I'm using coderush with vs 2008. coding in VB.net.
I don't see any evidence of Intellassist, all i see is the usual VS intellisense.
Is this normal? Preferred? Do most people leave the defaults or do most/some turn off vs's intellisense?
Does intellassist somehow agument intellisence?
thanks
jonathan
I see CodeRush Intellassist as an extension of Visual Studio Intellisense and not its replacement or anything else. Intellassist completes the text at the editor caret position with an in-scope identifier and may include other suggestions, such as physical file path completion or enumeration elements completion (which is not actual for Visual Basic).
To use Intellassist, just write code as you normally would. When Intellassist senses one or more suggestions matching the code you've entered so far, the best suggestion will be displayed to the right of the editor caret.
Once Intellassist is active, you have several options:
Press Enter to accept the highlighted suggestion. If you have the case-sensitive option turned off, Intellassist will ensure the entire suggestion is properly cased to match the declaration.
Press Shift+Enter to accept a portion of the suggestion. Shift+Enter accepts from the caret to the character preceding the next uppercase letter in the suggestion. For example, if "AllowMultipleSelections" was the suggestion, and "al" had been typed in, pressing Shift+Enter successive times would cause the selection to shift as follows:
Shift+Enter is useful when you need to create a new variable name that is similar to a portion of an existing suggestion, or when you want to quickly access a different but similarly-named suggestion (differing only in the latter portions of the text). You can press Shift+Enter to move the selection right, and then start typing to get other suggestions.
If more than one entry is suggested you can cycle forward and backward through the suggestions by pressing the Tab and Shift+Tab.
Press the Delete key to cancel the suggestion.
Do nothing for a few moments and Intellassist will hide the suggestion.
If the text you've entered is a code template that you want to expand, just press Space or ; to expand the template normally.
Continue typing (narrowing down the suggestion list or ultimately ignoring all suggestions).
Intellassist is highly configurable. You can specify whether case-insensitive suggestions should be made, and also change a host of other options.
Related
IntelliSense has a mode where if you hit the spacebar, it will automatically type out the suggested auto-complete word. In order to prevent this from happening, you can hit the Escape key before pressing Space. This will close the autocomplete popup, so that the suggested word is not automatically typed.
I prefer the alternative setting, where I actually have to hit the Enter key to accept the suggested autocompletion. If I just type Space, I want a space to follow the characters that I actually typed.
I know that I can toggle between the undesired mode and the second mode I describe, which I do want. To do this, I click Edit -> IntelliSence -> Toggle Completion Mode.
My problem is that this setting never sticks. It constantly reverts to the wrong mode. I'm not sure exactly when it's changing, but it seems to revert back several times a day. If I change this for one Solution, it won't apply to my other Solutions. Even if I apply it to a solution, close VS, reopen, and start working again, it will have reverted.
Does this happen to everyone else, or is this unique to me? Is there some global setting that forces this feature to stay off always? Do I have a corrupted file somewhere that's causing this?
No, this is normal behavior and this setting behaves like what you described in the previous VS versions.
However, thanks to those members who is reporting this issue and Microsoft has fixed this behavior in the latest VS2019 version.
Since VS2015 is not supported by Microsoft so far, so this behavior cannot be fixed on VS2015 and I suggest you could install the latest VS2019 Community and get what you want.
Once you click the Toggle Completion Mode under Edit-->Intellisense, no matter you close VS, create a new project or a solution, use other c# file editor, it will never revert back.
As best as I can tell, Visual Studio 2019 completely removed the ability to jump to matching brace.
I tried the hotkey I've been using for years (Ctrl-]) and it changes indent instead (why would I need that? This is C#, not Python). I also tried looking up the KeyMap (Environment->Keyboard) setting and searching for match, and there was nothing relevant. As far as I can tell, Microsoft has completely removed this feature, but I wanted to confirm that Fattie and I are not the only ones with this problem.
(for reference, here is the question for VS 2008 whose answer no longer works because the default keyboard shortcut has changed.)
EDIT: The setting still exists, but has been renamed to not contain the all-important keyword "match". See accepted answer.
The control is still there.
Go to Tools -> Options -> Environment -> Keyboard and lookup Edit.GotoBrace to see the current key combination for this feature:
You can set the key combination from the pictured menu.
just for the ones among us with non-us keyboard. On my keyboard, I need to press 'AltGr' to access "]". Therefore Ctrl+] doesn't work. Interestingly, VS has already compensated for that problem and changed the hotkey to Ctrl+`, which works nicely for me. You just need to know the hotkey has changed (depending on your keyboard).
