I've cloned an SVN repository into git using git-svn, but I'm having trouble rebasing and I thought to work around it by using svn to generate a patch between the old SVN revision I'd used to clone my git repo in the first place and the current version. That way I could just apply the patch and call it rebased.
Any idea how I can find the SVN revision number my current git-svn clone is based on?
git svn find-rev git-svn will print what you want.
If you do git log you should be able to see a history of all commits in your repository. The first of these will correspond to the SVN revision that your git repository was cloned from.
So, you might see something like this:
commit e3223a9f72fa80b16dbe1a471c73657a4cacee3d
Author: joe <joe#31875c6e-e9e7-0310-b337-c57ebf30f660>
Date: Tue Feb 22 14:30:26 2011 +0000
PO-310: Commit message here
git-svn-id: https://svn.myrepo.com/development/trunk#51174 31875c6e-e9e7-0310-b337-c57ebf30f660
In this instance, you can see that I have cloned from revision 51174 of the remote SVN repo (fake paths and names used here)
You can simplify the output from git log by using the --skip=<number> option (e.g. git log --skip=100, though this requires you to have some idea of the number of commits since you initially cloned the repository.
Related
I am attempting to convert a SVN repository into git. The SVN repository is being actively used, while we work out the details of converting.
I followed all the guides and created an author mapping file and cloned the SVN repository.
> git svn clone https://host/svn/Project --trunk=trunk -A svn-author-map.txt
Concurrently with this switch to git, I would also like to atone for some of the sins of the SVN past (stored passwords, etc). However as soon as I alter any of the history with git filter-branch or BFG, I seem to break the ability to incorporate any updates from SVN.
> git svn fetch --fetch-all
fatal: Invalid revision range [sha from clone]..refs/remotes/trunk
Is there a way to refresh the git-svn ids to the post filter-branch ids? Or is there no going back after changing any history?
If you edit the history after conversion, then maintaining the link can become tricky.
I guess the best options are either do one-time conversion (make svn source read-only, fully switch to edited git repo), or just keep the history as is and change the leaked passwords instead.
I have an SVN project with a structure as specified below:
PROJECT > trunk, branches, tags, subproject1, subproject2, release notes
I have restructured the project through the SVN MOVE command so it looks like:
trunk, branches, Tags. (moved the folders into trunk).
I'm able to see history preserved as I moved through SVN MOVE command.
Now, I have migrated the SVN repository to GIT through below command,
$ git svn clone --stdlayout --authors-file=authors.txt file:///svnrepos/local-svn/PROJECT project.git
NOw, In the GIT repository, I am not able see the history for moved folders and it only shows me last "svn move" command history. I can see history for all other files which are not moved.
Please let me know your comments.
Thank You.
SVN Move will not be able to preserve the history while moving to GIT as it will consider as new directory entry commit in GIT.
there is require to use SVN-DUMP-RELOC which will restrcutre the directory in SVN DUMP file instead of repository.
Please follow the steps mentioned in below link for windows machine:
svn-dump-reloc use in windows command prompt
Thanks
I have an already existing git-svn repo with an ignore paths in my .config file that looks like this:
ignore-paths = ^(?!(Path1/Proj1|Path1/Proj2|Path2/Proj3))
This works well.
Someone added a new project in svn that I now need in my git repo.
If I change ignore-paths to what's below and issue a fetch or a rebase, I never see Path2/Proj4
ignore-paths = ^(?!(Path1/Proj1|Path1/Proj2|Path2/Proj3|Path2/Proj4))
In the past, I've always given up and blasted away my git repo and recreated it. Is there a better way?
After editing the ignore-paths you need to
git svn reset -r <n> -p # where <n> is the SVN revision where the new path was added.
git svn fetch
git rebase # or reset
Reference git-svn(1):
reset
Undoes the effects of fetch back to the specified revision.
This allows you to re-fetch an SVN revision. Normally the
contents of an SVN revision should never change and reset
should not be necessary. However, if SVN permissions change,
or if you alter your --ignore-paths option, a fetch may fail
with "not found in commit" (file not previously visible) or
"checksum mismatch" (missed a modification). If the problem
file cannot be ignored forever (with --ignore-paths) the only
way to repair the repo is to use reset.
Only the rev_map and refs/remotes/git-svn are changed (see
$GIT_DIR/svn/*\*/.rev_map.* in the FILES section below for details).
Follow reset with a fetch and then git reset or git rebase to
move local branches onto the new tree.
we have a central SVN repo in our company. I use git-svn on my laptop to be able to use a repo, when I'm not connected to the company network.
Now I was 3 weeks on a business trip and committed a lot to my local Git repo. There were also many commits to the SVN repo.
When I try "SVN Rebase" I have to edit conflicts in each of my Git changesets. What I would like to do is just to commit all of my local changes at once and then edit conflicts only once.
I'm fairly new to Git, so I don't know how this is done properly and if this is the best way.
I use TortoiseGit on Windows, so up to now I didn't really care about the command line.
Thanks for your help.
Once you go through conflict resolution in git-svn rebase once you are in a new tree with new commits that include your resolutions. A future git-svn rebase will not encounter the same problems (unlike repeated merges, which is where rerere comes in handy).
If by "commit all my local changes at once" you mean you want to fold all of your commits into a single commit in git (and later SVN) then you can use git rebase -i to "squash" all of your commits into a single commit. You should not include any revisions that have already been sent to SVN with dcommit in that rebase -i because you are rewriting history. You will still have to resolve conflicts when you git-svn rebase just like you would if you were using only SVN and did svn update.
I'm using git-svn. I've moved file 'A' to 'B' and I'm up to date with the svn HEAD (using git svn rebase). I can commit all other changes without problems. Now I've decided that I want to move 'B' back to 'A' and commit that change.
When I do the move and commit to my local master it works fine, but I get the following when doing a git svn dcommit:
Transaction is out of date: Out of date: 'A' in transaction '3652-1' at /opt/local/libexec/git-core/git-svn line 570
So I tried to copy and delete in a separate commit which resulted in:
Item already exists in filesystem: File already exists: filesystem '/usr/svn/db', transaction '3652-1', path 'A' at /opt/local/libexec/git-core/git-svn line 4735
I've recovered from this situation with plain svn by using the workarounds like the one described in the documentation, but I don't know how to recover with git-svn. What is going on and how do I fix it?
Removing .git/svn did not work for me. Instead, here's how I resolved:
Deleted the offending directories from the repository (But I'm not sure that this is necessary. In hindsight I think I could have skipped this step)
git svn rebase
During the rebase, there were some conflicts. For each conflict, I resolved the conflicts in text editor, then used git add <file-in-conflict> and then git rebase --continue
After rebase completed successfully, git svn dcommit ran successfully!
I can't claim to understand what's really going on under the hood in git-svn in this case (although the underlying SVN issue makes perfect sense). My usual strategy when git-svn gets confused somehow is to blow away the .git/svn metadata directory (as in this post). This almost always saves me from odd synchronization issues between the git and SVN repositories.
It happened with me when I interrupted the dcommit process.
Follow these steps to recover from error:
git svn rebase
You will get conflicts in files. Resolve the conflicts & then git add filename (in which conflict occurred) for each file.
Now do git svn dcommit. It will be pushed to remote successfully.