I've just upgraded to IntelliJ IDEA 10, and it has started doing something extremely annoying. While writing documentation in a .txt file it has started giving me word suggestions as I type. This is, instead of helping, just irritating me while also consuming system resources. I haven't been able to find a way to turn this off in the Settings window. Perhaps there's a way of telling Idea not to do this for certain file types or in code comments?
Goto
Settings/Preferences -> General -> Editor -> Code Completion
and untick Show the parameter info popup to something like 1000 (ms), then it give you time to carry on typing before the pop up.
Or disable settings such as Show suggestions as you type
For intelliJ 2016.2.2, it defaults to auto insert code suggestions which is very annoying. Even when typing space, it overrides what I'm typing and puts something random in. Here's the solution:
Go to Settings > Editor > General > Code Completion
Then, UNCHECK the box that says "Insert selected variant by typing dot, space, etc." See screenshot below
You are not alone, please watch/vote for IDEABKL-5963.
Related
I hate to ask such simple questions, but nothing I found so far helped me...
So, I've recently started using IntelliJ instead of Eclipse and there are 2 things that really bothers me...
1.) size of javadoc popup window - ok, so I finally get this little guy to pop-up whenever I need it, but it's so small I have to use scroll every single time... and that's pretty anoying when I'm working with unknown libraries...
2.) tabs == spaces - maybe some of you like this, but I don't... Eclipse was treating tabs as tabs and not spaces... I tried to change settings but with no result... or is that maybe connected with project I'm working on? (meaning, if, at the start of a project, setting were such that tabs == spaces and now changes are not applied to it)
Sorry for stupid question but, as I said, nothing I found so far helped me...
1) Just resize the window with your mouse. It will retain the size the next time it opens. You can also click on the gear icon in the upper right corner and adjust the font size. Again, it will retain the size on subsequent use.
2) I'm assuming you make the change to the "Use Tab Character" option on the "Tabs and Indents" tab for all file types and saved the Code Style. After that, you need to run the Reformat Code action (Ctrl+Alt+L or Code > Reformat Code from the menu or Reformat Code from the context menu (i.e. right-click) in The Project Tool window or Navigation Bar). IDEA retains the previous formatting (so spaces in this case) until you run a reformat on the project (or a part of it).
If you have multiple projects already created, for each one, you will need to go into File > Settings > [Project Settings] > Code Style and set the Scheme (and then do a reformat). While the Scheme definition is saved IDE wide, the scheme to use is set per project (which makes sense since an Apache Open Source project you are working on may have different code style requirements than the projects you do at work vs the ones you do for fun).
Finally, you will also want to go into File > Other Settings > Default Settings > [Template Project Settings] > Code Style and make sure your saved code style scheme (with the use tab option) is set so that new projects use that scheme when they are created.
When I type in a comment (JavaDoc or line comment) IntelliJ automatically inserts a tag when I type something like // don't and I hit the spacebar after the 't I see // don'< ></> with my cursor ready to type in the first tag. Does anyone know how to disable this behavior? I've tried google searching and searching through the settings with no avail. I'm using IntelliJ IDEA 13.0.1 community edition.
It sounds like a live template is being activated via the sequence tspace, although to the best of my knowledge this is not a default one. Go to File > Settings > [IDE Settings] > Live Templates. Search for a template that has t as its shortcut and inserts tags. Either delete it, or change its activation from space to tab (in the lower right). You may also want to check (and possibly change) the "default expand with" setting at the top.
IntelliJ IDEA has an inspection that checks for spelling. In the analysis overview, I can see how many spelling mistakes were found, e.g. 12 typos found. In the code they are highlighted using a wavy green line.
However, I find it very hard to look manually for those wavy lines. Is there a keyboard shortcut or a search function which will automatically skip to the next highlighted typo?
F2 and Shift + F2 shortcuts will navigate you to the Next / Previous highlighted error. You need to configure the error navigation first to Go to next problem instead of default Go to high priority problems option(from the context menu of editor right side bar):
See help for details. Another option is to use double click (F4 shortcut) from the Inspection Results window to go to the source.
IntelliJ IDEA 2016.3
If you want to fix all typos from the project, you can list all of them and iterate through them using double click (or F4 to open the source):
Analyze > Run Inspection by Name...
