I am writing an iPhone app that is supposed to create a TableView with 5 buttons. Each button is supposed to open up a different TableView.
I am using storyboards for my application, and the storyboard view controller shows only one button, so how can I link each button in my app to a separate detailviewcontroller?
Thanks!
If you want each button to trigger different controller than you have to create 5 seque with different destination controller and than when button is tapped , use following function to show different controller.
– performSegueWithIdentifier:sender:
Give each seque a different identifier and based on which button is tapped ( can be check using button tag) perform different seque and hence show different controller...
To pass data between viewController which is a common task, i am surprised you have not done it before :
goto this link .
Related
I am trying to create a ver simple app in iOS 7. In this I need move back and forward using UIBarButtonItem. But when I am pressing back button it is loading a view but not showing all UI Controls properly basically the view is empty. in the below as I pressed any of the cell it will move to another view and load respective data.
On the pressing back button it should show earlier image but it is showing following view.
Please tell me where I am going wrong Thanks in advance.
It seems as if your second screen is presented modally. Then you need to make an unwind segue.
Add this code to the viewcontroller that should be returned to:
-(IBAction)backButtonUnwindSegue:(UIStoryboardSegue *)segue
{
}
then from your modal vc, in storyboard. Drag a segue from the "Back"-button to the Green "Exit"-icon and select the backButtonUnwindSegue-action
Check Out this:
Passing Data example
This is kinda long but I want to give as many details as possible.
I have created a status bar app. One of the things I've done is made it to where there is a "Settings" menu item that if you click on, an NSWindow pops up with 5 different buttons -- these buttons are tied to their own custom NSViewController so that if you click them, the View Controller changes, but the window remains the same, just like any other StatusBar app.
On one of the view controllers is a popup button with several user selectable options. If I add a button to the specific VC (view controller) and link that to an ibaction that pulls the selected index of the popup button, it works just fine (i.e. I select item 2, it logs item 2).
Now here's where things get. . . odd. I've created a submenu that would in theory allow the user to quickly change the selected item of the popup linked to my custom view controller. Think of this submenu as being labeled 1-4 and clicking one of those items would change the index of the popup button, however every time I try this and follow it up with a NSLog to ensure the button has changed, it ALWAYS reads zero, in other words, it NEVER changes.
Here's what I tried.
Just like with every other view controller I've ever used, I create a new object of my view controller (alloc, init), and reference the popup button object that i've created as a property. This compiles just fine, but returns only zero no matter what is selected.
I've tried calling the method that I know works (the button that is on the view controller containing the popup), but again, this returns only zero no matter what is selected.
Any advice would be greatly appreciated.
tl;dr: can't change a popupbutton on a view controller from the app delegate or nsstatusmenu item, it just always returns zero.
EDIT: I have found a work around since I can communicate to my app delegate just fine, I created an int property and set it to zero. From there, whenever my popupbutton on my VC changes, I change the value of the app delegate int property and just ensure that whenever the nib launches, it set's the selected item to the app delegate property. I feel there has to be a more straight forward way to just get the value of the popup and change it from the app delegate.
EDIT 2: Some code as requested. I realized I needed to point the the view controller by using initwithnibname from the app delegate and then load the view. Doing so allows me to pull the first object in the popup button, any subsequent changes are not recognized unless I do so via my test button on the view controller itself. Also, I'm adding values to my popup in my awakefromnib in the view controller.
searches_VC = [[Searches_ViewController alloc] initWithNibName:#"Searches_ViewController" bundle:nil];
[searches_VC loadView];
NSLog(#"Selected Title: %#",[[searches_VC profilePopupOutlet] titleOfSelectedItem]);
Playing around with some Objective-C (well, iOS) and have done the following... loaded some UIButtons programmatically into a UIScrollView. That works well. Though I've always just connected UIViewControllers together using control-click and drag. Now I've created buttons programmatically, I have no idea how to go from one view controller to another in a Storyboard because there is nothing to drag from!
I'm not really sure what code to post as such, because I haven't done anything that /nearly/ works or doesn't work as such. I get how to do it with XIBs. But I suppose the question is : 3 UIButtons have been created programmatically and I have 3 UIViewControllers. How do I access those ViewControllers using my UIButtons?
