I am trying to fetch an id from an oracle table. It's something like TN0001234567890345. What I want is to sort the values according to the right most 10 positions (e.g. 4567890345). I am using Oracle 11g. Is there any function to cut the rightmost 10 places in Oracle SQL?
You can use SUBSTR function as:
select substr('TN0001234567890345',-10) from dual;
Output:
4567890345
codaddict's solution works if your string is known to be at least as long as the length it is to be trimmed to. However, if you could have shorter strings (e.g. trimming to last 10 characters and one of the strings to trim is 'abc') this returns null which is likely not what you want.
Thus, here's the slightly modified version that will take rightmost 10 characters regardless of length as long as they are present:
select substr(colName, -least(length(colName), 10)) from tableName;
Another way of doing it though more tedious. Use the REVERSE and SUBSTR functions as indicated below:
SELECT REVERSE(SUBSTR(REVERSE('TN0001234567890345'), 1, 10)) FROM DUAL;
The first REVERSE function will return the string 5430987654321000NT.
The SUBSTR function will read our new string 5430987654321000NT from the first character to the tenth character which will return 5430987654.
The last REVERSE function will return our original string minus the first 8 characters i.e. 4567890345
SQL> SELECT SUBSTR('00000000123456789', -10) FROM DUAL;
Result: 0123456789
Yeah this is an old post, but it popped up in the list due to someone editing it for some reason and I was appalled that a regular expression solution was not included! So here's a solution using regex_substr in the order by clause just for an exercise in futility. The regex looks at the last 10 characters in the string:
with tbl(str) as (
select 'TN0001239567890345' from dual union
select 'TN0001234567890345' from dual
)
select str
from tbl
order by to_number(regexp_substr(str, '.{10}$'));
An assumption is made that the ID part of the string is at least 10 digits.
Related
I have a string like T_44B56T4 that I'd like to make T_B56T4. I can't use positional logic because the string could instead be TE_2BMT that I'd like to make TE_BMT.
What is the most concise Oracle SQL logic to remove the leftmost grouping on consecutive numbers from the string?
EDIT:
regex_replace is unavailable but I have LTRIM,REPLACE,SUBSTR, etc.
would this fit the bill? I am assuming there are alphanumeric characters, then underscore, and then the numbers you want to remove followed by anything.
select regexp_replace(s, '^([[:alnum:]]+)_\d*(.*)$', '\1_\2')
from (
select 'T_44B56T4' s from dual union all
select 'TXM_1JK7B' from dual
)
It uses regular expressions with matched groups.
Alphanumeric characters before underscore are matched and stored in first group, then underscore followed by 0-many digits (it will match as many digits as possible) followed by anything else that is stored in second group.
If we have a match, the string will be replaced by content of the first group followed by underscore and content of the second group.
if there is no match, the string will not be changed.
It seems that you must use standard string functions, as regular expression functions are not available to you. (Comment under Gordon Linoff's answer; it would help if you would add the same at the bottom of your original question, marked clearly as EDIT).
Also, it seems that the input will always have at least one underscore, and any digits that must be removed will always be immediately after the first underscore.
If so, here is one way you could solve it:
select s, substr(s, 1, instr(s, '_')) ||
ltrim(substr(s, instr(s, '_') + 1), '0123456789') as result
from (
select 'T_44B56T4' s from dual union all
select 'TXM_1JK7B' from dual union all
select '34_AB3_1D' from dual
)
S RESULT
--------- ------------------
T_44B56T4 T_B56T4
TXM_1JK7B TXM_JK7B
34_AB3_1D 34_AB3_1D
I added one more test string, to show that only digits immediately following the first underscore are removed; any other digits are left unchanged.
Note that this solution would very likely be faster than regexp solutions, too (assuming that matters; sometimes it does, but often it doesn't).
If I understand correctly, you can use regexp_replace():
select regexp_replace('T_44B56T4', '_[0-9]+', '_')
Here is a db<>fiddle with your two examples.
Note: Your questions says the left most grouping, but the examples all have the number following an underscore, so the underscore seems to be important.
EDIT:
If you really just want the first string of digits replaced without reference to the underscore:
select regexp_replace(code, '[0-9]+', '', 1, 1)
from (select 'T_44B56T4' as code from dual union all select 'TE_2BMT' from dual ) t
I need help with a Oracle Query
I have a query:
scenario 1: select to_char('1737388250',what format???) from dual;
expected output: 173,7388250
scenario 2: select to_char('173738825034',what format??) from dual;
expected output: 173,738825034
scenario 3: select to_char('17373882',what format??) from dual;
expected output: 173,73882
I need a query to satify all above scenarios?
Can some one help please?
It is possible to get the desired result with a customized format model given to to_char; I show one example below. However, any solution along these lines is just a hack (a solution that should work correctly in all cases, but using features of the language in ways they weren't intended to be used).
