I am using SSMA to convert from an Access db to a SQL 2019 DB.
There are some things I need to fix in the access DB so I am trying to figure out whether or not these things can be done via a query in access or you have to use the goofy UI and do everything manually.
So I had a couple of questions about queries in Microsoft Access:
Can you modify the 'required' attribute on a column within a table by using a query?
Can you configure Index (dupes) on a column by using a query?
Can you change validation rules using a query?
Can you create/delete relationships using a query?
Can you change the field length of a column by using a query?
Any examples of any of these would be helpful, when I google for ms access related things all of the content is either related to Access 2007/2010 or its very UI heavy rather than Query heavy.
I am trying to script this because I may have to do this migration several times.
Update: I was able to get most of what i needed figured out..
ALTER TABLE Users ALTER COLUMN Type CHECK(In ("I","U","") Or Is Null);
Still havent found a way to change the 'ValidationRule'.. trying to change it to
In ("I","U","") Or Is Null
Look into the Data Definition Language section of the MS Access SQL Reference, specifically the ALTER TABLE statement, which will cover the majority of your questions.
For example, in response to:
Can you change the field length of a column by using a query?
ALTER TABLE Table1 ALTER COLUMN Field1 TEXT(100)
The above will change the data type of the field Field1 within table Table1 to a text field accommodating 100 characters.
On some Microsoft Access queries, I get the following message: Operation must use an updatable query. (Error 3073). I work around it by using temporary tables, but I'm wondering if there's a better way. All the tables involved have a primary key. Here's the code:
UPDATE CLOG SET CLOG.NEXTDUE = (
SELECT H1.paidthru
FROM CTRHIST as H1
WHERE H1.ACCT = clog.ACCT AND
H1.SEQNO = (
SELECT MAX(SEQNO)
FROM CTRHIST
WHERE CTRHIST.ACCT = Clog.ACCT AND
CTRHIST.AMTPAID > 0 AND
CTRHIST.DATEPAID < CLOG.UPDATED_ON
)
)
WHERE CLOG.NEXTDUE IS NULL;
Since Jet 4, all queries that have a join to a SQL statement that summarizes data will be non-updatable. You aren't using a JOIN, but the WHERE clause is exactly equivalent to a join, and thus, the Jet query optimizer treats it the same way it treats a join.
I'm afraid you're out of luck without a temp table, though maybe somebody with greater Jet SQL knowledge than I can come up with a workaround.
BTW, it might have been updatable in Jet 3.5 (Access 97), as a whole lot of queries were updatable then that became non-updatable when upgraded to Jet 4.
--
I had a similar problem where the following queries wouldn't work;
update tbl_Lot_Valuation_Details as LVD
set LVD.LGAName = (select LGA.LGA_NAME from tbl_Prop_LGA as LGA where LGA.LGA_CODE = LVD.LGCode)
where LVD.LGAName is null;
update tbl_LOT_VALUATION_DETAILS inner join tbl_prop_LGA on tbl_LOT_VALUATION_DETAILS.LGCode = tbl_prop_LGA.LGA_CODE
set tbl_LOT_VALUATION_DETAILS.LGAName = [tbl_Prop_LGA].[LGA_NAME]
where tbl_LOT_VALUATION_DETAILS.LGAName is null;
However using DLookup resolved the problem;
update tbl_Lot_Valuation_Details as LVD
set LVD.LGAName = dlookup("LGA_NAME", "tbl_Prop_LGA", "LGA_CODE="+LVD.LGCode)
where LVD.LGAName is null;
This solution was originally proposed at https://stackoverflow.com/questions/537161/sql-update-woes-in-ms-access-operation-must-use-an-updateable-query
The problem defintely relates to the use of (in this case) the max() function. Any aggregation function used during a join (e.g. to retrieve the max or min or avg value from a joined table) will cause the error. And the same applies to using subqueries instead of joins (as in the original code).
This is incredibly annoying (and unjustified!) as it is a reasonably common thing to want to do. I've also had to use temp tables to get around it (pull the aggregated value into a temp table with an insert statement, then join to this table with your update, then drop the temp table).
Glenn
There is no error in the code. But the error is Thrown because of the following reason.
- Please check weather you have given Read-write permission to MS-Access database file.
- The Database file where it is stored (say in Folder1) is read-only..?
suppose you are stored the database (MS-Access file) in read only folder, while running your application the connection is not force-fully opened. Hence change the file permission / its containing folder permission like in C:\Program files all most all c drive files been set read-only so changing this permission solves this Problem.
I know my answer is 7 years late, but here's my suggestion anyway:
When Access complains about an UPDATE query that includes a JOIN, just save the query, with RecordsetType property set to Dynaset (Inconsistent Updates).
This will sometimes allow the UPDATE to work.
Thirteen years later I face the same issue. DISTINCTROW did not solve my problem, but dlookup did.
