I know that in Objective C, every object has first 4 bytes [depending upon type of processor ] as an isa pointer stored in it that tells which class it belongs to and what dispatch table to use to resolve a selector to address of a function.
What I wanted to know was , how are data members stored and accessed in these methods.
self is passed as an implicit object in each function being called.
We use setters n getters to handle data members in other member function as a good practice,
but when we directly refer to a data member in an initializer or an accesor, how are they accessed. Are they replaced by some address at compile time or something else ?
Actually afaik the memory layout is implementation specific, but http://algorithm.com.au/downloads/talks/objective-c-internals/objective-c-internals.pdf should give you a pretty good idea of the inner works of object data and object messaging.
When you use a direct member access, what basically happens is that you're fetching straight from the "struct" that is your actual object. That is, the compiler is basically just adding an offset to the address of your object/struct and reading the contents of that memory address.
Maybe I should add that this is reverse engineered from XCode and not written in any specification I can find, so depending on this behavior is most likely a bad idea. Since external access to the iVars is not allowed, the decision is basically up to the compiler and could be changed at any time.
Edit: as #FrederickCheung points out, Objective C 2.0 may have changed this behavior.
It's not as simple as a compile time offset calculation, at least not in objective C 2.0 on the 64bit OS X and iOS runtimes. These support stuff like superclasses changing their instance variable layout without breaking subclasses that were compiled against the old layout by adding a layer of indirection.
The runtime api docs describe the API one can use to set instance variables and so on but doesn't elaborate on their implementation.
Related
I am using Objective-C without ARC and want to know if I need to free the device returned by MTLCreateSystemDefaultDevice when used like so:
id<MTLDevice> device = MTLCreateSystemDefaultDevice()
I am not sure how id<MTLDevice> works to maintain a reference count. Based on the naming conventions for memory management, I am assuming MTLCreateSystemDefaultDevice does not add reference (but could be wrong), but maybe assigning to id<MTLDevice> results in a retain being called?
Yes, you need to release the object when you're done with it. For C functions (rather than Objective-C messages), the relevant naming convention is the Create Rule. Because the function has "Create" in the name, it returns a +1 reference that you are responsible for releasing. (The fact that it's returning an Objective-C type rather than a Core Foundation type isn't important.)
As to id<MTLDevice>, that's id, the generic object type of Objective-C, with a protocol designation <MTLDevice> indicating that the object pointed to by device conforms to the MTLDevice protocol. (Somewhat oddly, that's actually more restrictive than id alone, since the compiler will then warn if you try to invoke methods other than those supported by MTLDevice and its super-protocols.) Not that the object is of some concrete class behind the scenes, it's just a private implementation detail.
I'm new to Objective-C and was wondering if anyone could provide any information to clarify this for me. My (possibly wrong) understanding of object instantiation in other languages is that the object will get it's own copies of instance variables as well as instance methods, but I'm noticing that all the literature I've read thus far about Objective-C seems to indicate that the object only gets copies of instance variables, and that even when calling an instance method, program control reverts back to the original method defined inside the class itself. For example, this page from Apple's developer site shows program flow diagrams that suggest this:
https://developer.apple.com/library/mac/documentation/cocoa/conceptual/ProgrammingWithObjectiveC/WorkingwithObjects/WorkingwithObjects.html#//apple_ref/doc/uid/TP40011210-CH4-SW1
Also in Kochan's "Programming in Objective-C", 6th ed., pg. 41, referring to an example fraction class and object, the author states that:
"The first message sends the setNumerator: message to myFraction...control is then sent to the setNumerator: method you defined for your Fraction class...Objective-C...knows that it's the method from this class to use because it knows that myFraction is an object from the Fraction class"
On pg. 42, he continues:
"When you allocate a new object...enough space is reserved in memory to store the object's data, which includes space for its instance variables, plus a little more..."
All of this would seem to indicate to me that there is only ever one copy of any method, the original method defined within the class, and when calling an instance method, Objective-C simply passes control to that original copy and temporarily "wires it" to the called object's instance variables. I know I may not be using the right terminology, but is this correct? It seems logical as creating multiple copies of the same methods would be a waste of memory, but this is causing me to rethink my entire understanding of object instantiation. Any input would be greatly appreciated! Thank you.
