I realise the answer should probably be 'as little time as possible' but I'm trying to learn how to optimise databases and I have no idea what an acceptable time is for my hardware.
For a start I'm using my local machine with a copy of sql server 2008 express. I have a dual-core processor, 2GB ram and a 64bit OS (if that makes a difference). I'm only using a simple table with about 6 varchar fields.
At first I queried the data without any indexing. This took a ridiculously long amount of time so I cancelled and added a clustered index (using the PK) to the table. This cut the time down to 1 minute 14 sec. I have no idea if this is the best I can get or whether I'm still able to cut this down even further?
Am I limited by my hardware or is there anything else I can do to my table/database/queries to get results faster?
FYI I'm only using a standard SELECT * FROM <Table> to retrieve my results.
EDIT: Just to clarify, I'm only doing this for testing purposes. I don't NEED to pull out all the data, I'm just using that as a consistent test to see if I can cut down the query times.
I suppose what I'm asking is: Is there anything I can do to speed up the performance of my queries other than a) upgrading hardware and b) adding indexes (assuming the schema is already good)?
I think you are asking the wrong question.
First of all - why do you need so many articles at one time on the local machine? What do you want to do with them? I'm asking because I think you want to transfer this of data to somewhere, so you should be measuring how long it takes to transfer the data.
Some advice:
Your applications should not select 5 million records at the time. Try to split your query and get the data in smaller sets.
UPDATE:
Because you are doing this for testing, I suggest that you
Remove * from your query - it takes SQL server some time to resolve this.
Put your data in temporary storage, try using VIEW or a temporary table for this.
Use plan caching on your server
to improve performance. But even if you're just testing, I still don't understand why you would need such tests if your application would never use such a query. Testing just for the sake of testing is a bad use of time
Look at the query execution plan. If your query is doing a table scan, it will obviously take a long time. The query execution plan can help you decide what kind of indexing you would need on the table. Also, creating table partitions can help sometimes in cases where the data is partitioned by a condition (usually date and time).
I did 5.5 million in 20 seconds. That's taking over 100k schedules with different frequencies and forecasting them for the next 25 years. Just max scenario testing, but proves the speed you can achieve in a scheduling system as an example.
The best optimized way depends on the indexing strategy you choose. As many of the above answers, i too would say partitioning the table would help sometimes. And its not the best practice to query all the billion record in a single time frame. Will give you much better results if you could try to query partially with the iterations. you may check this link to clear the doubts on the minimum requirements for the Sql server 2008 Minimum H/W and S/W Requirements for Sql server 2008
When fecthing 5 million rows you are almost 100% going spool to tempdb. you should try to optimize your temp Db by adding additional files. if you have multiple drives on seperate disks you should split the table data into different ndf files located on seperate disks. parititioning wont help when querying all the data on the disk
U can also use a query hint to force parrallelism MAXDOP this will increase the CPU utilization. Ensure that the columns contain few nulls as possible and rebuild ur indexes and stats
Related
One of my projects has a very large database on which I can't edit indexes etc., have to work as it is.
What I saw when testing some queries that I will be running on their database via a service that I am writing in .net. Is that they are quite slow when ran the first time?
What they used to do before is - they have 2 main (large) tables that are used mostly. They showed me that they open SQL Server Management Studio and run a
SELECT *
FROM table1
JOIN table2
a query that takes around 5 minutes to run the first time, but then takes about 30 seconds if you run it again without closing SQL Server Management Studio. What they do is they keep open SQL Server Management Studio 24/7 so that when one of their programs executes queries that are related to these 2 tables (which seems to be almost all queries ran by their program) in order to have the 30 seconds run time instead of the 5 minutes.
This happens because I assume the 2 tables get cached and then there are no (or close to none) disk reads.
Is this a good idea to have a service which then runs a query to cache these 2 tables every now and then? Or is there a better solution to this, given the fact that I can't edit indexes or split the tables, etc.?
