I'm having trouble figuring out how to generate a call graph with PC-lint.
I have tried adding the -vhm flag to pc lint but nothing happens.
Can anyone tell me how to get PC-Lint to generate the call graph?
The -vh option is used to display a graph of the "Strong Type Hierarchy" and the -vm option just prints the names of source code files as they are processed. As of the current version of PC-Lint, there is no way to cause it to display a call graph although there are plenty of other tools that can do this.
Related
I'm using windows 10 and python 3.3. I tried to download fasttext_model300 to calculate soft cosine similarity between documents, but when I run my python file, it stops after arriving at this statement:
fasttext_model300 = api.load('fasttext-wiki-news-subwords-300')
There are no errors or not responding, It just stops without any reaction.
Does anybody know why it happens?
Thanks
I'd recommend against using the gensim api.load() functionality. It dynamically runs new, unversioned source code from remote servers – which is opaque in its operations & suboptimal for maintaining a secure local configuration, or debugging any issues which occur.
Instead, find the actual exact data files you trust and download them as plain data. Then, use specific library operations, like the KeyedVectors.load_word2vec_format() method, so instantiate exactly the model you need, using precise local-file paths you understand.
Following those steps may make it clearer what, if anything, is going wrong. If it doesn't, try also enabling logging at the INFO level to gather more information about what progress is made before failure (and add any new details as a comment or to your question).
python3 -m gensim.downloader --download fasttext-wiki-news-subwords-300
Try using this. Source : https://awesomeopensource.com/project/RaRe-Technologies/gensim-data
A while ago during documenting legacy code I found out there is a tool for displaying call graph (call stack) of any standard program. Absurdly I wasn't aware of this tool for years :D
It gives fancy list/hierarchy of calls of the program, though it is not a call graph in a full sense, it is very helpful in some cases.
The problem is this tool is linked only to SE93 so it can be used only for transactions.
I tried to search but didn't find any similar tool for reports or function modules. Yes, I can create a tcode for report, but for function module this approach doesn't work.
If I put FM call inside report and build a graph using this tool, it wraps this call as a single unit and does not analyze deeper. And that's it
Anybody knows a workaround how we can build graph for smth besides transaction?
The cynic in me thinks RS_CALL_HIERARCHY was left to rot. Sandra is right, it definitely used to work. Once OO came to abap, interfaces and dynamic/generic code became possible. So a call heirarchy based on static code analysis was pushing proverbial up hill.
IMO the best way to solve this is a FULL trace and then to extract the data from the trace.
There are even external tool that do that.
This is of course, still limited as running a trace on every execution path can be very time consuming. Did I hear someone say small Classes please ?
Trans SAT.
Make sure teh profile you use isnt aggregating, and measure the blocks you are interested.
Now wade you way through the trace.
https://help.sap.com/doc/saphelp_ewm93/9.3/en-US/4e/c3e66b6e391014adc9fffe4e204223/content.htm?no_cache=true
Have fun :)
The call hierarchy displays also works for programs and function modules.
In my S/4HANA system, for VA01, it displays:
Clicking the hierarchy of function module CJWI_INIT displays:
I get exactly the same result by calling the function module RS_CALL_HIERARCHY this way:
The parameter OBJECT_TYPE may have these values:
P : program
FF : function module
The "call graph" is not maintained anymore since at least Basis 4.6, and it doesn't work for classes and methods.
But the tool is buggy: in some cases, a function module containing a PERFORM at the first line, it may not be displayed, whatever the call graph is launched from SE93 or directly from RS_CALL_HIERARCHY.
I want to find my mistake in GAMS model. I don't have any errors , but my model doesn't work well
Is there any debugging tools in GAMS ?( like debugger tools in other software, e.g MATLAB)
Best
Unfortunately, I have not come across any.
If you have no errors in GAMS, it rather points to a modelling problem rather than a GAMS one. GAMS is like any other programming/modelling software, what you put in is what you get out. However, there are some commands and some intuitive ways you can find out the problem with your model:
One common way is by using the display and $stop commands. If you have loops within your GAMS code, it is best to track the progress of the loop by displaying some key variables either to your .lst file or using put utility (also a nice tool). I use the put utility, and write the code to display key variables at each point of my code to identify where things may have gone wrong.
The $stop command terminates your GAMS code at the line in which it is written.
Hope this helps.
I am new to writing intellij plugins, so I apologize in advance if my question might be a bit unclear.
I know that (live) code inspections are achieved via Annotators or LocalInspectionTools. I also know there is an API to write a custom Annotator or Inspection tool and I have seen several examples.
What I do not know (my question): is there a manager/helper/"global inspector" that can provide me with the results of an existing code annotator/inspection process (done by the IDE's plugins or by some 3rd party plugin)?
For instance: I do not want to write a custom Lint annotator/inspection plugin for WebStorm. One can configure JSLint/JSHint inside WebStorm settings. The results of the live inspection can be seen over the current file/current open editor.
I would like to get the results of this live inspection, that occurs in the current open editor (inside my own custom code). For this I am interested in the API to get this annotator/inspector and/or the results it provides.
(I apologize for maybe using annotator and inspection terms in a confusing manner)
If there is another question (which I could not find) that duplicates what I have asked above, please re-direct me.
Thank you in advance!
Andrei.
Unfortunately regular annotating process for the linters is asynchronous so you cannot get the annotation results directly (by calling 'Manager' method).
You can create instances of JSLintInspection, JSHintInspection, etc. and call #createVisitor().visit(File) method but the operation is very slow and you must call it outside of AWT thread.
Also you can try to run the method com.intellij.codeInsight.daemon.impl.DaemonCodeAnalyzerEx#processHighlights but as I mentioned above the annotation results for linters can be not available (or outdated)
When using the magic function %edit from QtConsole with IPython, the call does not block, and does not execute the saved code. It does however save a temporary file...
I think this is intended behavior due to GUI editors and uncertainty, and whatever that reason is for not being able to communicate with subprocess (pyZMQ?).
What do you suggest as the best way to mix %edit/%run magics?
I would not mind calling two different commands (one to edit, and one after I have saved and execution is safe). But those commands need a way to synchronize this target file location, or someone to persist storage, and probably need some crude form of predicatably generating filenames such that you can edit more than one file at a time, and execute in arbitrarily. Session persistence is not a must.
Would writing my own magic do any good? Hope we can %edit macros soon, that would do well enough to make it work.
you shoudl be able to do %edit filename.py and %run filename.py. The non blocking behavior is expected, and IIRC due to technical reason. Not unsurmountable but difficult.
You could define your own magic if you wish, improvement are welcomed.
Hope we can %edit macros soon, that would do well enough to make it work.
For that too, PR are welcomed. I guess as a workaround/option you can %load macro which would put macro on input n+1 , edit it and redefine it, that might be a good extension for a cell magic %%macro macroname
If you have some executable code on your input (from QtConsole), you can type
%edit 1-5
This fires the editor, creates a temporarily file (automatically managed), and loads your input lines. This is nearly enough, now how to retrieve the name of that temp file pragmatically?
I see the print statement on Stdout, but its not visible to QtConsole AFAIK. Could maybe redirect stdout to catch that line, but that may not be an option anyway if your doing something else with stdout.
If I could retrieve the full pathname that was just created, this would be cake. Store it where some magics will know how to find it. Then issue a followup command when ready,pops the name off the stack, loads it into a macro, and run. All this with 2 input commands and no names to remember (unless you want to find and use that macro again, but for 1 shot stuff...)
How do I catch or retrieve the path of that temporary file?