Your reasoning is correct. The instance methods are shared by all instances of a class. The reason is, as you suspect, that doing it the other way would be a massive waste of memory.
The temporary wiring you speak of is that each method has an additional hidden parameter passed to it: a pointer to the calling object. Since that gives the method access to the calling object, then it can easily access all of the necessary instance variables and all is well. Note that any static variable exists in only a single instance as well and if you are not aware of that, unexpected things can happen. However, regular local variables are not shared and are recreated for each call of a method.
Apple's documention on the topic is very good so have a look for more info.
Just think of a method as a set of instructions. There is no reason to have a copy of the same method for each object. I think you may be mistaken about other languages as well. Methods are associated with the class, not individual objects.
Yes, your thinking is more or less right (although it's simpler than that: behind the scenes in most such languages methods don't need to be "wired" to anything, they just take an extra parameter for self and insert struct lookups before references to instance variables).
What might be confusing you is that not all languages work this way, in their implementations and semantically. Object-oriented languages are (very roughly) divided into two camps: class-based, like Objective-C; and prototype-based, like Javascript. In the second camp of languages, a method or procedure really is an object in its own right and can often be assigned directly to an object's instance variables as well - there are no classes to lookup methods from, only objects and other objects, all with the same first-class status (this is an oversimplification, good languages still allow for sharing and efficiency).
I have ARC code of the following form:
NSMutableData* someData = [NSMutableData dataWithLength:123];
...
CTRunGetGlyphs(run, CGRangeMake(0, 0), someData.mutableBytes);
...
const CGGlyph *glyphs = [someData mutableBytes];
...
...followed by code that reads memory from glyphs but does nothing with someData, which isn't referenced anymore. Note that CGGlyph is not an object type but an unsigned integer.
Do I have to worry that the memory in someData might get freed before I am done with glyphs (which is actually just pointing insidesomeData)?
All this code is WITHIN the same scope (i.e., a single selector), and glyphs and someData both fall out of scope at the same time.
PS In an earlier draft of this question I referred to 'garbage collection', which didn't really apply to my project. That's why some answers below give it equal treatment with what happens under ARC.
You are potentially in trouble whether you use GC or, as others have recommended instead, ARC. What you are dealing with is an internal pointer which is not considered an owning reference in either GC or ARC in general - unless the implementation has special-cased NSData. Without that owning reference either GC or ARC might remove the object. The problem you face is peculiar to internal pointers.
As you describe your situation the safest thing to do is to hang onto the real reference. You could do this by assigning the NSData reference to either an instance variable or a static (method local if you wish) variable and then assigning nil to that variable when you've done with the internal pointer. In the case of static be careful about concurrency!
In practice your code will probably work in both GC and ARC, probably more likely in ARC, but either could conceivably bite you especially as compilers change. For the cost of one variable declaration and one extra assignment you avoid the problem, cheap insurance.
[See this discussion as an example of short lifetime under ARC.]
Under actual, real garbage collection that code is potentially a problem. Objects may be released as soon as there is no longer any reference to them and the compiler may discard the reference at any time if you never use it again. For optimisation purposes scope is just a way of putting an upper limit on that sort of thing, not a way of dictating it absolutely.
You can use NSAllocateCollectable to attach lifecycle calculation to C primitive pointers, though it's messy and slightly convoluted.
Garbage collection was never implemented in iOS and is now deprecated on the Mac (as referenced at the very bottom of this FAQ), in both cases in favour of automatic reference counting (ARC). ARC adds retains and releases where it can see that they're implicitly needed. Sadly it can perform some neat tricks that weren't previously possible, such as retrieving objects from the autorelease pool if they've been used as return results. So that has the same net effect as the garbage collection approach — the object may be released at any point after the final reference to it vanishes.