Edit:
Sorry just I was possibly unclear, the DB hopefully has indexes already, just I am not allowed to edit them or anything.
Edit 2:
Query plan
This could be a candidate for an indexed view (if you can persuade your DBA to create it!), something like:
CREATE VIEW transhead_transdata
WITH SCHEMABINDING
AS
SELECT
<columns of interest>
FROM
transhead th
JOIN transdata td
ON th.GID = td.HeadGID;
GO
CREATE UNIQUE CLUSTERED INDEX transjoined_uci ON transhead_transdata (<something unique>);
This will "precompute" the JOIN (and keep it in sync as transhead and transdata change).
You can't create indexes? This is your biggest problem regarding performance. A better solution would be to create the proper indexes and address any performance by checking wait stats, resource contention, etc... I'd start with Brent Ozar's blog and open source tools, and move forward from there.
Keeping SSMS open doesn't prevent the plan cache from being cleared. I would start with a few links.
Understanding the query plan cache
Check your current plan cache
Understanding why the cache would clear (memory constraint, too many plans (can't hold them all), Index Rebuild operation, etc. Brent talks about this in this answer
How to clear it manually
Aside from that... that query is suspect. I wouldn't expect your application to use those results. That is, I wouldn't expect you to load every row and column from two tables into your application every time it was called. Understand that a different query on those same tables, like selecting less columns, adding a predicate, etc could and likely would cause SQL Server to generate a new query plan that was more optimized. The current query, without predicates and selecting every column... and no indexes as you stated, would simply do two table scans. Any increase in performance going forward wouldn't be because the plan was cached, but because the data was stored in memory and subsequent reads wouldn't experience physical reads. i.e. it is reading from memory versus disk.
There's a lot more that could be said, but I'll stop here.
You might also consider putting this query into a stored procedure which can then be scheduled to run at a regular interval through SQL Agent that will keep the required pages cached.
Thanks to both #scsimon #Branko Dimitrijevic for their answers I think they were really useful and the one that guided me in the right direction.
In the end it turns out that the 2 biggest issues were hardware resources (RAM, no SSD), and Auto Close feature that was set to True.
Other fixes that I have made (writing it here for anyone else that tries to improve):
A helper service tool will rearrange(defragment) indexes once every
week and will rebuild them once a month.
Create a view which has all the columns from the 2 tables in question - to eliminate JOIN cost.
Advised that a DBA can probably help with better tables/indexes
Advised to improve server hardware...
Will accept #Branko Dimitrijevic 's answer as I can't accept both
Folks, I'm using BigQuery as a superfast database for my analytics queries, but I'm very disappointed with its performance.
Let me show you the numbers:
Just one Table at "from" clause
Select about 15 fields with group by each, about 5 fields with SUM()
Total table rows: 3.7 millions
Total rows returned: 830K
When I execute this query on BigQuery's console, it takes about 1 minute to process. Is this ok for you? I was expecting that it will return in about 2 seconds... If I execute this query on a columnar database, like Sybase IQ, it takes less than 2 seconds.
Big Query is a highly scalable database, before being a "super fast" database. It's designed to process HUGE amount of data distributing the processing among several different machines using a technique named Dremel. Because it's designed to use several machines and parallel processing, you should expect to have super-scalability with a good performance.
For example: analyzing all the wikipedia revisions in 5-10 seconds isn't bad, is it? But even a much smaller table would take about the same time.
Sybase IQ is often installed in a single database and it doesn't use Dremel. That said, it's going to be faster than Big Query in many scenarios...as designed.
Cheers!
Since you are returning 830k rows and BQ is always creating a temporary result table, the creation is more than a small result.
Have you turned on large results?
We are working in a shared environment and sometime loads ( table creation ) takes a while.
Certainly the performance differ from a dedicated environment. You get your dedicated environment for 20K$ a month.
I am new to SQL/RDBMS.