Type "Typo"
You will be able to see a list containing all typos grouped by file:
In Settings -> Editor -> Colors & Fonts -> General, you can add an 'Error stripe mark' color to Typo.
With the default settings of IntelliJ I find it difficult to spot the typos. So I do the following hack to spot and correct them once in a while.
Temporarily change inspection setting to show Typos as Errors.
IntelliJ then highlights the typos as Errors, making it much easier to spot them in the editor. I correct them and then revert the inspection setting changes. The changes can be kept permanently but I don't prefer that!
I have a file from our repository where I ran auto-indent (because it was a mess), and now the whole file is marked by blue changebars (down the right hand side of the editor window), making it difficult to find my changes.
I am already ignoring whitespace changes in the diff window (as described here: Intellij and changes tab), is there a way to also do this in the editor window?
I couldn't find a way to completely ignore whitespaces, but IntelliJ (I'm using version 2016) lets you set an option to color whitespace-only changes differentely:
Editor -> General -> Different color for lines with whitespace-only modifications
which helps tremendously.
At the moment [idea 13.5] it seems that is not possible to ignore spaces in the standard editor. You can open a support ticket
We also faced this in the company due the different codestyles used, at the end we settle for:
setting a common codestyle that everyone editing the code should [actually must] follow
reformat the whole codebase to the given codestyle
recommit the formatted code [without any addition or deletion, just the reformat]
It took just a bit of time, but at the end now we are working far better. In this way from that moment onward, we would have all the time the code that would aesthetically the same trough next versions.
You can completely disable the highlight of whitespace modified lines in :
Settings -> Editor -> Color Scheme -> VSC -> Editor Gutter -> Whitespace-modified lines
And then uncheck the background color :
Essentially, you want Intellij to use the --ignore-all-space or --ignore-space-change upon a merge.
My developer team also deals with this challenge because we have different code formatting preferences. The result is every merge is painful for no reason. The team loves being able to have their code formatting, but this negates it.
As of now there is no solution. Intellij has the technology to ignore whitespace, so fixing this is really just adding a check box on the merge diff screen or even in the version control settings.
There is a feature requests IDEA-107714
Please up vote it!
https://youtrack.jetbrains.com/issue/IDEA-107714
Try this,
View --> Active Editor --> Show whitespaces
this is guaranteed to solve your problem
I have comments that gets balloon (PEP 8: Line too long ... > 120)
I wish there was a command that will wrap the lines with few keystrokes.
Right now, even if I type Alt+Enter and press enter on Reformat file, nothing actually changes. Is there a setting or plugin I could use to accomplish the formatting easily?
Under the Edit menu, there is a Fill Paragraph option, which does what I believe you want. You can assign a key command to this in Preferences, under Appearance & Behavior -> Keymap (search for "fill").
Personally, I choose first stroke Esc, second stroke Q, because that's what I've always used in Emacs...
Firstly, reformatting won't work, not in Python at least, where whitespace is important. PyCharm's "Wrap when typing reaches right margin" option is what you're looking for. Now this will not work when you copy and paste code, but in the places where it gives you trouble, just press enter, and it will work.
To be able to auto-reformat comments (and code, for that matter) to honor a right margin after the fact, go into Project Settings under Code Style and then further under Python. Click the Wrapping and Braces tab, and check the "Ensure right margin is not exceeded" checkbox.
Now if you select a region of lines and then run the Code/Reformat Code... command, PyCharm will do its best to wrap the comments or code appropriately.
You will probably have to do some tweaking of the results to suit your stylistic taste. For example, I wish PyCharm would do aggressive filling of text in block comments, at least optionally so.
PyCharm will not reformat code such that it becomes invalid Python, so sometimes it will still leave a line longer than the margin (120 or whatever you set under Project Settings/Code Style/General).
With recent PyCharm this now is located at "Editor -> Code Style", with the checkbox named "Wrap on typing"
The Screenshot shows PyCharm version 2016.2.1 Professional.
Updated Answer:
Use "soft wraps." You can search for it in the help bar.
View > Active Editor > Use Soft Wraps
It won't work for existing text or text that's copied in, but will for any newly typed text.