I've googled around and found some topics like
http://wix.sourceforge.net/manual-wix3/run_program_after_install.htm
and
Launch application after installation complete, with UAC turned on
but, i don't use any ui. Just simple installation!
So far
<CustomAction Id="LaunchApp" Directory="INSTALLDIR" ExeCommand="[SystemFolder]cmd.exe /C MyExe.exe" />
<InstallExecuteSequence>
<RemoveExistingProducts Before="InstallInitialize" />
<Custom Action="LaunchApp" After="InstallFinalize" />
</InstallExecuteSequence>
but when i start the installer, a window pops up: "Please wait while Windows configures MyProgram". and on top of it comes cmd.exe just with a blinking cursor, when i close cmd i get message :"There is a problem with this Windows Installer package. A program required for this install to complete could not be run." Though program remains opened.
How can i do that properly (without any UI)?
Thanks in advance!
What happens if you use
ExeCommand="[SystemFolder]cmd.exe /C start MyExe.exe"
Set Return to asyncNoWait for your custom action. This way the custom action runs and the installer doesn't wait for it or check its return code.
I had the problem that it also tried to run at uninstallation.. This way it runs only on installation, reparation and updating (changing)
<CustomAction Id="LaunchApp" Directory="INSTALLFOLDER" ExeCommand="[SystemFolder]cmd.exe /C start MyFile.exe" />
<InstallExecuteSequence>
<Custom Action="LaunchApp" After="InstallFinalize">NOT REMOVE</Custom>
</InstallExecuteSequence>
Information about NOT REMOVE could be found here: https://stackoverflow.com/a/17608049/9758687
Related
I have a created msi and installed it but i am facing an issue during uninstall. I want to close the application forcefully before uninstall through custom action - wix
I've searched a lot but didn't find any solution.
I want a solution something like that.
<Property Id="QtExecCmdLine" Value='"[SystemFolder]taskkill.exe" /F /IM ConfigurationManager.exe /t'/>
<CustomAction Id="StopUserExe" BinaryKey="WixCA" DllEntry="CAQuietExec" Execute="immediate" Return="ignore"/>
<InstallExecuteSequence>
<Custom Action='StopUserExe' Before='RemoveFiles'></Custom>
</InstallExecuteSequence>
Have you tried Taskkill?
Example:
<CustomAction Id="TaskKill" Execute="deferred" ExeCommand="taskkill /f /im notepad.exe" />
In your custom action you can enumerate processes (EnumProcesses()) and call TerminateProcess() for the needed one.
This question seems to have been answered ad nauseam on this web site but I cannot get Wix to run an exe with Administrator rights (Windows 8.1 64-bit).
The installer I develop copies the prop.exe utility (http://prop.codeplex.com/) to a folder under Program Files (appfolder) as well as a file (my_file.propdesc) which needs to be registered/unregistered by prop.exe like:
prop schema register my_file.propdesc (at the end of installation)
prop schema unregister my_file (at the beginning of uninstallation)
These two command lines need to be run with Administrator privileges. Because these should also be run without a command prompt, I've used CAQuietExec with another CustomAction preparing the argument for CAQuietExec (prop.exe is 32-bit so it's CAQuietExec instead of CAQuietExec64 if I am not mistaken).
<CustomAction Id='PropReg_Prep' Property='PropReg' Value='"[appfolder]prop.exe" schema register "[appfolder]my_file.propdesc"' Execute='immediate' />
<CustomAction Id='PropUnReg_Prep' Property='PropUnReg' Value='"[appfolder]prop.exe" schema unregister "[appfolder]my_file.propdesc"' Execute='immediate' />
<CustomAction Id="PropReg" BinaryKey="WixCA" DllEntry="CAQuietExec" Execute="deferred" Return="ignore" Impersonate="no" />
<CustomAction Id="PropUnReg" BinaryKey="WixCA" DllEntry="CAQuietExec" Execute="deferred" Return="ignore" Impersonate="no" />
The custom actions are executed as per:
<InstallExecuteSequence>
<Custom Action="PropReg_Prep" After="CostFinalize" >NOT Installed</Custom>
<Custom Action="PropUnReg_Prep" After="CostFinalize" >Installed</Custom>
<Custom Action="PropUnReg" After="InstallInitialize" >Installed</Custom>
<Custom Action="PropReg" After="InstallFiles" >NOT Installed</Custom>
</InstallExecuteSequence>
I cannot get prop to register/unregister my_file.propdesc. Could someone help?
