I am trying to have two ALV in a tabstrip that editable by a buttom at toolbar.
There is a nice example at following page but it is a single ALV.
If we have two ALV how how to do lcl_event_receiver part? Do we need two of them?
Note: I am able to make teo ALV in tabstrip by looking at this code
You will either need a separate event handler for every control (or at least separate handler methods) or you add an implicit parameter named SENDER to the event handler methods. This parameter contains the reference of the control that triggered the event, so you can compare it to the two ALV grid references and decide which one triggered the event. (In my opinion, this leads to ugly code, but in the end, that's your decision.)
Related
I have a custom user form in Excel where the number of option buttons is dynamic, depending on what a user selects from a combo box. I have written a script that will add and format those option buttons with appropriate captions, groupname, etc. However, I would like it so that after those buttons are added dynamically, if a user clicks a button from a group just added, then more code will be executed. I am aware that one can create a custom class so that multiple userform controls are handled with one event handler, but I can't figure out how to get this to work with controls that were added dynamically to a form, after the form initialized. I am hoping this question makes sense. Thanks in advance for any help you can offer.
I have my form with a menu bar and space underneath to display my controls. One of the buttons in my menu bar is suppose to be a print button that prints a graph that's currently in a User Control I display in the form. If the graph was on the form in the print button's eventhandler I could just simply call
graph.printing.print(true)
which isn't going to work in my case since the graph is in the control and not the form.
How do I communicate with a User Control from the containing form and access or pass its variables when needed? I also have a status bar on the bottom of the form which would also need to get updated from the User Control, but I'll be able to deal with that if I got help with just this one part. Please bear in mind, I also have another User Control I'm going to add to the form which will also contain a graph which will need the same treatment as the other graph on the first control when the print button is pressed. I plan on swapping these two out so I have one form displaying one control at a time.
I got this idea from this answer: https://stackoverflow.com/a/18191630/2567273 but after further research I can't find anyone asking about the actual communication process between a form and the control it contains.
I think this answer is close to what I'm looking for, but I think it's leading me down the path to using panels instead of User Controls.
After typing this I noticed the closest answer to my question may be this, but that question has the child raising events and the parent responding while I have the parent raising the event and the parent has to get information from the child.
One way to think about this is Roles. Presumably you built this UserControl to handle the management of the data related to the graphs. As such you can think of them in the Role of a Graphs Specialist . Once you do that, printing them is actually just one more thing it should perhaps do.
The form on the other hand, is not special just because it happens to get receive the command from the user to print. Its role in this might simply to be to know which usercontrol to contact and which method to invoke:
Sub PrintGraphMenuClick....
Select Case something ' determinant as to which UC to contact
Case operation.Foo
ucFoo.PrintGraph
Case operation.Bar
ucBar.PrintGraph
Other menu options like Clear, NewGraph, Save and whatever else there is somewhat the same way. The Form's Role here may be to receive the command from the user and pass it along to the right control, invoking the correct right method and passing the correct parameters - that is not a trivial task.
Of course, rather than a MainMenu, the usercontols could alternatively implement a ContextMenu and even receive those commands directly.
Very often offloading an operation to something else results in so many properties, filenames, streams etc having to be moved from here to there that it becomes burdensome. In this case it is not like the MainForm has some special ability regarding printers that the UserControl cannot handle.
There is only one right solution:
1) Add an event to your user control.
2) Raise the event when the particular "thing" happens in the user control.
3) Attach a handler to the event in Form code.
4) Add code to update the bottom bar in the event handler.
How can we interact with custom forms and event receivers? How can we talk to custom fields (asp controls) within the custom form from an event recievers?
I searched but cant find something like that or maybe I am not using the right keywords.
In the event receiver you do not have access to any of the controls on a form. What you do have is access to the SPItemEventProperties object which has the BeforeProperties and AfterProperties, er... properties. These are hashtables which contain the names of the SPListItem's fields and their corresponding values (from the form or from the existing item). You can use the event receiver to inspect these values and take a particular action, or even cancel the event.
The idea is that I would have a set of forms, users would click through a "forward" and "back" button, and the current form would change to a different one. My issue is that I can write code that just pops up a new form, but im not sure how to do a "replacement" of my current form. How is this usually done?
What I did recently was to create a form with buttons already in place and a large panel to contain each step. The dialog would accept an initial step in the form of a IWizStep instance, and the things would roll from there.
