Newbie here, just trying to create a signal event handler in response to an onclick menu item.
Aint working for me.
I click on the menu item, click signals, to the right of "Activated" where it says "Click to Add Handler", I type in "MyOnClick"
then it shoots me out an error. weird.
Exception has been thrown by the target of an invocation.
I am running this in windows 7 under a vm on macbook pro. Windows is not sharing folders from Macbook Pro so shouldn't be a UNC issue. Pathways seem fine.
Any ideas?
Ben
I have the same issue on mac and windows with current monodevelop versions.
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.NotImplementedException: The method or operation is not implemented.
It's annoying me so much! Must be some bug.
EDIT: I've solve it!
In source add method like this:
protected virtual void onClick (object sender, EventArgs e)
{
MessageDialog md = new MessageDialog (this, DialogFlags.Modal,
MessageType.Error, ButtonsType.Close, "Some error");
md.Response += delegate(object o, ResponseArgs args) {
if (args.ResponseId == ResponseType.Close)
Console.WriteLine ("Response: Closed");
else
Console.WriteLine ("Other response happened.");
};
md.Run ();
md.Destroy ();
}
Then switch to visual designer and instead double click on signal/method name just type in method name [this case] onClick (no brackets). This time a method is implemented and doesn't cause throwing error.
It work but is not as comfortable as double click.
Related
When I create a new project, I get a strange behavior for unhandled exceptions. This is how I can reproduce the problem:
1) create a new Windows Forms Application (C#, .NET Framework 4, VS2010)
2) add the following code to the Form1_Load handler:
int vara = 5, varb = 0;
int varc = vara / varb;
int vard = 7;
I would expect that VS breaks and shows an unhandled exception message at the second line. However, what happens is that the third line is just skipped without any message and the application keeps running.
I don't have this problem with my existing C# projects. So I guess that my new projects are created with some strange default settings.
Does anyone have an idea what's wrong with my project???
I tried checking the boxes in Debug->Exceptions. But then executions breaks even if I handle the exception in a try-catch block; which is also not what I want. If I remember correctly, there was a column called "unhandled exceptions" or something like this in this dialog box, which would do excatly what I want. But in my projects there is only one column ("Thrown").
This is a nasty problem induced by the wow64 emulation layer that allows 32-bit code to run on the 64-bit version of Windows 7. It swallows exceptions in the code that runs in response to a notification generated by the 64-bit window manager, like the Load event. Preventing the debugger from seeing it and stepping in. This problem is hard to fix, the Windows and DevDiv groups at Microsoft are pointing fingers back and forth. DevDiv can't do anything about it, Windows thinks it is the correct and documented behavior, mysterious as that sounds.
It is certainly documented but just about nobody understands the consequences or thinks it is reasonable behavior. Especially not when the window procedure is hidden from view of course, like it is in any project that uses wrapper classes to hide the window plumbing. Like any Winforms, WPF or MFC app. Underlying issue is Microsoft could not figure out how to flow exceptions from 32-bit code back to the 64-bit code that triggered the notification back to 32-bit code that tries to handle or debug the exception.
It is only a problem with a debugger attached, your code will bomb as usual without one.
Project > Properties > Build tab > Platform target = AnyCPU and untick Prefer 32-bit. Your app will now run as a 64-bit process, eliminating the wow64 failure mode. Some consequences, it disables Edit + Continue for VS versions prior to VS2013 and might not always be possible when you have a dependency on 32-bit code.
Other possible workarounds:
Debug > Exceptions > tick the Thrown box for CLR exceptions to force the debugger to stop at the line of code that throws the exception.
Write try/catch in the Load event handler and failfast in the catch block.
Use Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException) in the Main() method so that the exception trap in the message loop isn't disabled in debug mode. This however makes all unhandled exceptions hard to debug, the ThreadException event is pretty useless.
Consider if your code really belongs in the Load event handler. It is very rare to need it, it is however very popular in VB.NET and a swan song because it is the default event and a double-click trivially adds the event handler. You only ever really need Load when you are interested in the actual window size after user preferences and autoscaling is applied. Everything else belongs in the constructor.
Update to Windows 8 or later, they have this wow64 problem solved.
In my experience, I only see this issue when I'm running with a debugger attached. The application behaves the same when run standalone: the exception is not swallowed.
With the introduction of KB976038, you can make this work as you'd expect again. I never installed the hotfix, so I'm assuming it came as part of Win7 SP1.
