I have two tables
Table A
type_uid, allowed_type_uid
9,1
9,2
9,4
1,1
1,2
24,1
25,3
Table B
type_uid
1
2
From table A I need to return
9
1
Using a WHERE IN clause I can return
9
1
24
SELECT
TableA.type_uid
FROM
TableA
INNER JOIN
TableB
ON TableA.allowed_type_uid = TableB.type_uid
GROUP BY
TableA.type_uid
HAVING
COUNT(distinct TableB.type_uid) = (SELECT COUNT(distinct type_uid) FROM TableB)
Join the two tables togeter, so that you only have the records matching the types you are interested in.
Group the result set by TableA.type_uid.
Check that each group has the same number of allowed_type_uid values as exist in TableB.type_uid.
distinct is required only if there can be duplicate records in either table. If both tables are know to only have unique values, the distinct can be removed.
It should also be noted that as TableA grows in size, this type of query will quickly degrade in performance. This is because indexes are not actually much help here.
It can still be a useful structure, but not one where I'd recommend running the queries in real-time. Rather use it to create another persisted/cached result set, and use this only to refresh those results as/when needed.
Or a slightly cheaper version (resource wise):
SELECT
Data.type_uid
FROM
A AS Data
CROSS JOIN
B
LEFT JOIN
A
ON Data.type_uid = A.type_uid AND B.type_uid = A.allowed_type_uid
GROUP BY
Data.type_uid
HAVING
MIN(ISNULL(A.allowed_type_uid,-999)) != -999
Your explanation is not very clear. I think you want to get those type_uid's from table A where for all records in table B there is a matching A.Allowed_type_uid.
SELECT T2.type_uid
FROM (SELECT COUNT(*) as AllAllowedTypes FROM #B) as T1,
(SELECT #A.type_uid, COUNT(*) as AllowedTypes
FROM #A
INNER JOIN #B ON
#A.allowed_type_uid = #B.type_uid
GROUP BY #A.type_uid
) as T2
WHERE T1.AllAllowedTypes = T2.AllowedTypes
(Dems, you were faster than me :) )
Related
Hi i have two table A and B.A has 6 rows and b has 7 rows.Both tables have common value in name column.All the 6 rows of a table is present in b table on name column.
When i write query select * from a,b where a.name = b.name i get 14 rows returned i was expecting an inner join of with 6 rows in result.
Please explain me how query works when we have two tables in form clause.
Table A
Table B
query is
select * from a,b where a.tt = b.tt and a.nename=b.nename;
reuslt is
You've got duplicates in both tables (except for {2, 2017-03-04 03:00:00} which has three copies) which is why you get 14 = (2 * 4) + (2 * 3).
It's very hard to make sense of duplicate data. It's even harder to do when it duplicated on both sides of a join.
You could do something like
With fixedA (SELECT
*,
row_number() over (partition by nename, tt order by nename) rn
FROM
A),
fixedb (SELECT
*,
row_number() over (partition by nename, tt order by nename) rn
FROM
B)
SELECT *
FROM fixedA a full outer join fixedb b
on a.neName = b.neName
and a.tt = b.tt
and a.rn = b.rn
This will however leave one B record with a Null A record
The row_number also seems to do what cellID does so you could just do
SELECT *
FROM a full outer join b
on a.neName = b.neName
and a.tt = b.tt
and a.cellID = b.cellID
you should be doing something like full outer join on that table that you need result set from I would suggest something like this
select * from a full outer join b on a.tt = b.tt and a.nename=b.nename;
if your dealing with a bigger data set join on data type like varchar might take a lot of time to load the result set due to comparison. So, it would be better to use foreign key or primary key joins
https://www.w3schools.com/sql/sql_join_full.asp
I've been banging my head against the wall for something that I think should be simple but just cant get to work.
I'm trying to retrieve the row with the highest multi_flag value when I join table A and table B but I can't seem to get the SQL right because it returns all the rows rather than the one with the highest multi_flag value.