Each step was a class exposing a UserControl responsible for the visual aspect of the step, while the logic itself was handled by the class (it was a little more complicated that that, but that was the general idea).
The IWizStep interface, implemented by the step and accepted by the dialog, was on the lines of:
Interface IWizStep
Event StateChanged As EventHandler
ReadOnly Property Control As Control
ReadOnly Property Title As String
ReadOnly Property CanMovePrevious As Boolean
ReadOnly Property CanMoveNext As Boolean
Function MovePrevious As IWizStep
Function MoveNext As IWizStep
End Interface
To put everything together, a controller class would know how to compose the steps necessary for each given action. Therefore I had a controller for, say, "Emit Order", which needed some 10 steps, and a controller for "Emit Orders in Batch", which needed only a couple of steps.
Create a set of UserControls, and add and remove them from a Panel in a single form. (and set Dock to Fill)
You could define a user control which acts as a "wizard". It just needs the buttons you have and an array of content panels, just have it switch through the panels when the buttons are pressed assuming a certain condition is met within the controls on the panel. There's no real definitive "wizard" maker, since it's pretty easy to roll your own wizard.
You don't need to do a "replacement" of your current form really, you could just add a new one to the project. If you do need to for whatever reason, just grab the control collection with Me.Controls, copy that somewhere, and put the new controls up. When you don't need the wizard, swap them out again. It's generally best practice to make a new form however!
All,
I have a TabControl in an application that started behaving strangely. Some background...
This program was converted from VB6 to VB .NET 2008, and used to refer to forms using their class names. In other words, I might have a form class called frmFoo. In the code for the program you might see:
frmFoo.Show()
or
frmFoo.UserDefinedProperty = True
During some recent changes, I created variables to represent instances of my forms much like these:
Public MyForm as frmFoo
MyForm = New frmFoo
MyForm.Show()
In doing so, I also removed code from the form's Load event handler and put it in the form's constructor.
When the form loads, or when a document is loaded and should influence the TabControl's selected index, something like the following will not necessarily fire the SelectedIndexChanged event.
MyForm.tbsForm.SelectedIndex = ValueReadFromFile
...or...
MyForm.tbsForm.Tabs(ValueReadFromFile).Select
Sorry to be so wordy, but there's more. If I open the form and look at the TabControl to verify that it's been set properly, everything works like it's supposed to. The misbehaving TabControl is contained within another TabControl, so I have to click the parent TabControl to see it. If I can see it, and run a test, the test always works. If I can't see it, and run a test, the first test I run will not fire the event. ...paging Dr. Heisenberg...
It's almost as if the control has to be initialized first by changing the value or making it visible onscreen...I'm totally lost on this one. It's the most unusual behavior I've ever seen. And everything worked perfectly before I began using variables to represent forms and placed the Load event code into the form constructors.
Can anyone help, or at least put me out of my misery?
SH
-------------------------------------------------------------- Edit #2
I just performed a test after having attempted to eliminate some of the variability in the behavior. But I wanted to confirm the previously-stated behavior.
I opened the program and read a file. This file contained a value that should have triggered the event handler. Without making the control visible, I can change the SelectedIndex property of the tab control without the event firing.
I closed the program down again, and reopened it. This time, selected the parent tab that allowed the child tab (the one whose event I'm concerned with) to become visible. I then selected a different tab in the parent control, meaning that the child control was no longer visible. When I opened the same file as before, it fired the event.
I'm tempted to implement a flag that confirms that the control has been repainted or whether the parent tab has been displayed. I may have to fire the event in code if the flag isn't set.
I want to reiterate that everything worked when the program referred to the forms by their class names and much of the arrangement of controls on the forms was done in the load event. Now the program creates variables and the arrangement of the controls is done in the form's constructor. I'm sure this has something to do with the problem I'm having, but I can't understand how. Any wisdom to share?
MyForm.tbsForm.SelectedIndexChanged = ValueReadFromFile
doesn't make a lot of sense. Is tha trying to assign a handler to the SelectedIndexChanged event? or is ValueReadFromFile the name of the tab?
What you're saying is that you have two tab controls, say, A and B. Tab control B is contained within a tab of A, and unless A has the tab page selected that contains the tab control B, the SelectedIndexChanged event of B will not fire if you change its tab programatically?
In which different ways have you tried to select a tab within the child tab control, and when is this code being executed?