This was mentioned in this post:
The case of the disappearing OnLoad exception – user-mode callback exceptions in x64
Here's some code that will enable the hotfix:
public static class Kernel32
{
public const uint PROCESS_CALLBACK_FILTER_ENABLED = 0x1;
[DllImport("Kernel32.dll")]
public static extern bool SetProcessUserModeExceptionPolicy(UInt32 dwFlags);
[DllImport("Kernel32.dll")]
public static extern bool GetProcessUserModeExceptionPolicy(out UInt32 lpFlags);
public static void DisableUMCallbackFilter() {
uint flags;
GetProcessUserModeExceptionPolicy(out flags);
flags &= ~PROCESS_CALLBACK_FILTER_ENABLED;
SetProcessUserModeExceptionPolicy(flags);
}
}
Call it at the beginning of your application:
[STAThread]
static void Main()
{
Kernel32.DisableUMCallbackFilter();
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
Application.Run(new Form1());
}
I've confirmed (with the the simple example shown below) that this works, just as you'd expect.
protected override void OnLoad(EventArgs e) {
throw new Exception("BOOM"); // This will now get caught.
}
So, what I don't understand, is why it was previously impossible for the debugger to handle crossing kernel-mode stack frames, but with this hotfix, they somehow figured it out.
As Hans mentions, compile the application and run the exe without a debugger attached.
For me the problem was changing a Class property name that a BindingSource control was bound to. Running without the IDE I was able to see the error:
Cannot bind to the property or column SendWithoutProofReading on the
DataSource. Parameter name: dataMember
Fixing the BindingSource control to bind to the updated property name resolved the problem:
I'm using WPF and ran into this same problem. I had tried Hans 1-3 suggestions already, but didn't like them because studio wouldn't stop at where the error was (so I couldn't view my variables and see what was the problem).
So I tried Hans' 4th suggestion. I was suprised at how much of my code could be moved to the MainWindow constructor without any issue. Not sure why I got in the habit of putting so much logic in the Load event, but apparently much of it can be done in the ctor.
However, this had the same problem as 1-3. Errors that occur during the ctor for WPF get wrapped into a generic Xaml exception. (an inner exception has the real error, but again I wanted studio to just break at the actual trouble spot).
What ended up working for me was to create a thread, sleep 50ms, dispatch back to main thread and do what I need...
void Window_Loaded(object sender, RoutedEventArgs e)
{
new Thread(() =>
{
Thread.Sleep(50);
CrossThread(() => { OnWindowLoaded(); });
}).Start();
}
void CrossThread(Action a)
{
this.Dispatcher.BeginInvoke(a);
}
void OnWindowLoaded()
{
...do my thing...
This way studio would break right where an uncaught exception occurs.
A simple work-around could be if you can move your init code to another event like as Form_Shown which called later than Form_Load, and use a flag to run startup code at first form shown:
bool firstLoad = true; //flag to detect first form_shown
private void Form1_Load(object sender, EventArgs e)
{
//firstLoad = true;
//dowork(); //not execute initialization code here (postpone it to form_shown)
}
private void Form1_Shown(object sender, EventArgs e)
{
if (firstLoad) //simulate Form-Load
{
firstLoad = false;
dowork();
}
}
void dowork()
{
var f = File.OpenRead(#"D:\NoSuchFile756.123"); //this cause an exception!
}
When I create a new project, I get a strange behavior for unhandled exceptions. This is how I can reproduce the problem:
1) create a new Windows Forms Application (C#, .NET Framework 4, VS2010)
2) add the following code to the Form1_Load handler:
int vara = 5, varb = 0;
int varc = vara / varb;
int vard = 7;
I would expect that VS breaks and shows an unhandled exception message at the second line. However, what happens is that the third line is just skipped without any message and the application keeps running.
I don't have this problem with my existing C# projects. So I guess that my new projects are created with some strange default settings.
Does anyone have an idea what's wrong with my project???
I tried checking the boxes in Debug->Exceptions. But then executions breaks even if I handle the exception in a try-catch block; which is also not what I want. If I remember correctly, there was a column called "unhandled exceptions" or something like this in this dialog box, which would do excatly what I want. But in my projects there is only one column ("Thrown").
This is a nasty problem induced by the wow64 emulation layer that allows 32-bit code to run on the 64-bit version of Windows 7. It swallows exceptions in the code that runs in response to a notification generated by the 64-bit window manager, like the Load event. Preventing the debugger from seeing it and stepping in. This problem is hard to fix, the Windows and DevDiv groups at Microsoft are pointing fingers back and forth. DevDiv can't do anything about it, Windows thinks it is the correct and documented behavior, mysterious as that sounds.
