I have UIScrollView, with an UIImageView on top. I have a couple things I am trying to fix:
1) Initially, the image is scaled to fit in the screen (this is good). How do I set a boundary so that you can not zoom out past this point (I don't want to see any of the background)?
I looked around for some sort of maxSize property but couldn't find anything.
2) How do I set the amount that someone can zoom in? I don't want users to be able to x8 or anything like that.
1 )
[scrollview setMinimumZoomScale : float];
2 )
[scrollview setMaximumZoomScale : float];
Related
I am rather experiences libgdx developer but I struggle with one issue for some time so I decided to ask here.
I use FillViewport, TiledMap, Scene2d and OrtographicCamera. I want the camera to follow my player instance but there are bounds defined (equal to mapsize). It means that camera will never ever leave outside of map, so when player comes to an end of the map camera stops following and he goes to the edge of the screen itself. Maybe sounds complicated but it's simple and I am sure that you know what I mean, it's used in every game.
I calculated 4 values:
minCameraX = camera.viewportWidth / 2;
minCameraY = camera.viewportHeight / 2;
maxCameraX = mapSize.x camera.viewportWidth / 2;
maxCameraY = mapSize.y - camera.viewportHeight / 2;
I removed not necessary stuff like unit conversion, camera.zoom etc. Then I set the camera position like this:
camera.position.set(Math.min(maxCameraX, Math.max(posX, minCameraX)), Math.min(maxCameraY, Math.max(posY, minCameraY)), 0);
(posX, posY is player position) which is basically setting camera to player position but if it's to high or too low it sets it to max or min defined before in right axis. (I also tries MathUtils.clamp() and it works the same.
Everything is perfect until now. Problem occures when aspect ratio changes. By default I use 1280x768 but my phone has 1280x720. Because of that bottom and top edges of the screen are cut off because of the way how FillViewport works. Because of that part of my map is cut off.
I tried to modify maximums and minimums, calculate differences in ratio and adding them to calculations, changing camera size, different viewports and some other stuff but without success.
Can you guys help?
Thanks
I tried solution of noone and Tenfour04 from comments above. Both are not perfect but I am satisified enough i guess:
noone:
camera.position.x = MathUtils.clamp(camera.position.x, screenWidth/2 + leftGutter, UnitConverter.toBox2dUnits(mapSize.x) - screenWidth/2 + rightGutter);
camera.position.y = MathUtils.clamp(camera.position.y, screenHeight/2 + bottomGutter, UnitConverter.toBox2dUnits(mapSize.y) - screenHeight/2 - topGutter);
It worked however only for small spectrum of resolutions. For strange resolutions where aspect ratio is much different than default one I've seen white stripes after border. It means that whole border was printer and some part of the world outside of border. I don't know why
Tenfour04:
I changed viewport to ExtendViewport. Nothing is cut off but in different aspect ratios I also can see world outside of borders.
Solution for both is to clear screen with same color as the border is and background of level separatly which gave satisfying effect in both cases.
It stil has some limitations. As border is part of the world (tiled blocks) it's ok when it has same color. In case border has different colors, rendering one color outside of borders won't be a solution.
Thanks noone and Tenfour04 and I am still opened for suggestions:)
Here are some screenshots:
https://www.dropbox.com/sh/00h947wkzo73zxa/AAADHehAF4WI8aJ8bu4YzB9Va?dl=0
Why don't you use FitViewport instead of FullViewport? That way it won't cut off your screen, right?
It is a little bit late, but I have a solution for you without compromises!
Here width and height are world size in pixels. I use this code with FillViewport and everything works excellent!
float playerX = player.getBody().getPosition().x*PPM;
float playerY = player.getBody().getPosition().y*PPM;
float visibleW = viewport.getWorldWidth()/2 + (float)viewport.getScreenX()/(float)viewport.getScreenWidth()*viewport.getWorldWidth();//half of world visible
float visibleH = viewport.getWorldHeight()/2 + (float)viewport.getScreenY()/(float)viewport.getScreenHeight()*viewport.getWorldHeight();
float cameraPosx=0;
float cameraPosy=0;
if(playerX<visibleW){
cameraPosx = visibleW;
}
else if(playerX>width-visibleW){
cameraPosx = width-visibleW;
}
else{
cameraPosx = playerX;
}
if(playerY<visibleH){
cameraPosy = visibleH;
}
else if(playerY>height-visibleH){
cameraPosy = height-visibleH;
}
else{
cameraPosy = playerY;
}
camera.position.set(cameraPosx,cameraPosy,0);
camera.update();
I’m trying to put together what seems to be a simple case of two NSTextFields with dynamic width and fixed spacing in between. I cannot figure out an effective way to do so though.