I have an application which adds rows with 10 columns in PostgreSQL server using the libpq library. Right now, my server is running on same machine as my visual c++ application.
I have added around 15-20 million records. The simple query of getting total count is taking 4-5 minutes using select count(*) from <tableName>;.
I have indexed my table with the time I am entering the data (timecode). Most of the time I need count with different WHERE / AND clauses added.
Is there any way to make things fast? I need to make it as fast as possible because once the server moves to network, things will become much slower.
Thanks
I don't think network latency will be a large factor in how long your query takes. All the processing is being done on the PostgreSQL server.
The PostgreSQL MVCC design means each row in the table - not just the index(es) - must be walked to calculate the count(*) which is an expensive operation. In your case there are a lot of rows involved.
There is a good wiki page on this topic here http://wiki.postgresql.org/wiki/Slow_Counting with suggestions.
Two suggestions from this link, one is to use an index column:
select count(index-col) from ...;
... though this only works under some circumstances.
If you have more than one index see which one has the least cost by using:
EXPLAIN ANALYZE select count(index-col) from ...;
If you can live with an approximate value, another is to use a Postgres specific function for an approximate value like:
select reltuples from pg_class where relname='mytable';
How good this approximation is depends on how often autovacuum is set to run and many other factors; see the comments.
Consider pg_relation_size('tablename') and divide it by the seconds spent in
select count(*) from tablename
That will give the throughput of your disk(s) when doing a full scan of this table. If it's too low, you want to focus on improving that in the first place.
Having a good I/O subsystem and well performing operating system disk cache is crucial for databases.
The default postgres configuration is meant to not consume too much resources to play nice with other applications. Depending on your hardware and the overall utilization of the machine, you may want to adjust several performance parameters way up, like shared_buffers, effective_cache_size or work_mem. See the docs for your specific version and the wiki's performance optimization page.
Also note that the speed of select count(*)-style queries have nothing to do with libpq or the network, since only one resulting row is retrieved. It happens entirely server-side.
You don't state what your data is, but normally the why to handle tables with a very large amount of data is to partition the table. http://www.postgresql.org/docs/9.1/static/ddl-partitioning.html
This will not speed up your select count(*) from <tableName>; query, and might even slow it down, but if you are normally only interested in a portion of the data in the table this can be helpful.
I am trying to optimize the search query which is the most used in our system. So far I have added some missing indexes and that has helped slightly. But I want to further reduce the load on the db server. One option that I will use is caching the result set as a LIST in the asp.net Cache so that I don't have to hit the db often.
However, I was wondering if there is a way to Cache some portions of the select query at the db as well. e.g. for the search results we consider only users who have been active in the last 180 days and who have share-info set as true. So this is like a super set which the db processes everytime and then applies other conditions such as category specified, city etc. which are passed. Is it possible to somehow Cache the Super Set so that I can run queries against the super set rather than run the query against the whole table? Will creating a View help in this? I am a bit hesitant to create a view as I read managing views can be an overhead and takes away some flexibility to modfy the tables.
I am using Sql-Server 2005 so cannot create a filtered index on the table, which I think would have been helpful.
I agree with #Neville K. SQL Server is pretty smart at caching data in memory. You might see limited / no performance gains for your effort.
You could consider indexed views (Enterprise Edition only) http://technet.microsoft.com/en-us/library/cc917715.aspx for your sub-query.
It is, of course, possible to do this - but I'm not sure if it will help.
You can create a scheduled job - once a night, perhaps - which populates a table called "active_users_with_share_info" by truncating it, and then repopulating it based on a select query filtering out users active in the last 180 days with "share_info = true".
Then you can join your search query to this table.
However, I doubt this would do much good - SQL Server is pretty smart at caching. Unless you're dealing with huge volumes of data (100 of millions of records), or very limited hardware, I doubt you'd get any measurable performance improvements - but by all means try it!