I need to update a table from an aggregate query. As far as I understand, MS Access always assumes that de junction between the to-update table and the aggregate query is one-to-many., even though unique records are assured in the query.
The use of dlookup is:
DLOOKUP(Field, SetOfRecords, Criteria)
Field: a string that identifies the field from which the data is retrieved.
SetOfRecords: a string that identifies the set o record from which the field is retrieved, being a table name or a (saved) query name (that doesn’t require parameters).
Criteria: A string used to restrict the range of data on which the DLookup function is performed, equivalent to the WHERE clause in an SQL expression, without the word WHERE.
Remark
If more than one field meets criteria, the DLookup function returns the first occurrence. You should specify criteria that will ensure that the field value returned by the DLookup function is unique.
The query that worked for me is:
UPDATE tblTarifaDeCorretagem
SET tblTarifaDeCorretagem.ValorCorretagem =
[tblTarifaDeCorretagem].[TarifaParteFixa]+
DLookUp(
"[ParteVariável]",
"cstParteVariavelPorOrdem",
"[IdTarifaDeCorretagem] = " & [tblTarifaDeCorretagem].[IdTarifaDeCorretagem]
);
I would try building the UPDATE query in Access. I had an UPDATE query I wrote myself like
UPDATE TABLE1
SET Field1 =
(SELECT Table2.Field2
FROM Table2
WHERE Table2.UniqueIDColumn = Table1.UniqueIDColumn)
The query gave me that error you're seeing. This worked on my SQL Server though, but just like earlier answers noted, Access UPDATE syntax isn't standard syntax. However, when I rebuilt it using Access's query wizard (it used the JOIN syntax) it worked fine. Normally I'd just make the UPDATE query a passthrough to use the non-JET syntax, but one of the tables I was joining with was a local Access table.
This occurs when there is not a UNIQUE MS-ACCESS key for the table(s) being updated. (Regardless of the SQL schema).
When creating MS-Access Links to SQL tables, you are asked to specify the index (key) at link time. If this is done incorrectly, or not at all, the query against the linked table is not updatable
When linking SQL tables into Access MAKE SURE that when Access prompts you for the index (key) you use exactly what SQL uses to avoid problem(s), although specifying any unique key is all Access needs to update the table.
If you were not the person who originally linked the table, delete the linked table from MS-ACCESS (the link only gets deleted) and re-link it specifying the key properly and all will work correctly.
(A little late to the party...)
The three ways I've gotten around this problem in the past are:
Reference a text box on an open form
DSum
DLookup
I had the same issue.
My solution is to first create a table from the non updatable query and then do the update from table to table and it works.
Mine failed with a simple INSERT statement. Fixed by starting the application with 'Run as Administrator' access.
MS Access - joining tables in an update query... how to make it updatable
Open the query in design view
Click once on the link b/w tables/view
In the “properties” window, change the value for “unique records” to “yes”
Save the query as an update query and run it.
You can always write the code in VBA that updates similarly. I had this problem too, and my workaround was making a select query, with all the joins, that had all the data I was looking for to be able to update, making that a recordset and running the update query repeatedly as an update query of only the updating table, only searching the criteria you're looking for
Dim updatingItems As Recordset
Dim clientName As String
Dim tableID As String
Set updatingItems = CurrentDb.OpenRecordset("*insert SELECT SQL here*");", dbOpenDynaset)
Do Until updatingItems .EOF
clientName = updatingItems .Fields("strName")
tableID = updatingItems .Fields("ID")
DoCmd.RunSQL "UPDATE *ONLY TABLE TO UPDATE* SET *TABLE*.strClientName= '" & clientName & "' WHERE (((*TABLE*.ID)=" & tableID & "))"
updatingItems.MoveNext
Loop
I'm only doing this to about 60 records a day, doing it to a few thousand could take much longer, as the query is running from start to finish multiple times, instead of just selecting an overall group and making changes. You might need ' ' around the quotes for tableID, as it's a string, but I'm pretty sure this is what worked for me.
I kept getting the same error until I made the connecting field a unique index in both connecting tables. Only then did the query become updatable.
Philip Stilianos
In essence, while your SQL looks perfectly reasonable, Jet has never supported the SQL standard syntax for UPDATE. Instead, it uses its own proprietary syntax (different again from SQL Server's proprietary UPDATE syntax) which is very limited. Often, the only workarounds "Operation must use an updatable query" are very painful. Seriously consider switching to a more capable SQL product.
For some more details about your specific problems and some possible workarounds, see Update Query Based on Totals Query Fails.
I kept getting the same error, but all SQLs execute in Access very well.
and when I amended the permission of AccessFile.
the problem fixed!!
I give 'Network Service' account full control permission, this account if for IIS
When I got this error, it may have been because of my UPDATE syntax being wrong, but after I fixed the update query I got the same error again...so I went to the ODBC Data Source Administrator and found that my connection was read-only. After I made the connection read-write and re-connected it worked just fine.
