I have Successfully installed glassfish-1.0.3-universal-java, but when I run Rails Server using the command Jruby -S rails server glassfish. The output is follows:
f:\Program Files\BitNami JRubyStack\jruby\depot>Jruby -S rails s glassfish
Exiting
LoadError: no such file to load -- rack/handler/glassfish
require at org/jruby/RubyKernel.java:1033
try_require at F:/Program Files/BitNami JRubyStack/jruby/lib/ruby/gems/1.8/gem
s/rack-1.4.1/lib/rack/handler.rb:63
......
Any questions? Should I run Tomcat or Glassfish first?
You don't need to run rails server anymore, you just run glassfish.
f:\Program Files\BitNami JRubyStack\jruby\depot>glassfish
That will start up glassfish for your depot project. Check out their documentation for a little more information about this. That being said I think the glassfish project is kind of dying. From what I understand Oracle has killed glassfish (http://www.infoq.com/news/2010/04/glassfish-gem-alternatives-jruby). I would take a look at using Trinidad or Torquebox as alternatives.
Related
I have created a new custom cartridge, in which I have packaged into an rpm using tito and installed using yum. This cartridge is being copied from my spec file to the /usr/libexec/openshift/cartridges directory, however, when I log into the origin home site and try to create an application my cartridge does not show up. I went digging in the ruby scripts and I found that there is a script named cartridge_cache.rb seems to be caching the cartridges it finds within the /usr/libexec/openshift/cartridges directory. I have tried to get origin to reload the cache to include my new cartridge by removing all the cache files within the /var/www/openshift/broker/cache directory then restarting the broker, but I have had no success. Is there somewhere I need to hardcode my cart name to some global variable or something ? Basically, Does anyone know how to get your custom cart to show up on the webpage for creating a new application.
UPDATE: So I ran into a slide deck that had one slide on how to install the cartridge. However, I still have had no success, but here is what I have tried since the previous post:
moved my cartridge directory from /usr/libexec/openshift/cartridges to /usr/libexec/openshift/catridges/v2
ran this command
oo-admin-cartridge -a install -s /usr/libexec/openshift/cartridges/v2/myfirstcart
which the output stated it installed the cartridge.
cleared cache with
bundle exec rake tmp:clear
restarted the openshift broker service
Also, just to make sure the cache was cleared out I went into the Rails console and ran Rails.cache.clear. And still no custom cartridge on the openshift webpage.
It works for me after cleaning cache
cd /var/www/openshift/broker
bundle exec rake tmp:clear
and restarting broker service
service openshift-broker restart
http://openshift.github.io/documentation/oo_administration_guide.html#clear-the-broker-application-cache
MCollective service on Node server (if you have separate servers for broker and node) must be restarted. e.g. with
service ruby193-mcollective restart
After that you should clear the caches on broker server e.g with
/usr/sbin/oo-admin-broker-cache --console
Then you should have new cartridges available
I'm having a problem running the oink gem on my app in Heroku. I've included it in my gemfile and gemfile.lock, uploaded those, and it installs. It even creates the oink.log (which I have no way of viewing, unfortunately). When I run
heroku run bundle exec oink --threshold=0 log/* --app my_app
I get
Running bundle exec oink --threshold=0
log/delayed_job.log log/development.log log/oink.log log/production.log log/test.log attached to terminal... up, run.3
/app/.bundle/gems/ruby/1.8/gems/oink-0.9.3/bin/../lib/oink/cli.rb:88:in get_file_listing':
Could not find "log/delayed_job.log" (RuntimeError)
from /app/.bundle/gems/ruby/1.8/gems/oink-0.9.3/bin/../lib/oink/cli.rb:86:ineach'
from /app/.bundle/gems/ruby/1.8/gems/oink-0.9.3/bin/../lib/oink/cli.rb:86:in get_file_listing'
from /app/.bundle/gems/ruby/1.8/gems/oink-0.9.3/bin/../lib/oink/cli.rb:59:inprocess'
from /app/.bundle/gems/ruby/1.8/gems/oink-0.9.3/bin/oink:4
from /app/.bundle/gems/ruby/1.8/bin/oink:19:in 'load'
from /app/.bundle/gems/ruby/1.8/bin/oink:19
I've tried running each of the individual files, too, and get the same result. This command runs fine on my local machine.
In my production.rb file, I have
config.logger = Hodel3000CompliantLogger.new(config.paths.log.first)
config.middleware.use( Oink::Middleware )
as configuration.
Can you enlighten me on what I'm doing wrong here? My understanding is that the logs are read only, but I don't know if that means they're only accessible through the heroku logs command. If there's a way I can see the oink.log file, too--knowing how to do that is also appreciated, or knowing how to see it in the actual Heroku log using heroku logs.