It is certainly documented but just about nobody understands the consequences or thinks it is reasonable behavior. Especially not when the window procedure is hidden from view of course, like it is in any project that uses wrapper classes to hide the window plumbing. Like any Winforms, WPF or MFC app. Underlying issue is Microsoft could not figure out how to flow exceptions from 32-bit code back to the 64-bit code that triggered the notification back to 32-bit code that tries to handle or debug the exception.
It is only a problem with a debugger attached, your code will bomb as usual without one.
Project > Properties > Build tab > Platform target = AnyCPU and untick Prefer 32-bit. Your app will now run as a 64-bit process, eliminating the wow64 failure mode. Some consequences, it disables Edit + Continue for VS versions prior to VS2013 and might not always be possible when you have a dependency on 32-bit code.
Other possible workarounds:
Debug > Exceptions > tick the Thrown box for CLR exceptions to force the debugger to stop at the line of code that throws the exception.
Write try/catch in the Load event handler and failfast in the catch block.
Use Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException) in the Main() method so that the exception trap in the message loop isn't disabled in debug mode. This however makes all unhandled exceptions hard to debug, the ThreadException event is pretty useless.
Consider if your code really belongs in the Load event handler. It is very rare to need it, it is however very popular in VB.NET and a swan song because it is the default event and a double-click trivially adds the event handler. You only ever really need Load when you are interested in the actual window size after user preferences and autoscaling is applied. Everything else belongs in the constructor.
Update to Windows 8 or later, they have this wow64 problem solved.
In my experience, I only see this issue when I'm running with a debugger attached. The application behaves the same when run standalone: the exception is not swallowed.
With the introduction of KB976038, you can make this work as you'd expect again. I never installed the hotfix, so I'm assuming it came as part of Win7 SP1.
This was mentioned in this post:
The case of the disappearing OnLoad exception – user-mode callback exceptions in x64
Here's some code that will enable the hotfix:
public static class Kernel32
{
public const uint PROCESS_CALLBACK_FILTER_ENABLED = 0x1;
[DllImport("Kernel32.dll")]
public static extern bool SetProcessUserModeExceptionPolicy(UInt32 dwFlags);
[DllImport("Kernel32.dll")]
public static extern bool GetProcessUserModeExceptionPolicy(out UInt32 lpFlags);
public static void DisableUMCallbackFilter() {
uint flags;
GetProcessUserModeExceptionPolicy(out flags);
flags &= ~PROCESS_CALLBACK_FILTER_ENABLED;
SetProcessUserModeExceptionPolicy(flags);
}
}
Call it at the beginning of your application:
[STAThread]
static void Main()
{
Kernel32.DisableUMCallbackFilter();
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
Application.Run(new Form1());
}
I've confirmed (with the the simple example shown below) that this works, just as you'd expect.
protected override void OnLoad(EventArgs e) {
throw new Exception("BOOM"); // This will now get caught.
}
So, what I don't understand, is why it was previously impossible for the debugger to handle crossing kernel-mode stack frames, but with this hotfix, they somehow figured it out.
As Hans mentions, compile the application and run the exe without a debugger attached.
For me the problem was changing a Class property name that a BindingSource control was bound to. Running without the IDE I was able to see the error:
Cannot bind to the property or column SendWithoutProofReading on the
DataSource. Parameter name: dataMember
Fixing the BindingSource control to bind to the updated property name resolved the problem:
I'm using WPF and ran into this same problem. I had tried Hans 1-3 suggestions already, but didn't like them because studio wouldn't stop at where the error was (so I couldn't view my variables and see what was the problem).
So I tried Hans' 4th suggestion. I was suprised at how much of my code could be moved to the MainWindow constructor without any issue. Not sure why I got in the habit of putting so much logic in the Load event, but apparently much of it can be done in the ctor.
However, this had the same problem as 1-3. Errors that occur during the ctor for WPF get wrapped into a generic Xaml exception. (an inner exception has the real error, but again I wanted studio to just break at the actual trouble spot).
What ended up working for me was to create a thread, sleep 50ms, dispatch back to main thread and do what I need...
void Window_Loaded(object sender, RoutedEventArgs e)
{
new Thread(() =>
{
Thread.Sleep(50);
CrossThread(() => { OnWindowLoaded(); });
}).Start();
}
void CrossThread(Action a)
{
this.Dispatcher.BeginInvoke(a);
}
void OnWindowLoaded()
{
...do my thing...
