Is there a way I can get a attribute set in ServletContext in EL so that it ends up as a JavaScript variable?
I am setting it as
context.setAttribute("testing.port", "9000");
I tried retrieving it like
alert("port" +'${testing.port}');
I am just getting a blank.
The problem is the period (.) in the key name. EL interprets the period as a call to an accessor method named getPort1 on whatever object testing references. Fetch the value from the appropriate implicit object:
${applicationScope['testing.port']}
or just use a different key:
${testingPort}
1Yes, this is a simplification of what really happens. It may also look for a predicate getter named isPort, or try Map#get("port").
Related
I am trying to log field writes with bytebuddy. After reading some earlier posts, I started using MemberSubstitution and got something going using the following code:
private static Method FIELD_INTERCEPTOR = // reflective reference to interceptFieldWrite
AsmVisitorWrapper VISITOR = MemberSubstitution.relaxed()
.field(ElementMatchers.any())
.onWrite()
.replaceWith(FIELD_INTERCEPTOR)
.on(ElementMatchers.isMethod());
..
public static void interceptFieldWrite(Object object,Object value) {
System.out.println("intercepted field write in object " + object + " , attempt to set value to " + value);
}
..
The part I am struggling with is how to pass a reference to the field for which the access is intercepted to interceptFieldWrite (as string or instance of Field). If possible I would of course like to avoid reflection completely. I don't actually want to completely substitute field access, but just want to add a method with some checks just before it takes place. Is there a feature in bytebuddy to do this, or do I have to use something more low-level than ASM to achieve this ?
Byte Buddy offers this but you will have to compose your own StackManipulations to do so. The mechanism in MemberSubstitution is called replaceWithChain. Here you specify Steps where each step can do what you intend:
invoke a method via MethodInvocation.
write a field via FieldAccessor.
You will have to load the arguments to the method call and the field access prior to using the above stack manipulations via the MethodVariableAccess where the targeted element's offsets are represented by offsets.
In your case, this would require to read the target instance via
MethodVaribaleAccess.of(parameters.get(0)).loadFrom(offsets.get(0));
MethodVaribaleAccess.of(parameters.get(1)).loadFrom(offsets.get(1));
and the to execute the method or field write in question. The targeted field will be passed as target, you can cast it to FieldDescription if you only ever intercept fields.
Make sure you only intercept non-static fields where the this instance will not be passed.
In my current project in Access VBA, I created a window which works like a console and now I am trying to add a possibility to display any public variable. It should work like:
Show_var [variable_name]
So it should be like in the direct window where i can type:
? pVar.variable_A
I found out that using
Application.VBE.ActiveVBProject.VBComponents(11).CodeModule.CountOfLines
I can display the number of lines within a module or form so I thought perhaps I could somehow find the variables there, cycle through them and when the correct one is found, its value can be shown. OFC I could make a Select Case Statement where all variables are included but that is not the way I want to do it because it is complicated and must be changed every time update my public variable list.
There are so many problems that I think you are out of luck. Let me just list some of them:
There is no way to get a list of all variables - that would mean you would need access to the internal symbol table.
As a consequence, you would have to read the code (CodeModule lets you read the code of a module), and write an own parser to fetch all declarations (hopefully you use Option Explicit)
AFAIK, the is no method that can access the content of a variable via it's name.
Even if there would be any such method: What would you do with different data types, arrays and especially with objects.
If a user runs into problems, often it is a runtime error. If you don't handle that errors with some kind of error handler, the only option if a user cannot enter the debugger is to press "End" - which would destroy the content of all variables.
You have to deal with scope of variables, you can have several variables with the same name and you will likely have lots of variables that are out of scope in the moment you want to dump them.
I am trying to assign the value of this stucture path to a fieldsymbol, but this path does not work because it has a table in it's path.
But with in the debugger this value of this path is shown correctly.
Is there a way to dynamically assign a component of a table line to a fieldsymbol, by passing one path?
If not then I will just read the table line and then use the path to get the wanted value.
ls_struct (Struct)
- SUPPLYCHAINTRADETRANSACTION (Struct)
- INCL_SUPP_CHAIN_ITEM (Table)
- ASSOCIATEDDOCUMENTLINEDOCUMENT (Element)
i_component_path = |IG_DDIC-SUPPLYCHAINTRADETRANSACTION-INCL_SUPP_CHAIN_ITEM[1]-ASSOCIATEDDOCUMENTLINEDOCUMENT|.
ASSIGN (i_component_path) TO FIELD-SYMBOL(<lg_value>).
IF <lg_value> IS NOT ASSIGNED.
return.
ENDIF.
<lg_value> won't be assigned
Solution by Sandra Rossi
The debugger has its own syntax and own logic, it doesn't apply the ASSIGN algorithm at all. With ABAP source code, you have to use ASSIGN twice, the first one to reach the internal table, then you select the first line, and the second one to reach the component of the line.
The debugger works completely differently, the debugger code works only in debug mode, you can't call the code from the debugger (i.e. if you call it, the kernel code used by the debugger will fail). No, there's no "abappath". There are the XSL transformation objects (xpath), but it's slow for what you ask.
Thank you very much
This seems to be a rather unexpected limitation of the ASSIGN statement. Probably worth a ticket to SAP's ABAP language group to clarify whether it's even a bug.
While this works:
ASSIGN data-some_table[ 1 ]-some_field TO FIELD-SYMBOL(<lv_source>).
the same expressed as a string doesn't:
ASSIGN (`data-some_table[ 1 ]-some_field`) TO FIELD-SYMBOL(<lv_source>).
Alternative 1 for (name) of the ABAP keyword documentation for the ASSIGN statement says that "[t]he name in name is structured in the same way as if specified directly".
However, this declaration is immediately followed by "the content of name must be the name of a data object which may contain offsets and lengths, structure component selectors, and component selectors for assigning structured data objects and attributes in classes or objects", a list that does not include the table expressions we would need here.
What is the operator or function to test whether two variables of the same custom object type refer to the same object? I've tried
If myObject = yourObject Then
But get a runtime error 438 object doesn't support this property or method. I'm guessing that's telling me to override the '=' operator to test if all the fields of the two objects have the same value. But what I want is to test whether they are the same object.
I'm guessing that's telling me to override the '=' operator to test if all the fields of the two objects have the same value.
No, it tells you the objects don't have a default property which would have been called otherwise, and the returned results compared.
You test reference equality with Is
If myObject Is yourObject Then
You need to serialize the objects somehow and then compare attribute by attribute values. The "is" operator is as dumb as it gets, it only matches if another object is the same instance assigned to the compared variable.
I suggest using a jsonStringify library. I adapted one for my DexTools.xlam open source project https://github.com/dexterial/Dextools/tree/master/Main starting from the Parsing JSON in Excel VBA post. It has much more added features since I added quite a few other excel objects serialization/hashing options and it is made using the vba test driven development that DexTools incorporates. It is still work in progress so dont expect miracles
What does dijit.registry.remove() do? How does it handle invalid parameters?
The dijit.registry reference is an instance of dijit.WidgetSet, which is a collection of widgets.
The remove() function accepts an input ID and removes that Widget with the corresponding ID from the collection, if found.
In Dojo 1.4, WidgetSet is defined within dijit/_base/manager.js.
The passed ID is used internally as the key looked in an associative array. It's used like: this._hash[id], so passing it garbage will result in nothing being found or removed.