Here are my tables...
Table A
Table B
This is almost my desired result but only if I leave out the value_id row
SELECT CATALOG, VENDOR_CODE, INVLINK, NAME_ID, MAX(multi_flag) AS multiflag
FROM TBLINVENT_ATTRIBUTE AS A
INNER JOIN TBLATTRIBUTE_VALUE AS B
ON A.VALUE_ID = B.VALUE_ID
GROUP BY CATALOG, VENDOR_CODE, INVLINK, NAME_ID
ORDER BY CATALOG DESC
This is close to what I want to retreive but not quite notice how it returns unique name_id and the highest multi_flag but I also need the value_id that belongs to such multi_flag / name_id grouping...
If I include the value_id in my SQL statement then it returns all rows and is no longer grouped
Notic ein the results below how it no longer returns the row for the highest multi_flag and how all the different values for name_id (Ex. name_id 1) are also returned
You can choose to use a sub-query, derived table or CTE to solve this problem. Performance will be depending on the amount of data you are querying. To achieve your goal of getting the max multiflag you must first get the max value based on the grouping you want to achieve this you can use a CTE or sub query. The below CTE will give the max multi_flag by value that you can use to get the max multi_flag and then you can use that to join back to your other tables. I have three joins in this example but this can be reduce and as far a performance it may be better to use a subquery but you want know until you get the se the actual execution plans side by side.
;with highest_multi_flag as
(
select value_id, max(multi_flag) AS multiflag
FROM TBLINVENT_ATTRIBUTE
group by value_id
)
select A.CATALOG, a.VENDOR_CODE, a.INVLINK, b.NAME_ID,m.multiflag
from highest_multi_flag m
inner join TBLINVENT_ATTRIBUTE AS A on a.VALUE_ID =b. m.VALUE_ID
INNER JOIN TBLATTRIBUTE_VALUE AS B ON m.VALUE_ID = B.VALUE
You can use Lateral too, its an other solution
SELECT
A.CATALOG, A.VENDOR_CODE, A.INVLINK, B.NAME_ID, M.maxmultiflag
FROM TBLINVENT_ATTRIBUTE AS A
inner join lateral
(
select max(B.multi_flag) as maxmultiflag from TBLINVENT_ATTRIBUTE C
where A.VALUE_ID = C.VALUE_ID
) M on 1=1
INNER JOIN TBLATTRIBUTE_VALUE AS B ON M.maxmultiflag = B.VALUE
table a.
Table b . I have two tables. Table A has over 8000+ records and continues to grow with time.
Table B has only 5 or so records and grows rarely but does grow sometimes.
I want to query Table A's last records where the Id for Table A matches for Table B. The problem is; I am getting all the rows from Table A. I just need the ones where Table A and B match once. These are unique Id's when a new row is inserted into table B and never get repeated.
Any help is most appreciated.
SELECT a.nshift,
a.loeeworkcellid,
b.loeeconfigworkcellid,
b.loeescheduleid,
b.sdescription,
b.sshortname
FROM oeeworkcell a
INNER JOIN dbo.oeeconfigworkcell b
ON a.loeeconfigworkcellid = b.loeeconfigworkcellid
ORDER BY a.loeeworkcellid DESC
I am assuming you want to get the only the lastest (as you said) row from the TableA but JOIN giving you all the rows.You can use the Row_Number() to get the rownumber and then apply the join and filter it with the Where clause to select only the first row from the JOIN. So what you can try as below,
;WITH CTE
AS
(
SELECT * , ROW_NUMBER() OVER(PARTITION BY loeeconfigworkcellid ORDER BY loeeworkcellid desc) AS Rn
FROM oeeworkcell
)
SELECT a.nshift,
a.loeeworkcellid,
b.loeecoonfigworkcellid,
b.loeescheduleid,
b.sdescription,
b.sshortname
FROM CTE a
INNER JOIN dbo.oeeconfigworkcell b
ON a.loeeconfigworkcellid = b.loeeconfigworkcellid
WHERE
a.Rn = 1
You need to group by your data and select only the data having the condition with min id.