Of course, the price for this would be more moving parts in your application, more interesting failure modes (what happens if the overnight batch fails silently?), and more training for any new developers you bring into the team.
I've a MySQL InnoDB table with 1,000,000 records. Is this too much? Or databases can handle this and more? I ask because I noticed that some queries (for example, getting the last row from a table) are slower (seconds) in the table with 1 millon rows than in one with 100.
I've a MySQL InnoDB table with 1000000 registers. Is this too much?
No, 1,000,000 rows (AKA records) is not too much for a database.
I ask because I noticed that some queries (for example, getting the last register of a table) are slower (seconds) in the table with 1 million registers than in one with 100.
There's a lot to account for in that statement. The usual suspects are:
Poorly written query
Not using a primary key, assuming one even exists on the table
Poorly designed data model (table structure)
Lack of indexes
I have a database with more than 97,000,000 records(30GB datafile), and having no problem .
Just remember to define and improve your table index.
So its obvious that 1,000,000 is not MANY ! (But if you don't index; yes, it is MANY )
Use 'explain' to examine your query and see if there is anything wrong with the query plan.
I think this is a common misconception - size is only one part of the equation when it comes to database scalability. There are other issues that are hard (or harder):
How large is the working set (i.e. how much data needs to be loaded in memory and actively worked on). If you just insert data and then do nothing with it, it's actually an easy problem to solve.
What level of concurrency is required? Is there just one user inserting/reading, or do we have many thousands of clients operating at once?
What levels of promise/durability and consistency of performance are required? Do we have to make sure that we can honor each commit. Is it okay if the average transaction is fast, or do we want to make sure that all transactions are reliably fast (six sigma quality control like - http://www.mysqlperformanceblog.com/2010/06/07/performance-optimization-and-six-sigma/).
Do you need to do any operational issues, such as ALTER the table schema? In InnoDB this is possible, but incredibly slow since it often has to create a temporary table in foreground (blocking all connections).
So I'm going to state the two limiting issues are going to be:
Your own skill at writing queries / having good indexes.
How much pain you can tolerate waiting on ALTER TABLE statements.
If you mean 1 million rows, then it depends on how your indexing is done and the configuration of your hardware. A million rows is not a large amount for an enterprise database, or even a dev database on decent equipment.
if you mean 1 million columns (not sure thats even possible in MySQL) then yes, this seems a bit large and will probably cause problems.
Register? Do you mean record?
One million records is not a real big deal for a database these days. If you run into any issue, it's likely not the database system itself, but rather the hardware that you're running it on. You're not going to run into a problem with the DB before you run out of hardware to throw at it, most likely.
Now, obviously some queries are slower than others, but if two very similar queries run in vastly different times, you need to figure out what the database's execution plan is and optimize for it, i.e. use correct indexes, proper normalization, etc.
Incidentally, there is no such thing as a "last" record in a table, from a logical standpoint they have no inherent order.
I've seen non-partitioned tables with several billion (indexed) records, that self-joined for analytical work. We eventually partitioned the thing but honestly we didn't see that much difference.
That said, that was in Oracle and I have not tested that volume of data in MySQL. Indexes are your friend :)
Assuming you mean "records" by "registers" no, it's not too much, MySQL scales really well and can hold as many records as you have space for in your hard disk.
Obviously though search queries will be slower. There is really no way around that except making sure that the fields are properly indexed.
The larger the table gets (as in more rows in it), the slower queries will typically run if there are no indexes. Once you add the right indexes your query performance should improve or at least not degrade as much as the table grows. However, if the query itself returns more rows as the table gets bigger, then you'll start to see degradation again.
While 1M rows are not that many, it also depends on how much memory you have on the DB server. If the table is too big to be cached in memory by the server, then queries will be slower.
Using the query provided will be exceptionally slow because of using a sort merge method to sort the data.
I would recommend rethinking the design so you are using indexes to retrieve it or make sure it is already ordered in that manner so no sorting is needed.