I don't know why? Whenever I install AOL desktop (9.5, 9.6, 10.0) on my computer and I'm connected to the internet using cable, every thing is ok. I can browse websites and sign in to AOL.
But whenever I connect to the internet using my wireless network at home, I can not sign in to AOL, but I can still browse the web.
My wireless network uses WPA2-Personal with AES encryption type.
I always get the AC-3000 error message whenever I want to sign into AOL. None of AOL solutions could be useful to solve this.
What do I have to do ?
You didn't mention what version of windows you are using but my suspicion would be that if you are on Windows Vista/7 then the cable connection is identified as "home" or private and that the wireless connection is identified as public and the AOL connection (which used to be on port 5190 IIRC) is getting blocked as a result.
If I am right, to change what apps have access on which network types, you can follow the instructions here:
http://www.addictivetips.com/windows-tips/how-to-stop-a-program-from-gaining-unsolicited-internet-access-in-windows-7/
Although it is about how to stop a program from accessing the internet, it works just as well the other way around ;)
You could use netstat to determine what the successful connection to AOL is on the cable set up in terms of destination and IP and then attempt a simple telnet connection to the same address/port on the wireless set up to verify if this is blocked at the network/port level or if it is blocking the application (usually referred to as ACS). If the telnet connection succeeds and does not timeout, then it is an application level restriction which you will need to fix .
Related
is there a way to connect a dvr tuner to a Plex Server hosted in Hyper-V?
I have searched but could not find a Question about this topic.
My build is a Win22 Datacenter Server running Plex in Hyper-V. A Hauppauge dualHD is connected to the Win22 Datacenter Server via USB.
Thanks for your help!
Current Answer
I'm updating my answer as I didn't realize it was a tuner and not a DVR box connected to your TV.
From what I'm seeing online, your best bets are:
use Enhanced Session Mode to connect the device over RDP (which only supports some devices)
use a third-party tool such as Donglify (this is from results on Google. Buy at your own digression) to allow USB passthrough
use a Type 2 hypervisor (VirtualBox, VMware) to run your instance of Plex instead
run Plex outside of Hyper-V on the same system with a sandboxed user
run Plex on another device entirely, such as a Raspberry Pi.
I can't help with the first, as it requires some gpedit.msc magic I cannot do, or second as I have never used one.
3rd option will reduce program speeds which may cause slowdown if multiple people stream at once.
4th option is my personal recommendation, as you bypass the need to use a hypervisor entirely and keep on the same device.
5th is only good if you use a USB-based drive and have a decent bit of experience with Linux.
Old Answer
Kept for the sake of archival.
You'll want to use Powershell and the Add-NetNatStaticMapping cmdlet to allow inbound connections to the Hyper-V server. This will need a vNAT adapter set up. See the linked blog post (not mine) if you need help with that, too.
Assuming the vEthernet connection has an internal IP of 192.168.10.2 and a NAT network name of NATSwitch, with Plex on the default port of 32400:
Add-NetNatStaticMapping -ExternalIPAddress "0.0.0.0/24" -ExternalPort 32400 -Protocol TCP -InternalIPAddress "192.168.10.2" -InternalPort 32400 -NatName NATNetwork
You will most likely need to replace the internal IP, port, and NAT name.
After this is set up, you'll need to point your DVR to the IP of the Windows Server box.
Sites referenced:
Plex support page on ports to forward
A GitHub user's blog, specifically a post on port forwarding
Currently I have learned how to config my Pi to connect to the WIFI with or without a password, however when I wanna use the WIFI in, say a coffee house or a hotel, where the WIFI provided requires logging on a captive portal to get to use it, I know that with a browser it could be easy to do it since the login page appears right up as you open the browser, but how can I do it with my Pi through the command line?
Thank you.
Assuming you are not asking how to script repeatedly connecting to a certain captive portal (this could potentially be accomplished with curl), you probably want to use a text-based web browser like Elinks or Lynx.
I have connected to the internet through a modem named QUBEE which shows as the connection 'Ethernet 2'. However, I have a tab and kindle fire. so, I decided to create a virtual network or hosted network in my laptop. So, I created a hosted network with a numeric pass key (8-digits). The authentication type is WPA2-Personal. I shared the net of Ethernet 2 with it. However, i tried with both my tab and kindle fire, but it shows 'Authentication problem'.
Both of the kindle fire and tab remains in 'Obtaining IP address...' state a lot of time.
One thing I noticed that, when the device is not connected to the virtual network, its network strength remains strong. but it tries to connect, it becomes poor.
Another thing is that the authentication type of that recognize by both tab and kindle fire is WPA2 PSK. where the laptop has WPA2-Personal.
My laptop configuration is i5#2.5GHz, Windows 8.1, RAM: 6.00GB, Lenovo G480.
Thanks in advance for trying to help me.
How to enable Hyper-V to connect VPN for external internet access in Windows 8?
I'm trying to run Windows phone 8 app using emulator, and while see app in emulator it doesn't connect the VPN to access internet.
Please advice.
Thanks.
MSDN has a troubleshooting page for the Windows Phone 8 emulator. Perhaps you can find related info there. Something like this might help:
Cannot connect to Internet destinations
The Windows Phone 8 Emulator uses the HTTP proxy settings from the host computer. If you can’t access Internet resources from the emulator, check with your IT administrator to make sure that your proxy settings will work with the emulator.
If your network’s proxy servers are unavailable or malfunctioning, it might be possible to restore connectivity for the emulator by disabling automatic proxy detection on the host computer. However this only works in certain network configurations.
To disable automatic proxy detection on the host computer
On the host computer, open Internet Options from the Control Panel. The Internet Properties dialog box opens.
In the Internet Properties dialog box, click the Connections tab.
On the Connections page, click the LAN settings button. The Local Area Network (LAN) Settings dialog box opens.
In the Local Area Network (LAN) Settings dialog box, deselect all the check boxes. Click OK twice to close both dialog boxes.
Restart the emulator and retry the connection.
Also this MSDN blog-post can be helpful: Why can’t the Windows Phone Emulator go online?. Useful part of the article:
As you see, clicking the “>>” on the bar parallel to the Emulator will open a small window with 4 tabs. The last tab is for “Network”. To explain in simpler terms, there are two adapters here – one is for internal use by Emulator and other is for external network connectivity. Each adapter will have an IP address (IPv4) associated with itself. The one of our interest is under Adapter #2.
I have erased out the IPv4 address that is assigned to Adapter #2 (Yellow box), but you find that the IP assigned here starts with 169.254.x.x…., then Bingo! - we have figured out the problem. How?
The IP addresses starting with 169.254.x.x …. Are usually the self-assigned default addresses to a device and not really helpful to get the device to go online. This IP should either be a static IP or the one assigned by the DHCP server (if you have one in the environment) for the device to be able to connect to external networks.
Hope this helps.
I have a piece of software I have written that talks to a web service over it's Wifi connection on a Casio WinCE handheld.
Unfortunately the Wifi network and the network created by WMDC (or ActiveSync) to host the debugger connection clash, they are both 192.168.55.0/24. So I can't have them both connected at the same time.
Does anybody know if you can reconfigure WMDC to use a different address range?
I've hunted through the registry but can't see anything obvious, and Google is not turning up anything useful.
Thanks,
James.
Is the development PC on teh same network as the WiFi connection? If so, I'd abandon ActiveSync/WMDC altogetehr and just use ethernet debugging over the same connection that it's using for the web service calls.