A workaround would be to create a class like:
#interface PFDoNothing
+ (void)doNothingWith:(id)object;
#end
Which is implemented to do nothing. Post your autoreleased object to it after you've finished using the internal memory. Objective-C's dynamic dispatch means that it isn't safe for the compiler to optimise the call away — it has no way of knowing you (or the KVO mechanisms or whatever other actor) haven't done something like a method swizzle at runtime.
EDIT: NSData being a special case because it offers direct C-level access to object-held memory, it's not difficult to find explicit discussions of the GC situation at least. See this thread on Cocoabuilder for a pretty good one though the same caveat as above applies, i.e. garbage collection is deprecated and automatic reference counting acts differently.
The following is a generic answer that does not necessarily reflect Objective-C GC support. However, various GC implementaitons, including ref-counting, can be thought of in terms of Reachability, quirks aside.
In a GC language, an object is guaranteed to exist as long as it is Strongly-Reachable; the "roots" of these Strong-Reachability graphs can vary by language and executing environment. The exact meaning of "Strongly" also varies, but generally means that the edges are Strong-References. (In a manual ref-counting scenario each edge can be thought of as an unmatched "retain" from a given "owner".)
C# on the CLR/.NET is one such implementation where a variable can remain in scope and yet not function as a "root" for a reachability-graph. See the Systems.Timer.Timer class and look for GC.KeepAlive:
If the timer is declared in a long-running method, use KeepAlive to prevent garbage collection from occurring [on the timer object] before the method ends.
As of summer 2012, things are in the process of change for Apple objects that return inner pointers of non-object type. In the release notes for Mountain Lion, Apple says:
NS_RETURNS_INNER_POINTER
Methods which return pointers (other than Objective C object type)
have been decorated with the clang compiler attribute
objc_returns_inner_pointer (when compiling with clang) to prevent the
compiler from aggressively releasing the receiver expression of those
messages, which no longer appear to be referenced, while the returned
pointer may still be in use.
Inspection of the NSData.h header file shows that this also applies from iOS 6 onward.
Also note that NS_RETURNS_INNER_POINTER is defined as __attribute__((objc_returns_inner_pointer)) in the clang specification, which makes it such that
the object's lifetime will be extended until at least the earliest of:
the last use of the returned pointer, or any pointer derived from it,
in the calling function;
or the autorelease pool is restored to a
previous state.
Caveats:
If you're using anything older then Mountain Lion or iOS 6 you will still need to use any of the methods discussed here (e.g., __attribute__((objc_precise_lifetime))) when declaring your local NSData or NSMutableData objects.
Also, even with the newest compiler and Apple libraries, if you use older or third party libraries with objects that do not decorate their inner-pointer-returning methods with __attribute__((objc_returns_inner_pointer)) you will need to decorate your local variables declarations of such objects with __attribute__((objc_precise_lifetime)) or use one of the other methods discussed in the answers.
I was reading Apple's documentation, The Objective-C Programming Language (PDF link). On pg. 18, under The Receiver’s Instance Variables, I saw this.
A method has automatic access to the receiving object’s instance
variables. You don’t need to pass them to the method as parameters.
For example, the primaryColor method illustrated above takes no
parameters, yet it can find the primary color for otherRect and return
it. Every method assumes the receiver and its instance variables,
without having to declare them as parameters.
This convention simplifies Objective-C source code. It also supports
the way object-oriented programmers think about objects and messages.
Messages are sent to receivers much as letters are delivered to your
home. Message parameters bring information from the outside to the
receiver; they don’t need to bring the receiver to itself.
I am trying to better understand what they are describing; is this like Python's self parameter, or style?
Objective-C is a strict superset of C.
So Objective-C methods are "just" function pointers, and instances are "just" C structs.
A method has two hidden parameters. The first one is self(the current instance), the second _cmd (the method's selector).
But what the documentation is describing in page 18 is the access to the class instance variables from a method.
It just says a method of a class can access the instance variables of that class.
It's pretty basic from an object-oriented perspective, but not from a C perspective.
It also say that you can't access instance variables from another class instance, unless they are public.
