In my application I have integrate Three20 Library and Restkit framework, after this I am Build the code the error was generated
the error is :
`"Command /Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/llvm-gcc-4.2 failed with exit code 1"`
and the error description is
ld: duplicate symbol _OBJC_METACLASS_$_RKJSONParser in /Users/pratikkanada/Desktop/Zipogo/Zipongo - working
version/RestKit/Build/Release-iphonesimulator/libRestKitJSONParserYAJL.a(RKJSONParser+YAJL.o) and
/Users/pratikkanada/Desktop/Zipogo/Zipongo - working version/RestKit/Build/Release-
iphonesimulator/libRestKitJSONParserSBJSON.a(RKJSONParser+SBJSON.o)
so, pls tell me how to solve this error
It seems that you have added that lib two times.
Please search libRestKitJSONParserSBJSON.a and (RKJSONParser+SBJSON.o) in entire code and you may found one of these added two times.
Simply solution is remove any one of two same files.
Related
I have downloaded wxWidgets-3.0.2 and am trying to create a simple FRAME from the main program.
Unfortunately I am receiving multiple errors that are all to do with wxWidgets, NOT my code. This is odd as I am lead to believe wxWidgets should work.
Here are some of the errors I am getting:
*\msw\chkconf.h(19): Error! E080: col(10) "wxUSE_ACTIVEX must be defined."
\msw\chkconf.h(394): Error! E080: col(13) "wxUSE_DATAOBJ requires wxUSE_OLE"
\msw\chkconf.h(414): Error! E080: col(13) "wxMediaCtl requires wxActiveXContainer"
\chkconf.h(1630): Error! E080: col(13) "wxRearrangeCtrl requires wxCheckListBox"
\vector.h(197): Error! E148: col(71) access to private member 'reverse_iterator::m_ptr' is not allowed
\vector.h(187): Note! N392: col(21) definition: 'wxToolTip * * wxVector<wxToolTip *>::reverse_iterator::m_ptr'*
Why am I receiving these messages when wxWidgets is supposed to be ready to go?
Have you configured properly? If not try this link to configure on Windows. Also, you can try to use Linux. It is much easier to set up WxWidgets.
High level steps to installing wxWidgets:
Download ( you appear to have done this )
Build library ( I cannot tell if you have done this )
-OR-
Download binary built libraries if available for your compiler ( what compiler are you using - you haven't told us! )
Build one or two of the sample programs ( It really does not look like you have done this )
NOT UNTIL you have completed all these steps are you "ready to go"
I'm working on a custom TFS Build workflow based on the code found in two blogs:
http://www.theringworx.com/blog/?p=494
https://lajak.wordpress.com/2011/08/30/tfs2010-retrieve-associated-workitems-to-changesets-tfs-api/
When I implement the VB.Net code within my XAML workflow, I'm currently getting the following errors on build runtime:
The build process failed validation. Details:
Validation Error: The private implementation of activity '1:
DynamicActivity' has the following validation error: Compiler
error(s) encountered processing expression "TFSService".
Value of type
'Microsoft.TeamFoundation.VersionControl.Client.VersionControlServer'
cannot be converted to 'System.Type'.
Validation Error: The private implementation of activity '1:
DynamicActivity' has the following validation error: Compiler
error(s) encountered processing expression "TFS.GetService(Of
VersionControlServer)();".
End of expression expected.
I've traced the error down to this section of code (Simplified from XAML):
TFS=Microsoft.TeamFoundation.Client.TfsTeamProjectCollectionFactory.GetTeamProjectCollectionFactory(New Uri("MyTeamsTFSServer"))
TFSService = TFS.GetService(Of VersionControlServer)()
I've tried changing the type of TFSService from both Microsoft.TeamFoundation.VersionControl.Client.VersionControlServer and System.Type without success.
From what I can tell the error is occurring in the "Of VersionControlServer".
Has anyone ever encountered this? And if so how did you resolve it?
Turns out the issue was the URL I was using, I made a typo when I was entering it in. Yay for descriptive error messages...
I found this while I was checking my authentication using the two methods:
TFS.HasAuthenticated
TFS.Authenticate();
My code blew out when I was running the Authenticate() method.
Using Visual Studio 2008 and generating .net 2.0 framework with VB.net for a web application.
I encountered a very strange problem currently. After I build a solution and click a link in a web page, I got an error message as following. The same thing happened when I tried to run in debug mode.