I’m looking to get something like this:
The blue boxes are the NSTextFields. When more text is entered into one, it should grow and thus make the other one shrink, maintaining the lead space, trailing space and the spacing in between the fields. The first one should take the priority if both of the fields have too much text. Each field will also clearly have a maximum and a minimum possible width it can reach.
How would I go around handling this, preferably utilising IB autolayout as much as possible?
It seems to me that all of constraints you mentioned directly translate into interface builder --
First view has width >= something.
First view has width <= something
Same for Second view.
Space between views is fixed.
Second view wants to be as small as possible (have its width at 0) but this has lower lower priority than the previous constraints and lower priority than inner content size constraints.
The code I had to add to my view controller, after applying the constraints as per the ilya’s answer:
In controlTextDidChange (_controlWidthConstraint refers to the fixed width constraint of the input; it’s probably 0 by default for the second input):
// Get the new width that fits
float oldWidth = textControl.frame.size.width;
[input sizeToFit];
float controlWidth = textControl.frame.size.width;
// Don’t let the sizeToFit method modify the frame though
NSRect controlRect = textControl.frame;
controlRect.size.width = oldWidth;
textControl.frame = controlRect;
_controlWidthConstraint.constant = controlWidth;
The key lies in invalidating the intrinsicContentSize for the text field when text is input.
You can check a sample project here, to get you on the right track.
OK, so here's the deal :
I'm having a vertical NSSplitView (actually using DMSplitView sublass) with 2 subviews in it
I want the bottom one to be of fixed height
DMSplitView manages to "fix" its size under certain conditions (e.g. when the window is resized the bottom view stays as is)
However, if the user tries to drag-resize the view (although both min/max constraints have been set) he's able to, which means that the bottom view is not of fixed height after all.
And this all of my (related) code :
[_mainHorizontalSplitView setMinSize:25 ofSubviewAtIndex:1];
[_mainHorizontalSplitView setMaxSize:25 ofSubviewAtIndex:1];
So, any ideas of a possible workaround for this?
Just found it (actually a modification to DMSplitView delegate) :
- (CGFloat)splitView:(NSSplitView *)splitView
constrainSplitPosition:(CGFloat)proposedPosition
ofSubviewAt:(NSInteger)dividerIndex
{
return [self positionOfDividerAtIndex:dividerIndex];
}
I have designed my help page for my application,it contains some FAQs..so I have used UILabels for question and answer,I have adjusted,x,y,width and height exactly in the xib,leaving a gap between a question and answer and answer and next question.so totally I have some 10 question and answers,I have put them inside a scroll view.
But now, suppose the text changes dynamically, how can I adjust the positions and width and height,is a problem which I am not able to figure out, by using the below code,it adjusts the height and width of a particular label,if the text increases
NSString * test=#" It may come as a rude shock, but Facebook users should not feel surprised if tomorrow they come across their photos existing in the web world despite having deleted them personally long ago.";
m_testLabel.text = test;
m_testLabel.numberOfLines = 0; //will wrap text in new line
[m_testLabel sizeToFit];
but then, my next label will clash with it..is their any way so that all the labels get adjusted according if the width of any label increases or decreases?
Hope you all have understood my question..
Did you look into the below function, pass the font you have used and the size to which u want to constraint the label into.
- (CGSize)sizeWithFont:(UIFont *)font constrainedToSize:(CGSize)size
I have this code to change the stroke width of the line i'm using to draw on the screen.
- (IBAction)changeSize:(id)sender
{
if (Slider.value > 25.0)
{
Width += 3;
}
}
It's working but when i drag the slider thumb straight to the maximum it just adds a little size only but when i do it partly it's getting bigger each step.
Also, when i decrease it on the UISlider it still adds more... it's not decreasing...
How can i do resizing using UISlider??
It looks like you are telling it to increase the width by 3 when the slider is changed.
You would need to set the width equal to the slider value.
Well, you need to understand how sliders work. The Slider.value is your current slider value and it goes from Slider.minimumValue to Slider.maximumValue, witch you can set when creating the slider. You should set those to your minimum line stroke and to maximum line stroke.
In your changeSize method you should then only have 1 line: Width = Slider.value; What you are doing now, is that each time you move the slider and its value is larger then 25.0, you increase the stroke by 3.
As for the speed of slider movement effecting the stroke in your case: How many times the method changeSize will be called is time based, not value. So if you slide it faster, it will be called lesser times then if you slide it slowly, therefor increasing your Width lesser times by 3.