You are scheduling the actions as Execute='immediate' this runs as the user that executes the installer.
Switch to using Execute='deferred' this will run as the system account. Assuming that the prop.exe doesn't require a full profile to run this should work.
When you're not impersonating you're running with the system account, that's got admin privileges but if you are expecting it to be a user account then there might be issues.
The thing that looks weird to me is that [appfolder]prop.exe for a number of reasons. It doesn't look like a proper application folder, so make sure it's correct. It also needs to be in uppercase, making it a public property, and you should mark it Secure="yes" in the property element. The issue is that it may not get properly transferred from your immediate CA into the execute sequence where it's used.
p.s. Do the install creating a verbose log so you can see how those directory vales are actually being resolved at run time.
I'm trying to write an Installer for my Windows Service using WiX. My executable can register/unregister itself as a Windows Service using the command line parameters --install and --uninstall. This is what I came up with:
<CustomAction Id='InstallAsService' FileKey='CCWirelessServer.exe' ExeCommand='--install' Return='check' Impersonate='no' Execute='deferred' />
<CustomAction Id='InstallAsServiceRollback' FileKey='CCWirelessServer.exe' ExeCommand='--uninstall' Return='check' Impersonate='no' Execute='rollback' />
<CustomAction Id='UninstallAsService' FileKey='CCWirelessServer.exe' ExeCommand='--uninstall' Return='check' Impersonate='no' Execute='deferred' />
<InstallExecuteSequence>
<Custom Action='InstallAsService' After='InstallFiles' >NOT Installed</Custom>
<Custom Action='InstallAsServiceRollback' Before='InstallAsService' >NOT Installed</Custom>
<Custom Action='UninstallAsService' Before='RemoveFiles' >Installed</Custom>
</InstallExecuteSequence>
Both install and uninstall basically work. But during uninstall I get the following message:
The setup must update files or services that cannot be updated while the system is running. If you choose to continue, a reboot will be required to complete the setup.
Despite this error message, the service gets unregistered and the files are deleted without a reboot. To me this looks like the installer is checking if CCWirelessServer.exe is opened before it executes my custom action.
So my question is: How do I need to modify my install execute sequence so that this error message does no longer appear?
If you are developing for Windows Installer > 3.1 you can take a look at the MSIRESTARTMANAGERCONTROL-property to see if it it set properly or if other values would would stop displaying the message.
I could suppress the message using the following values:
<Property Id="MSIRESTARTMANAGERCONTROL" Value="Disable" Secure="yes" />
I need to forcefully kill a process that is running in the background before attempting to delete any files, when running an Uninstall from an MSI created with Wix. The main application consist of a trayicon which reflects the status of the bg-process monitoring local windows services (made on C#, though this may not be so relevant going further).
I first tried the following:
<File Id='FooEXE' Name='Foo.exe' Source='..\Source\bin\Release\Foo.exe' Vital='yes' />
...
<InstallExecuteSequence>
<Custom Action="CloseTray" Before="InstallValidate" />
</InstallExecuteSequence>
...
<CustomAction Id="CloseTray" ExeCommand="-exit" FileKey="FooEXE" Execute="immediate" Return="asyncWait" />
The tray icon is immediately closed after confirming application-close dialog, but the Foo.Exe task still appears on the taskmgr after the uninstall completed. Also,the following error message was given:
Thats why, then I tried this:
<InstallExecuteSequence>
<Custom Action="Foo.TaskKill" Before="InstallValidate" />
</InstallExecuteSequence>
...