This way studio would break right where an uncaught exception occurs.
A simple work-around could be if you can move your init code to another event like as Form_Shown which called later than Form_Load, and use a flag to run startup code at first form shown:
bool firstLoad = true; //flag to detect first form_shown
private void Form1_Load(object sender, EventArgs e)
{
//firstLoad = true;
//dowork(); //not execute initialization code here (postpone it to form_shown)
}
private void Form1_Shown(object sender, EventArgs e)
{
if (firstLoad) //simulate Form-Load
{
firstLoad = false;
dowork();
}
}
void dowork()
{
var f = File.OpenRead(#"D:\NoSuchFile756.123"); //this cause an exception!
}
I am developing a simple WP8 application using VS 2013. I have a MainPage.xaml and added a new page called Page1.xaml. I have a list of options on screen when a user clicks on "new item" I want to open a new page to add new item (Page1.xaml for instance).
On the list selection changed event I have written the following code:
private void OptionssList_SelectionChanged(object sender, SelectionChangedEventArgs e)
{
var selection = (MenuItem) e.AddedItems[0];
switch (selection.Id)
{
case 0:
break;
case 1:
break;
case 2:
this.NavigationService.Navigate(new Uri("/Page1.xaml", UriKind.Relative));
break;
case 3:
break;
default:
break;
}
}
When I try to debug the application, I notice that the constructor of Page1.xaml is invoked if I had an OnNavigatedTo event handler it is also been invoked however after all this an Unhandled exception is thrown. There is no code that I can see when the exception is thrown however it invokes the Application_UnhandledException event handler.
private void Application_UnhandledException(object sender, ApplicationUnhandledExceptionEventArgs e)
{
if (Debugger.IsAttached)
{
// An unhandled exception has occurred; break into the debugger
Debugger.Break();
}
}
The exception details is as shown below:
System.NullReferenceException was unhandled
Message: An unhandled exception of type 'System.NullReferenceException' occurred in System.Windows.ni.dll
Additional information: Object reference not set to an instance of an object.
I would like to know if I am missing something. I referred to the sample it also shows similar way to Navigate, did not notice any things fancy.
i know this may be a very stupid question, your code looks fine to me, is your page not maybe in another folder? I always put my pages in a folder called UI, so my code will look something like this:
/folder1/folder2/pagename
this.NavigationService.Navigate(new Uri("/UI/Generics/Page.xaml", UriKind.Relative));
Just make sure of that, cause that usually get me.
I have a button and a tapped event:
private void btnSetLocationName_Click_1(object sender, RoutedEventArgs e)
{
ApplicationModel.LocationName = locationName.Text;
Frame.Navigate(typeof(GroupsPage));
}
I want to just navigate to another page. Unfortunately, Frame.Navigate does not work. I have also tried to make sure it runs in the GUI thread:
await this.Dispatcher.RunAsync(CoreDispatcherPriority.High, () => Frame.Navigate(typeof(GroupsPage)));
However, it should do, as the click handler for the button runs in the GUI thread.
The following error occurs:
Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
OK, after commenting out bits of code until it worked, it turns out I had an empty OnNavigatedTo override:
protected override void OnNavigatedTo(NavigationEventArgs e)
{
//base.OnNavigatedTo(e);
}
If you uncomment base.OnNavigatedTo it now works.
I think what threw me was that the error occurred when navigating FROM a page with this empty override. Also, the cryptic error message didn't help much.
After initiating a new project, I would like to know when Petrel has completed the new project creation. When subscribed to the DataManager.WorkspaceOpened event, the event get called when the workspace is opened, but this may not be when the main thread has completed creating the new project.
Any ideas on when to know when Petrel is finished creating the new project ?
Perhaps you can try to find another way to solve your underlying problem than listening for the project event? Could you do a lazy evaluation and wait until the user actually need your code to do what it will do after the project is loaded?
Sometimes you might end up chasing these kind of problems in a circle: I need A to happen after B, and B to happen after C, and C to happen after A.
Anyway... here is a hack that you can try in you IModule:
void WorkspaceOpened(object sender, EventArgs e)
{
Application.Idle += new EventHandler(Application_Idle);
}
void Application_Idle(object sender, EventArgs e)
{
// Deatach from this, since this event can be raised 100 times per second,
// and we only want it once per project.
Application.Idle -= new EventHandler(Application_Idle);
DoMyStuffHereAfterTheProjectHasFinishedOpening();
}