*************************************** ERROR Message ******************************************************
"An exception of type 'System.InvalidCastException' occurred in Microsoft.VisualBasic.dll but was not handled in user code"
"Additional information: Operator '=' is not defined for type 'DBNull' and string "". "
*******************************************************************************************************************
The problem part is simply as below in a vb file. The value of dataview(0)(“name”) is NULL and my_name is a variable string. The strange is thing I didn't change any code in this vb file. This vb file was built previously and used for a long time ago without any problem. It just suddenly happened today. I have this syntax all over the program without causing any problem. I have tried to restore the whole solution back to original but still have the problem.
Can anyone please advise why all the sudden and how to fix?
If dataview(0)(“name”) = my_name then …
Try to determine NULL value first ..
If NOT IsDBNull(dataview(0)(“name”)) Then
If dataview(0)(“name”) = my_name then
'codes here
End If
End If
My fix engine keeps rejecting messages and I was hoping someone could help me figure out why... I'm receiving the following sample message:
8=FIXT.1.1 9=518 35=AE 34=4 1128=8 49=XXXXXXX 56=YYYYYYY 52=20130322-17:58:37 552=1 54=1 37=Z00097H4ON 11=NOREF 826=0 78=1 79=NOT SPECIFIED 80=100000.000000 5967=129776.520000 453=5 448=BCART6 452=3 447=D 448=BARX 452=1 447=D 448=BARX 452=16 447=D 448=bcart6 452=11 447=D 448=ABCDEFGHI 452=12 447=D 571=6611540 150=F 17=Z00097H4ON 32=100000.000000 38=100000.000000 15=EUR 1056=129776.520000 31=1.2977652 194=1.298120 195=-3.5480 64=20130409 63=W2 60=20130322-17:26:50 75=20130322 1057=Y 460=4 167=FOR 65=OR 55=EUR/USD 10=121
8=FIXT.1.1 9=124 35=3 34=4 49=XXXXXXX 52=20130322-17:58:37.917 56=YYYYYYY 45=4 58=Tag appears more than once 371=448 372=AE 373=13 10=216
But as you can see it's being rejected by the quickfix engine. I am using the 5.0sp1 data dictionary and have configured it in my config file:
[DEFAULT]
ConnectionType=initiator
HeartBtInt=30
ReconnectInterval=10
SocketReuseAddress=Y
FileStorePath=D:\XXX\Interface\ReutersStore
FileLogPath=D:\XXX\Interface\ReutersLog
[SESSION]
BeginString = FIXT.1.1
SenderCompID = XXXXX
TargetCompID= YYYYY
DefaultApplVerId = FIX.5.0
UseDataDictionary=Y
AppDataDictionary=FIX50SP1.xml
StartDay=sunday
StartTime=20:55:00
EndTime=06:05:00
EndDay=saturday
SocketConnectHost= A.B.C.D
SocketConnectPort= 123
Does anyone have any idea why the Engine would be rejecting this message? I know that quickfix is normally able to handle messages with repeating groups, is it a config thing? Any help would be greatly appreciated!
Your message seems to be in order. Try putting this in your config file.
ValidateFieldsOutOfOrder=N
Quickfix by default puts that as Y and the underlying structure storing the tab and field values is unable to see the count before. 453 > 448.
As a sidenote always check these fields. They should point you to the source of the problem.
58=Tag appears more than once
371=448
Maybe it's a shot in the dark, but I had a similar a problem when using a 5.0sp2 dictionary.
I resolved using an updated version of the quickfix library compiled from the library SVN repository. If I remember correctly this was the bug.
It seems that the quickfix library has not been updated since a long time, and for newer version of fix I suggest you to use the "trunk" of the repo.
I had the same problem and i resolved it by tweaking my DataDictionary like the following in message AE TradeCaptureReport
I use the following code to scan for all available WiFi-Networks:
[[CWInterface interface] scanForNetworksWithSSID:nil error:&err];
Usually I get a NSSet of Networks but sometimes I get the following error:
The operation couldn’t be completed. (com.apple.coreWLAN.error error
22.)
Error Domain=com.apple.coreWLAN.error Code=22
I haven't find anything about that error code 22. Is there a documentation or a solution for this?
Because I had another problem with CoreWlan(http://stackoverflow.com/questions/9943833/cwinterface-returning-no-data) i replaced it with Apple80211.framework.
This also is a workaround for this one...