Thanks
In the Interface builder view control click and drag from the viewcontroller icon under the first view controller, to the middle of the second view controller. A segue will be created, selected the appropriate type.
Now select the segue and in the inspector give it a unique identifier (say 'myNewSegue').
Now in your first viewcontroller you can create a method that has the following code:
-(void)myButtonAction:(id)sender {
[self performSegueWithIdentifier:#"myNewSegue" sender:self];
}
And add this method as a target action to your button:
[myButton addTarget:self
action:#selector(myButtonAction:)
forControlEvents:UIControlEventTouchUpInside];]
A segue doesn't have to have a button at the leading end of it; you can instead draw it from an entire view controller to another. You can also give a segue an identifier, a string that's used as a name for that segue. Once you've done that, you can programmatically trigger that segue by calling -performSegueWithIdentifier:sender:.
To actually call -performSegueWithIdentifier:sender:, though, you'll need to connect the button to a target and action. If you've never done that, read the Event Handling Guide for iOS in your documentation.
I've set up a really simple project using storyboards including two views as shown here: http://i.stack.imgur.com/iRx21.png. The navigation can be done by either selecting a cell in the custom table view or hitting the back button labelled with "<<". Everything works fine except the following:
when I switch between the views, every time an instantiation happens. The profiling shows an increasing number of view objects. I would like to keep only one of each view and instantiation should be happen only once. What am I doing wrong? (I'm using ARC.)
Thanks in advance!
You should not link your back button to the parent view controller. This is what causes the new instantiation.
The way to go is to embed the table view into UINavigationController (in IB, choose Editor -> Imbed In -> Navigation Controller. Then change your segue to a Push segue. You can of course hide the navigation bar etc. to make things look exactly as you like. Then, link the back button to the controller with an IBAction and in the handler do a simple
[self.navigationController popViewControllerAnimated:YES];
This would be the appropriate logic of what you are doing. Of course, you can also push the web view modally and then handle the button click with
[self dismissModalViewControllerAnimated:YES];
I have 2 tabbars in my tabbar controller. I am currently in the second tabbar, after I click on a 'done' button, the tabbar controller needs to switch to the first tab and auto refresh the tableview in it.
I am able to execute on the first part
//Switch to the first tab's view
self.tabBarController.selectedViewController
= [self.tabBarController.viewControllers objectAtIndex:0];
However I need some advise on how to refresh the first view's tableview immediately after the switch is made. Any advise is appreciated.
EDIT: Updated requirement
Note: I do not want the view in the tabbar to reload everytime someone clicks on the tab. The reload should only happen in tab 1's tableview when
1) User is in tab 2
2) User clicks on 'Done button' in tab 2
3) App switches to tab 1 + Reloads the tableview in tab 1
Rationale is that the user will update some information in tab 2 which can only be viewed in tab 1. I want the user to be able to view the updated info immediately after switching to tab 1.
You could just do [tableView reloadData] in the first view's viewDidAppear: method?
EDIT: Editing to add additional data.
General caveat here, Apple tends to frown upon having custom UI Patterns like this. I'm not sure what your app is trying to do here, but you should mostly stick with switching tabs only if the user explicitly clicks on that tab. Have you looked at modal view controllers if you want to present a screen and get some data back, instead of having it in a tab bar?
If not, I guess you could have a solution where the first tab is a delegate of the second tab. When the button is clicked, you could call [delegate doneBtnClicked:] so the control shifts to the first tab. In that function, you could use the setSelectedIndex: to your current tab and call reloadData: on the table view.
You can send NSNotification after
pressing done button on second tab
and handle this notification on first tab controller.
So, create a DONE Button as a UIBarButtonItem, and in it's IBAction, do the following.
For reloading the tableView for the view in the first tab, put that tableView as that class' property , and reference the class like #class class1 , and create an object as a property class1 *object1 for View1 (Tab1) in the class for View2 (Tab2), and access the array1 using object1 like
[class1.object1.array1 reloadData];
And for bringing the view to tab one, use
self.tabBarController.selectedIndex = 0;
Thats pretty much it !
Alternatively you can also use a singleton class for this purpose.