Today in my MS-Access 2003 with an ODBC tabla pointing to a SQL Server 2000 with sa password gave me the same error.
I defined a Primary Key on the table in the SQL Server database, and the issue was gone.
There is another scenario here that would apply. A file that was checked out of Visual Source Safe, for anyone still using it, that was not given "Writeablity", either in the View option or Check Out, will also recieve this error message.
Solution is to re-acquire the file from Source Safe and apply the Writeability setting.
To further answer what DRUA referred to in his/her answer...
I develop my databases in Access 2007. My users are using access 2007 runtime. They have read permissions to a database_Front (front end) folder, and read/write permissions to the database_Back folder.
In rolling out a new database, the user did not follow the full instructions of copying the front end to their computer, and instead created a shortcut. Running the Front-end through the shortcut will create a condition where the query is not updateable because of the file write restrictions.
Copying the front end to their documents folder solves the problem.
Yes, it complicates things when the users have to get an updated version of the front-end, but at least the query works without having to resort to temp tables and such.
check your DB (Database permission) and give full permission
Go to DB folder-> right click properties->security->edit-> give full control
& Start menu ->run->type "uac" make it down (if it high)
The answer given above by iDevlop worked for me. Note that I wasn't able to find the RecordsetType property in my update query. However, I was able to find that property by changing my query to a select query, setting that property as iDevlop noted and then changing my query to an update query. This worked, no need for a temp table.
I'd have liked for this to just be a comment to what iDevlop posted so that it flowed from his solution, but I don't have a high enough score.
I solved this by adding "DISTINCTROW"
so here this would be
UPDATE DISTINCTROW CLOG SET CLOG.NEXTDUE
I got like 2000 rows of data, when I do select statement I can narrow my query but I cant change any value, as I have to change 50 columns, I dont want to use Update Command as then because values I have to update for each row is unique.
Anyone knows any easier way of selecting data using select command and then edit it.
EDIT
I just went to SQL Management studio, clicked on DB I am working on then find the table, I right clicked on it and then it says "Select top 1000 rows" so Now I can see the query and the data, I added "Where" into query and got what I wanted, but I cant modify the table rows below :S
*Edit 2 *
Or I can develop a Utility that will take Table Name , Column Name and its New value and simply updates it :)
You modify data using an UPDATE statement (with a WHERE clause) in a query window. While Management Studio has a feature called "Edit Top n Rows" that doesn't mean it's a good idea to use it - there are several behavioral bugs that are still unresolved even in the SQL Server 2012 version, and it can also place unnecessary and prohibitive locks on the underlying table.
I know it's not the answer you want to hear, but please become comfortable with proper DML commands. The documentation for UPDATE is found here:
http://msdn.microsoft.com/en-us/library/ms177523(v=sql.100).aspx
The long and short of it, IMHO: If you can identify the rows you want to update by using a SELECT with a WHERE clause, you can also write an UPDATE query using the same WHERE clause.
In SSMS - in the same place you saw "Select top 1000 rows", there should be another option "Open table" or "Edit top 200 Rows" (by default).
If you did that on a table, then pressed the following button:
You should then by able to paste in your select statement you've already written instead of what is there, press the execute button (Red exclamation mark button). The grid that appears is editable.
In general I'd be inclined to agree with #AaronBertrand though, it's better to learn the syntax to Update statements yourself.
If you have Microsoft Access, you can create a linked table to your sql server database and edit it by opening the table and modifying the relevant rows. You can create a query in Microsoft Access as well limiting the rows you want to return, and then you can inline edit the columns you'd like to change in the result set.
See for example here how to create a linked table to SQL Server.
I have not had experience in SQL queries or SQL database , so please excuse me if my terminology is wrong.
So, I have a file containing around 17,000 SQL insert statements where I enter data for 5 columns/attributes in a database. In those 17,000 statements there are only around 1200 statements which have data for all of the 5 columns/attributes while the rest have data only for 4 columns. I need to delete all those unwanted statements( which dont have data for all 5 columns).
Is there a simple way/process to do it other than going one by one and deleting? If so, it would be great if someone could help me out with it.
A different approach from my fine colleagues here would be to run the file into a staging/disposable database. Use the delete that #Rob called out in his response to pare the table down to the desired dataset. Then use an excellent, free tool like SSMS Tools Pack to reverse engineer those insert statements.
I can think of two approaches:
1: Using SQL: insert all the data and then run a query that removes any records where it does not have all of the necessary data. If the table is not currently empty, keep track of the ID where your current data "ends" so that your query can use that as a WHERE statement.
DELETE FROM myTable WHERE a IS NULL OR b IS NULL /* etc. */
2: Process the SQL file with a regular expression: Use a text editor or command line to match either "bad" records or "good" records. Most text editors have a find and replace that allows you to use regular expressions. And command line you can use grep or other tools to process. Or even a script that parses in your language of choice, for that matter.
Open file in notepad++, replace all "bad" lines using regular expressions.