No unprofiled JVM found - jprofiler

I have WebSphere 7 Aplication Server. There is Java VM 1.6 installed. Linux.
Java version "1.6.0"
Java(TM) SE Runtime Environment (build pxa6460sr10fp1-20120321_01(SR10 FP1))
IBM J9 VM (build 2.4, JRE 1.6.0 IBM J9 2.4 Linux amd64-64 jvmxa6460sr10fp1-20120202_101568 (JIT enabled, AOT enabled)
J9VM - 20120202_101568
JIT - r9_20111107_21307ifx1
GC - 20120202_AA)
JCL - 20120320_01
I try to use jProfiler, using trial lisence. But don't want to change something on the server this time.
So I download jprofiler for linux to my server.
Then I run bin/jpenable and it says that:
No unprofiled JVM found
Now I don't know what to do, googling doesn't give any useful result. Can You tell me in what way I must search a problem? May be incorrect path or something else. I hope You'll understand my english (it is not so good).

Have a look at this help pdf, in specifically check out Attach to local JVM session.
Also, have a look at this answer and this question.
hope it will help..

Related

Pharo 9.0 warning message on starting - "The current VM does not support TFFI Callbacks."

When I start a Pharo 9.0 x64 image with the Pharo 2.2 Launcher on Ubuntu 20.10, I get the following warning:
The current VM does not support TFFI Callbacks. It will use the old implementation.
I assume this is a reference to threaded FFI being added to the VM in the near future. Is there a way to use a newer VM that supports TFFI?
The only other post I could find on the internet relating to this warning is this one.
Thank you so much for reading this!
Yes, to get the newest VM you can go to "edit configurations" and then check to use the headless vm:

IntelliJ IDEA seems to not fully switch to the new jdk

I am stuck with the following problem regarding Intellij IDEA.
I had installed the following java version:
java version "1.7.0_51"
Java(TM) SE Runtime Environment (build 1.7.0_51-b13)
Java HotSpot(TM) Client VM (build 24.51-b03, mixed mode, sharing)
on my Win7 PC and using Intellij IDEA v14.1.3.
After some time, I have upgraded my jdk and now I have installed the following:
java version "1.7.0_71"
Java(TM) SE Runtime Environment (build 1.7.0_71-b14)
Java HotSpot(TM) Client VM (build 24.71-b01, mixed mode, sharing)
I have consequently changed all the references to point to the new jdk in system variables and in Intellij in Project structure ...
Everything seemed to work fine (when I run a program from Intellij I see that the command java is invoked from the right path).
The problem is that for some reasons, when I open the integrated terminal in Intellij and write java -version the result is the old version (1.7.0_51).
I realized this because of some issues of the old version of java I face when I run my unit tests that should have been resolved in the new version.
Have anybody any idea how to solve this?
Thank you in advance!
I would not only update the java version, but completely delete it from the machine. Obviously, you have not removed all the references to the old java, as your problem statements describes.
Maybe the Java Uninstall tool might be helpful for this? Then make a clean new installation.

Error while running Jprofile8

I am getting following error while running /tmp/jprofiler8/bin/jpenable
No suitable Java Virtual Machine could be found on your system.
The version of the JVM must be at least 1.6 and at most 1.7.
Please define INSTALL4J_JAVA_HOME to point to a suitable JVM.
You can also try to delete the JVM cache file
I have also set INSTALL4J_JAVA_HOME to point to suitable JVM.
Java version on my machine is 1.4.2.
Can anyone please suggest what might be wrong or missing?
Unfortunately you did not mention details about your environment, so I don't know which Linux distribution you use.
There are some options though:
install a current JRE alongside the installer for JProfiler
As you can't install or update Java, you could provide a JRE in a kind of "portable application" setup. Simply unzip the server jre Oracle provides or (if you are not on an x64 architecture) unzip the jdk you also can download from Oracle.
But if the code you want to profile is limited to your pre-installed Java 1.4 you will run into another problem, because as far as I know Java 1.5 is the minimum JProfiler expects
use a different machine for profiling
Unless your code depends heavily on the environment you run it in you can even take a Windows 8.1 machine and profile the code there. Code that is slow is slow on any operating system. Or make use of a different Linux computer.

Android Build Error: Unable to locate Java VM. Please set JAVA_HOME environment variable

I'm using Ti Studio on Win7, and my project builds and works when I have my Android plugged in via USB and I run using "Android Device".
However, when I try to buid it for distribution I get:
[ERROR] Program launch failed. Unable to locate Java VM. Please set JAVA_HOME environment variable.
I have looked at this thread which describes a similar problem, and verified that JAVA_HOME is set:
+>echo %JAVA_HOME%
C:\Program Files\Java\jdk1.6.0_29
Also, in Ti Studio I have verified that Preferences->Studio->Platforms->Android has the "Android SDK Home" set to the path where Android SDK is installed.
Can anyone guide me on what else I need to do to fix this?
Thanks!
UPDATE FOR ANAND
+>javac -version
javac 1.6.0_29
+>java -version
java version "1.7.0_01"
Java(TM) SE Runtime Environment (build 1.7.0_01-b08)
Java HotSpot(TM) 64-Bit Server VM (build 21.1-b02, mixed mode)
Did you read System Requirements?
From Documentation:
For Windows, the 32-bit version of Java JDK is required regardless of
whether Titanium is running on a 32-bit or 64-bit system.
Try to install additional 32bit version of Java (without removing the 64bit) and set the system variable.
You may refer this answer.
Hope it helped you
Configure environment variables as mentioned here and JDK must be 32 bit

How do i configure WebLogic 8.1 to use a specific JRE / JDK on my development machiine

How do i configure WebLogic 8.1 to use a specific JRE / JDK on my development machine. I realized that it is using hot spot and i would like to change it to run on JRockit.
You need to change the JAVA_VENDOR setting in the setDomainEnv.sh/.cmd file (depending whether you are running a Linux or Windows box).
Adding/changing the following lines to the start of your setDomainEnv file should work:
set JAVA_VENDOR=BEA
set BEA_JAVA_HOME=(path to your jrockit installation, e.g. c:\BEA\jrockit)
Now you should start the server. You can monitor, in the console (stdout), the indication about which Java version is being used:
starting weblogic with Java version:
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
BEA JRockit(R) (build R27.6.0-50_o-100423-1.6.0_05-20080626-2105-windows-ia32, compiled mode)
It is also possible to do it during the configuration wizard, when you are adding a domain, under the Java SDK Selections tab.