
Configuration config = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.PerUserRoamingAndLocal);
config.AppSettings.Settings[Config1].Value = "Value1";
config.Save();
Unfortunately I don't know where it's looking.
Thanks your replies, Trevy
It should be in the same folder of the program.exe. Use wix to copy both program.exe and program.exe.config to the required folder.
If you need to edit the configuration file during the installation you will need to do it using a custom action in wix. Make sure you pass the file path to the custom action and write the code to read the configurations in that file and edit.
The problem isn't that the files there are readonly - the problem is that you are trying to update files in the Program Files folder with your config.Save, and you can't do that if you are a limited user, and you are always limited (even if you are admin) unless you elevate. The short answer is that:
If your app routinely updates files in restricted areas then it probably needs elevation, so give it an elevation manifest.
If however you require you app to be used by limited users and allow them to update that config file then don't install to Program Files. Choose User Appdata folder, for example. Windows is probably using your config file during program startup, so you can't separate it from the exe.
When I was creating an installer for my app, I found I couldn’t save my settings.
The reason is because the Program Files repository, from a practical point of view, is read-only (Applications should never run with elevated permissions). When installing a program, the only time we modify the MyApp.exe.config file is at installation/upgrade/repair time.
The config file has many sections. One of them is userSettings. This is where we store any data we need to modify during the lifetime of the application. When run for the first time, Windows creates a hidden file in the user’s AppData folder. That is why we can save user settings, even though the config file is in the same directory as the MyApp.exe
So the answer is, if we run into permission errors when trying to save our settings it means we are writing our settings to the wrong section of the config file. We need to place it in the userSettings section and nowhere else.
For convenience, Visual Studios has a settings editor (the settings tab of the properties page). It allows you to create strongly typed user and application settings. The generated class lets you save user settings, but not application settings for the above reasons.
If I run a package from the Management Studio, and specify a configuration file, everything works as expected. I can also set the package to get it's config path from an environment variable, and that approach works as well.
However, if I try and run the package from the command prompt with DTExec I get the error:
Cannot load the XML configuration
file. The XML configuration file may
be malformed or not valid.
The command I'm using to execute the package is:
dtexec /conf ConfigurationDemo.dtsConfig /f Package.dtsx
I am running the dtexec from the folder where these two files reside. Is there an addtional switch or something that must used to get dtexec to behave the same was at the management Stduio in launching a package?
Have you checked the config file is a valid XML file? By the look of the error message there may be a problem with it. When you run it from SSMS is it using the same config file?
I have a project where I create a JAR which contains a bunch of classes with main() plus a set of scripts which set the environment to invoke them. Most of those are long running processes which log a lot (~10-20GB).
This means I have a pretty complex log4j.xml file which, being in src/main/resources/, goes into the JAR. When something breaks in the production system, I'd like to modify the logging on the fly for a single run.
So I came up with the idea to have a conf/ directory on the production and put that into the classpath, first. Then, I thought that it would be great if M2 would put the config files in there (instead of the JAR). But that would overwrite any manual changes during an automated deployment which I strongly dislike. I'm also not fond of timestamps and things like that.
So my next ideas was this: M2 should leave the config files in the JAR but create copies of the files with the name *.tpl in the conf/ directory. The admin could then copy a template to the basename to override the files in the JARs. .tpl-Files would be overwritten but that wouldn't hurt. Admins would have full control over which version of the log was active and they could run a diff to see whether any important changes were made.
Now the question: Has someone seen a plugin which automates this process? That is which creates a conf/ directory with all or a selected subset of everything in src/main/resources/ and which renames the files?
Best practice in Maven handling config files is to place them in a separate conf directory, and pack them in a binary assembly using the assembly plugin. Placing configuration files, like log4j.xml in the src/main/resources doesn't make sense, since it is not a true application resource, but more of a configuration file.
We cope with the overwriting, by packing the configuration files with the posfix .def. For example: myapp.properties is packed into the assembly as myapp.properties.def. When the person who uses the assembly unpacks it, it will not overwrite his original files. After unpacking he simply merges them by an external tool (we use meld in Fedora Core).
I may be missing something and this doesn't answer directly the question but did you consider producing a zip assembly of the exploded content of required artifacts (to be unzipped on the target environment)?
Sounds like you're attacking the problem the wrong way. Why not just run the application with -Dlog4j.configuration=/some/where/my-log4j.properties? If you want, you can add a command line flag to main() which invokes the PropertyConfigurator directly.