SELECT a.nshift,
a.loeeworkcellid,
b.loeecoonfigworkcellid,
b.loeescheduleid,
b.sdescription,
b.sshortname
FROM oeeworkcell a
INNER JOIN dbo.oeeconfigworkcell b
ON a.loeeconfigworkcellid = b.loeeconfigworkcellid
group by
a.nshift,
a.loeeworkcellid,
b.loeecoonfigworkcellid,
b.loeescheduleid,
b.sdescription,
b.sshortname
having a.loeeworkcellid = min(a.loeeworkcellid)
I have two tables that are structured the same with a sequence column and I am trying to count the number of sequences that show up in two different tables.
I am using this right now:
SELECT A.sequence FROM p2.pool A WHERE EXISTS (SELECT * from
p1.pool B WHERE B.sequence = A.sequence)
And then I was going to count the number of results.
Is there an easier way to do this using COUNT so I don't have to get all of the results first?
Yes, there is an easier way using COUNT:
SELECT COUNT(*)
FROM p2.pool A
WHERE EXISTS (SELECT *
FROM p1.pool B
WHERE B.sequence = A.sequence)
You could also use a join instead of a subquery, but the speed is unlikely to change:
SELECT COUNT(*)
FROM p2.pool A
JOIN p1.pool B ON A.sequence = B.sequence
I am trying to filter a single table (master) by the values in multiple other tables (filter1, filter2, filter3 ... filterN) using only joins.
I want the following rules to apply:
(A) If one or more rows exist in a filter table, then include only those rows from the master that match the values in the filter table.
(B) If no rows exist in a filter table, then ignore it and return all the rows from the master table.
(C) This solution should work for N filter tables in combination.
(D) Static SQL using JOIN syntax only, no Dynamic SQL.
I'm really trying to get rid of dynamic SQL wherever possible, and this is one of those places I truly think it's possible, but just can't quite figure it out. Note: I have solved this using Dynamic SQL already, and it was fairly easy, but not particularly efficient or elegant.
What I have tried:
Various INNER JOINS between master and filter tables - works for (A) but fails on (B) because the join removes all records from the master (left) side when the filter (right) side has no rows.
LEFT JOINS - Always returns all records from the master (left) side. This fails (A) when some filter tables have records and some do not.
What I really need:
It seems like what I need is to be able to INNER JOIN on each filter table that has 1 or more rows and LEFT JOIN (or not JOIN at all) on each filter table that is empty.
My question: How would I accomplish this without resorting to Dynamic SQL?
In SQL Server 2005+ you could try this:
WITH
filter1 AS (
SELECT DISTINCT
m.ID,
HasMatched = CASE WHEN f.ID IS NULL THEN 0 ELSE 1 END,
AllHasMatched = MAX(CASE WHEN f.ID IS NULL THEN 0 ELSE 1 END) OVER ()
FROM masterdata m
LEFT JOIN filtertable1 f ON join_condition
),
filter2 AS (
SELECT DISTINCT
m.ID,
HasMatched = CASE WHEN f.ID IS NULL THEN 0 ELSE 1 END,
AllHasMatched = MAX(CASE WHEN f.ID IS NULL THEN 0 ELSE 1 END) OVER ()
FROM masterdata m
LEFT JOIN filtertable2 f ON join_condition
),
…
SELECT m.*
FROM masterdata m
INNER JOIN filter1 f1 ON m.ID = f1.ID AND f1.HasMatched = f1.AllHasMatched
INNER JOIN filter2 f2 ON m.ID = f2.ID AND f2.HasMatched = f2.AllHasMatched
…
My understanding is, filter tables without any matches simply must not affect the resulting set. The output should only consist of those masterdata rows that have matched all the filters where matches have taken place.