Hope this saved a few minutes of your time ;)
Regards,
Eleusius.
On a Finnish/Swedish keyboard the Edit.GotoBrace field is mapped to Ctrl+Å
Apologies upfront if this is a silly question, but it's annoying me to no end and I can't figure it out.
I'm using Visual Studio 2013 Professional, and I usually code in C# where when using the Intellisense, when I press Enter to select a method or something it adds my selection and I can continue typing on the same line.
But at the moment I'm working on a project which is in VB.NET, and when I use the Intellisense in the same way it puts my cursor in the next line, i.e. I press Enter to select whatever, it adds my selection and starts a new line, so I have to press the Backspace to go back to the previous line. It's so annoying!
Is there a way to change this behaviour so the cursor doesn't go to the next line? I've looked at the settings available in Tools > Options but can't figure it out, and searching Google for anything similar hasn't been successful.
Found it here (paragraph List Members)
You have toggled to suggestion mode instead of completion mode.
You can also change to suggestion mode, in which only the text you type is inserted into the code. For example, if you enter an identifier that is not in the list and press TAB, in completion mode the entry would replace the typed identifier. To toggle between completion mode and suggestion mode, press CTRL+ALT+SPACEBAR or click Edit/IntelliSense/Toggle Completion Mode.
So, either use TAB/SPACEBAR (as I said in the comment) or press CTRL+ALT+SPACEBAR to switch back to completion mode.
EDIT: I've found out that whenever you type Stri (String will show highlighted in the list now) and you press . (dot) it will autocomplete and stay at the same line.
I think your way of doing this in C# isn't possible in Visual Basic.
I had the same problem and discovered that Auto list members was not enabled on my machine. It's under Tools > Options > Text Editor > Basic > General. This gave me the intellisense I was looking for.
Simple thing which can be used when you face this kind of issue is to press
tab key instead of Enter key when the IntelliSense provided me prediction list.
I have comments that gets balloon (PEP 8: Line too long ... > 120)
I wish there was a command that will wrap the lines with few keystrokes.
Right now, even if I type Alt+Enter and press enter on Reformat file, nothing actually changes. Is there a setting or plugin I could use to accomplish the formatting easily?
Under the Edit menu, there is a Fill Paragraph option, which does what I believe you want. You can assign a key command to this in Preferences, under Appearance & Behavior -> Keymap (search for "fill").
Personally, I choose first stroke Esc, second stroke Q, because that's what I've always used in Emacs...
Firstly, reformatting won't work, not in Python at least, where whitespace is important. PyCharm's "Wrap when typing reaches right margin" option is what you're looking for. Now this will not work when you copy and paste code, but in the places where it gives you trouble, just press enter, and it will work.
To be able to auto-reformat comments (and code, for that matter) to honor a right margin after the fact, go into Project Settings under Code Style and then further under Python. Click the Wrapping and Braces tab, and check the "Ensure right margin is not exceeded" checkbox.
Now if you select a region of lines and then run the Code/Reformat Code... command, PyCharm will do its best to wrap the comments or code appropriately.
You will probably have to do some tweaking of the results to suit your stylistic taste. For example, I wish PyCharm would do aggressive filling of text in block comments, at least optionally so.
PyCharm will not reformat code such that it becomes invalid Python, so sometimes it will still leave a line longer than the margin (120 or whatever you set under Project Settings/Code Style/General).
With recent PyCharm this now is located at "Editor -> Code Style", with the checkbox named "Wrap on typing"
The Screenshot shows PyCharm version 2016.2.1 Professional.
Updated Answer:
Use "soft wraps." You can search for it in the help bar.
View > Active Editor > Use Soft Wraps
It won't work for existing text or text that's copied in, but will for any newly typed text.
Back in olden times, I used to code with an editor that allowed you to mark where you were in the code with a keypress. You could jump to another point in the same or another file to check a reference or somesuch. When you were ready, you could hit another keypress and return to the point you saved.
I've long since migrated to Dreamweaver and wanted this functionality. Does it exist in DW? If so, I missed that part of the manual. If not, any suggestions on an editor that DOES have that functionality?
Scott.
There is no official way to do it, but you could use the code collapse feature to create something like a bookmark. Collapse the single line and DW will have a mark at that line number until you clear it.