UPDATE: The configuration for oink shown above allows the commands to be run successfully on my localhost.
Thanks!
-Andrew
Using capistrano 2.12.0, capistrano-ext 1.2.1, Rails 3.2.7 and Phusion Passenger 3.0.15.
For no logical reason, my 'playground' server has started reporting that it's actually running in development mode.
I've reinstalled things, restarted apache etc but am still stuck.
Don't really want to hardcode as I've got a production environment to think about.
In my apache conf. I've set
RailsEnv playground
There's a gist of my deploy.rb file here
Capistrano is sending to the correct location etc. so I think it's rails or passenger rather than cap.
What else can I do to get this going properly??
---- EDIT ----
I've just tested with Unicorn and it's also reporting that it's running in development mode.
Starting unicorn with the following:
unicorn -E playground -l 8000
After much experimentation, I found the root cause to be a line in one of my models:
- if Rails.env = 'development'
Obviously, this should have been a '==' not a single one.
I am working my way through the RhoMobile tutorial http://docs.rhomobile.com/rhoconnect/command-line#generate-an-application and I at the point of entering
rake redis:install
I get the following error.
WARNING: using the built-in Timeout class which is known to have issues when use
d for opening connections. Install the SystemTimer gem if you want to make sure
the Redis client will not hang.
See http://redis.io/ for information about redis.
Installing redis to C:\RhoStudio\redis-2.4.0;C:\dropbox\code\InstantRhodes\redis
-1.2.6-windows.
rake aborted!
Zip end of central directory signature not found
Tasks: TOP => redis:install => redis:download
(See full trace by running task with --trace)
D:\Dropbox\code\rhodes-apps\storeserver>
I am working on a Whindows machine, primarily using RhoStudio.
It ended up being an environmental variables issue. Also, it seems the main support forum for Rhodes is the Google Group. Question answered here:
https://groups.google.com/d/topic/rhomobile/b-Adx2FDMT8/discussion
If you are using Rhostudio in windows then redis is automatically installed with Rhostudio.
So no need of installing it again.
I am using delayed_job gem for sending emails in my rails app.
delayed_job was working well but from last 5 days, it is not working and throwing following error in delayed_job.log file.
2011-10-09T01:53:04+0530: [Worker(delayed_job host:backupserver pid:23953)] Syck::DomainType#private_group_join_request failed with NoMethodError: undefined method private_group_join_request' for # - 11 failed attempts
2011-10-09T01:53:04+0530: [Worker(delayed_job host:backupserver pid:23953)] 1 jobs processed at 1.4503 j/s, 1 failed ...
2011-10-09T01:54:40+0530: [Worker(delayed_job host:backupserver pid:23953)] Syck::DomainType#contact_us_email failed with NoMethodError: undefined method contact_us_email for # - 11 failed attempts
2011-10-09T01:54:40+0530: [Worker(delayed_job host:backupserver pid:23953)] 1 jobs processed at 4.3384 j/s, 1 failed ...
Following is one of the example how I am calling delayed job for sending email.
UserMailer.delay(:run_at => 10.seconds.from_now).contact_us_email(self)
I am starting delayed job with
RAILS_ENV=production script/delayed_job start
It is working correctly in development as well as production environment on my local machine.
Environment Which I am using in Rails App.
Rails 3.0.8
Ruby 1.9.2 in Linux(Ubuntu)
rake 0.9.2
delayed_job 2.1.4
This is same as
Undefined Method Error when creating delayed_job workers with script/delay_job
But solution is not working for me.
I figured it out. It was due to package "libyaml" package, which was not present on my local system but was installed on server.
Is it possible that you didn't stop and start your delayed_job worker when you deployed some new code? If a worker that was running before the deploy is trying to run new methods, it will fail.
Is it possible that YAML (or Syck) running in the worker process doesn't know about the method in question? Take a look at:
https://github.com/collectiveidea/delayed_job/wiki/Common-problems#wiki-jobs_are_silently_removed_from_the_database
... the relevant part is:
One common cause of deserialization errors is that the YAML references
a class not known to the worker. If this is the case, you can add
# file: config/initializers/custom.rb
require 'my_custom_class'
which will force my_custom_class to be loaded when the worker starts.
I had to restart my unicorns on the production server, by hand because for some reason cap deploy was not doing it for me.
So what I had to do was:
sudo /etc/init.d/unicorn_myapp stop
sudo /etc/init.d/unicorn_myapp start
But unicorn wasn't able to start, so I had to
sudo rm /tmp/unicorn.my_app.sock
And
sudo /etc/init.d/unicorn_myapp start