<CustomAction Id="Foo.TaskKill" Impersonate="yes" Return="asyncWait" Directory="WinDir" ExeCommand="\System32\taskkill.exe /F /IM Foo.exe /T" />
After obtaining the same result, tried:
<Property Id="QtExecCmdLine" Value='"[WinDir]\System32\taskkill.exe" /F /IM Foo.exe'/>
...
<InstallExecuteSequence>
<Custom Action="MyProcess.TaskKill" Before="InstallValidate" />
</InstallExecuteSequence>
...
<CustomAction Id="MyProcess.TaskKill" BinaryKey="WixCA" DllEntry="CAQuietExec" Execute="immediate" Return="ignore"/>
Sample which I took from here: How to kill a process from WiX
lately when all else failed, I also tried this without any success:
<Wix xmlns="http://schemas.microsoft.com/wix/2006/wi" xmlns:util="http://schemas.microsoft.com/wix/UtilExtension">
...
<InstallExecuteSequence>
<Custom Action="WixCloseApplications" Before="InstallValidate" />
</InstallExecuteSequence>
...
<util:CloseApplication Id="CloseFoo" CloseMessage="yes" Description="Foo is still running!" ElevatedCloseMessage="yes" RebootPrompt="yes" Target="Foo.exe" />
This one gave me a different error:
I'm thinking on building a statue in honor to this process that just refuses to die!!! ... either that or think a problem on the application side exists, where I should add something like Application.Exit(); or Environment.Exit(0); at some line inside Program.cs.
Is there any other thing I could do at either Wix or my application to attempt closing it successfully at Uninstall?
Thanks!
Personally I think the best option for you to go with is the in-built CloseApplication method rather than your previous options.
The error you are getting for that (Error code 2762) is because you are trying to schedule the action in the immediate sequence but have the ElevatedCloseMessage="yes" set which triggers it as a deferred action. Either remove this attribute or schedule it in the deferred sequence.
Here's my wix
<Binary Id="B.RenameFiles" SourceFile="RenameFiles.bat"/>
<CustomAction Id="CA.RenameFiles" BinaryKey="B.RenameFiles"
ExeCommand="RenameFiles.bat" Execute="immediate" Return='ignore'/>
<InstallExecuteSequence>
<Custom Action="CA.RenameFiles" Before="InstallValidate"></Custom>
</InstallExecuteSequence>
This doesn't work and spits out an error in the msi log "A program required for this install to complete could not be run". I'm not really sure if this is possible or if binary is only for use with exe's and dll's etc.
The way i'm doing it at the moment is to install the bat file and then run it from there but it would be neater if I could use it as a binary instead and not install it on the local machine.
Thanks
Neil
BAT files cannot be launched directly by Windows Installer custom actions. You need a custom action which uses ShellExecute to launch your BAT.
So you can't use a BAT as a Binary custom action.
Agree with Cosmin, you cannot execute BAT from binary, however you can launch it (almost) at any time during installation with help of "CMD.exe /C " custom action, and even have it run hidden (without cmd.exe window), i.e. for deffered CA one can use:
<CustomAction Id="Set_CA_HiddenBAT" Property="CA_HiddenBAT" Value=""cmd.exe" /c "[DirectoryWhereBatFileInstalled]Your.bat"" />
<CustomAction Id="CA_HiddenBAT" BinaryKey="WixCA" DllEntry="CAQuietExec" Execute="deferred" Return="ignore" Impersonate="yes" />
Or if you want it visible:
<CustomAction Id="CA_LaunchBAT" Directory="DirectoryWhereToExecute" ExeCommand="CMD.exe /c "[DirectoryWhereBatFileInstalled]Your.bat"" Return="ignore" />
Note: Remember to run CA_HiddenBAT / CA_LaunchBAT after InstallFiles action and have added WixUtilExtension to your .wixproj:
<LinkerAdditionalOptions>-ext WixUtilExtension</LinkerAdditionalOptions>
<CompilerAdditionalOptions>-ext WixUtilExtension</CompilerAdditionalOptions>
There's also a way to launch BAT before InstallFile action, but this is tricky, let me know if you need this.