While I would not say that it is a "slam" against Python, it is most certainly referring to the Python style of Object Orientation (which, in honesty, is derived from the "pseudo-object orientation" available in C (whether it is truly OO or not is a debate for another forum)).
It is good to remember that Python has a very different concept of scope from the rest of the world — each method more or less exists in its own little reality. This is contrasted with more "self-aware" languages which either have a "this" variable or an implicit instance construct of some form.
I'm starting to code in objective-c and I've just realized that objects can only be passed by reference.
What if I need an object to use static memory by default and to be copied instead of referenced?
For example, I have an object Color with 3 int components r, g and b. I dont want these objects to be in dynamic memory and referenced when passing to functions, I want them immutable and to be copied like an int or a float.
I know I can use a c struct, but I also need the object Color to have methods that gets/sets lightness, hue, saturation, etc. I want my code to be object oriented.
Is there any solution to this?
EDIT: If for example I'm building a 3d game engine, where I'll have classes like Vector2, Vector3, Matrix, Ray, Color, etc: 1) I need them to be mutable. 2) The size of the objects is roughly the same size of a pointer, so why would I be copying pointers when I can copy the object? It would be simpler, more efficient, and I wouldnt need to manage memory, specially on methods that returns colors. And In the case of a game engine, efficiency is critical.
So, if there is no solution to this... Should I use c-structs and use c-function to work on them? Isn't there a better choice?
Thanks.
You can't do this. This isn't how Objective-C works (at least the Apple/GNU version*). It simply isn't designed for that sort of extreme low-level efficiency. Objects are allocated in dynamic memory and their lifetimes are controlled by methods you call on them, and that's just how it works. If you want more low-level efficiency, you can either use plain C structs or C++. But keep in mind that worrying about this is pointless in 99% of circumstances — the epitome of premature optimization. Objective-C programs are generally very competitive with C++ equivalents both in execution speed and memory use despite this minor inefficiency. I wouldn't go for a more difficult solution until profiling had proved it to be necessary.
Also, when you're new to Objective-C, it's easy to psych yourself out over memory management. In a normal Cocoa (Touch) program, you shouldn't need to bother about it too much. Return autoreleased objects from methods, use setters to assign objects you want to keep around.
*Note: There was an old implementation of Objective-C called the Portable Object Compiler that did have this ability, but it's unrelated to and incompatible with the Objective-C used on Macs and iOS devices. Also, the Apple Objective-C runtime includes special support for Blocks to be allocated on the stack, which is why you must copy them (copy reproduces the block in dynamic memory like a normal object) if you want to store them.
What if I need an object to use static memory by default and to be copied instead of referenced?
You don't.
Seriously. You never need an object to use static memory or be allocated on the stack. C++ allows you to do it, but no other object oriented language I know does.
For example, I have an object Color with 3 int components r, g and b. I dont want these objects to be in dynamic memory and referenced when passing to functions, I want them immutable and to be copied like an int or a float.
Why do you not want the objects to be in static memory? What advantage do you think that gives you?
On the other hand it's easy to make Objective-C objects immutable. Just make the instance variables private and don't provide any methods that can change them once the object is initialised. This is exactly how the built in immutable classes work e.g. NSArray, NSString.
One solution that people use sometimes is to use a singleton object (assuming you only need one of the objects for your entire app's lifetime). In that case, you define a class method on the class and have it return an object that it creates once when it is first requested. So you can do something like:
#implementation MyObject
+ (MyObject *)sharedObjectInstance
{
static MyObject *theObject=nil;
if (theObject==nil)
{
theObject = [[MyObject alloc] init];
}
return theObject;
}
#end
Of course the object itself isn't what's being statically allocated, it's the pointer to the object that's statically allocated, but in any case the object will stick around until the application terminates.
There are times when you want to do this because you really only want one globally shared instance of a particular object. However, if that's not your objective, I'm not sure why you'd want to do what you're describing. You can always use the -copy method to create a copy of an object (assuming the object conforms to the NSCopying protocol) to manipulate without touching the original.
EDIT: Based on your comments above it seems you just want to have immutable objects that you can copy and modify the copies. So using -copy is probably the way to go.