SELECT *
FROM master_table mt
WHERE (0 = (select count(*) from filter_table_1)
OR mt.id IN (select id from filter_table_1)
AND (0 = (select count(*) from filter_table_2)
OR mt.id IN (select id from filter_table_2)
AND (0 = (select count(*) from filter_table_3)
OR mt.id IN (select id from filter_table_3)
Be warned that this could be inefficient in practice. Unless you have a specific reason to kill your existing, working, solution, I would keep it.
Do inner join to get results for (A) only and do left join to get results for (B) only (you will have to put something like this in the where clause: filterN.column is null) combine results from inner join and left join with UNION.
Left Outer Join - gives you the MISSING entries in master table ....
SELECT * FROM MASTER M
INNER JOIN APPRENTICE A ON A.PK = M.PK
LEFT OUTER JOIN FOREIGN F ON F.FK = M.PK
If FOREIGN has keys that is not a part of MASTER you will have "null columns" where the slots are missing
I think that is what you looking for ...
Mike
First off, it is impossible to have "N number of Joins" or "N number of filters" without resorting to dynamic SQL. The SQL language was not designed for dynamic determination of the entities against which you are querying.
Second, one way to accomplish what you want (but would be built dynamically) would be something along the lines of:
Select ...
From master
Where Exists (
Select 1
From filter_1
Where filter_1 = master.col1
Union All
Select 1
From ( Select 1 )
Where Not Exists (
Select 1
From filter_1
)
Intersect
Select 1
From filter_2
Where filter_2 = master.col2
Union All
Select 1
From ( Select 1 )
Where Not Exists (
Select 1
From filter_2
)
...
Intersect
Select 1
From filter_N
Where filter_N = master.colN
Union All
Select 1
From ( Select 1 )
Where Not Exists (
Select 1
From filter_N
)
)
I have previously posted a - now deleted - answer based on wrong assumptions on you problems.
But I think you could go for a solution where you split your initial search problem into a matter of constructing the set of ids from the master table, and then select the data joining on that set of ids. Here I naturally assume you have a kind of ID on your master table. The filter tables contains the filter values only. This could then be combined into the statement below, where each SELECT in the eligble subset provides a set of master ids, these are unioned to avoid duplicates and that set of ids are joined to the table with data.
SELECT * FROM tblData INNER JOIN
(
SELECT id FROM tblData td
INNER JOIN fa on fa.a = td.a
UNION
SELECT id FROM tblData td
INNER JOIN fb on fb.b = td.b
UNION
SELECT id FROM tblData td
INNER JOIN fc on fc.c = td.c
) eligible ON eligible.id = tblData.id
The test has been made against the tables and values shown below. These are just an appendix.
CREATE TABLE tblData (id int not null primary key identity(1,1), a varchar(40), b datetime, c int)
CREATE TABLE fa (a varchar(40) not null primary key)
CREATE TABLE fb (b datetime not null primary key)
CREATE TABLE fc (c int not null primary key)
Since you have filter tables, I am assuming that these tables are probably dynamically populated from a front-end. This would mean that you have these tables as #temp_table (or even a materialized table, doesn't matter really) in your script before filtering on the master data table.
Personally, I use the below code bit for filtering dynamically without using dynamic SQL.
SELECT *
FROM [masterdata] [m]
INNER JOIN
[filter_table_1] [f1]
ON
[m].[filter_column_1] = ISNULL(NULLIF([f1].[filter_column_1], ''), [m].[filter_column_1])
As you can see, the code NULLs the JOIN condition if the column value is a blank record in the filter table. However, the gist in this is that you will have to actively populate the column value to blank in case you do not have any filter records on which you want to curtail the total set of the master data. Once you have populated the filter table with a blank, the JOIN condition NULLs in those cases and instead joins on itself with the same column from the master data table. This should work for all the cases you mentioned in your question.
I have found this bit of code to be faster in terms of performance.
Hope this helps. Please let me know in the comments.