Here is one example - this will work if your "inputs" are positive integers greater than 999 (that is: at least four digits).
with
sample_data (num) as (
select 1737388250 from dual union all
select 12338 from dual
)
select num, to_char(num, rpad('fm999G', length(num) + 3, '9')) as formatted
from sample_data
;
NUM FORMATTED
---------- ------------
1737388250 173,7388250
12338 123,38
This assumes comma is the "group separator" in nls_numeric_characters; if it isn't, that can be controlled with the third argument to to_char. Note that the format modifier fm is needed so that no space is prepended to the resulting string; and the +3 in the second argument to rpad accounts for the extra characters in the format model (f, m and G).
You can try
select TO_CHAR(1737388250, '999,99999999999') from dual;
Take a look here
Your requirement is different so you can use substr and concatanation as follows:
select substr(your_number,1,3)
|| case when your_number >= 1000 then ',' end
|| substr(1737388250,4)
from dual;
Db<>fiddle
Your "number" is enclosed in single-quotes. This makes it a character string, albeit a string of only numeric characters. But a character string, nonetheless. So it makes no sense to pass a character string to TO_CHAR.
Everyone's suggestions are eliding over this and useing and using an actual number .. notice the lack of single-quotes in their code.
You say you always want a comma after the first three "numbers" (characters), which makes no sense from a numerical/mathematical sense. So just use INSTR and insert the comma:
select substr('123456789',1,3)||','||substr('123456789',4) from dual:
If the source data is actually a number, then pass it to to_char, and wrap that in substr:
select substr(to_char(123456789),1,3)||','||substr(to_char(123456789,4) from dual:
Table A
ID ID_Descr
1 'DUP 8002061286'
2 'DUP 8002082667 '
3 ' 8002082669 DUP'
I would like to extract the string from the ID_Descr field with the following conditions:
String always starts with 8
String length is always 10 digits
This means stripping everything to the right and left of the string (eg. '8002082669'). How can I achieve this? Using REGEXP_SUBSTR?
I am using Oracle 11g.
Thanks!
Although you could use regexp_substr() for this, I would take a different approach. I would just look for the '8' using instr() and then take the next 10 characters:
select substr(id_descr, instr(id_descr, '8'), 10)
This seems like the simplest solution.
You could use REGEXP_SUBSTR() but a regex is an expensive operation so you would be much better off using SUBSTR() and INSTR():
SELECT SUBSTR(ID_Descr, INSTR(ID_Descr, '8'), 10) FROM tableA;
If you really wanted to use REGEXP_SUBSTR() you could do it as follows:
SELECT REGEXP_SUBSTR(ID_Descr, '8.{9}') FROM tableA;
This would get 8 plus the following 9 characters (. being the wildcard).
Now if you wanted to match only digits, then REGEXP_SUBSTR() would probably be your best bet:
SELECT REGEXP_SUBSTR(ID_Descr, '8[0-9]{9}') FROM tableA;
I am not sure how to do this, but I have a string of data. I need to isolate a number out of the string that can vary in length. The original string also varies in length. Let me give you an example. Here is a set of the original data string:
:000000000:370765:P:000001359:::3SA70000SUPPL:3SA70000SUPPL:
:000000000:715186816:P:000001996:::H1009671:H1009671:
For these two examples, I need 3SA70000SUPPL from the first and H1009671 from the second. How would I do this using SQL? I have heard that case statements might work, but I don't see how. Please help.
This works in Oracle 11g:
with tbl as (
select ':000000000:370765:P:000001359:::3SA70000SUPPL:3SA70000SUPPL:' str from dual
union
select ':000000000:715186816:P:000001996:::H1009671:H1009671:' str from dual
)
select REGEXP_SUBSTR(str, '([^:]*)(:|$)', 1, 8, NULL, 1) data
from tbl;
Which can be described as "look at the 8th occurrence of zero or more non-colon characters that are followed by a colon or the end of the line, and return the 1st subgroup (which is the data less the colon or end of the line).
From this post: REGEX to select nth value from a list, allowing for nulls
Sorry, just saw you are using DB2. I don't know if there is an equivalent regular expression function, but maybe it will still help.
For the fun of it: SQL Fiddle
first substring gets the string at ::: and second substring retrieves the string starting from ::: to :
declare #x varchar(1024)=':000000000:715186816:P:000001996:::H1009671:H1009671:'
declare #temp varchar(1024)= SUBSTRING(#x,patindex('%:::%', #x)+3, len(#x))
SELECT SUBSTRING( #temp, 0,CHARINDEX(':', #temp, 0))
Say I have a table column that has results like:
ABC_blahblahblah
DEFGH_moreblahblahblah
IJKLMNOP_moremoremoremore
I would like to be able to write a query that selects this column from said table, but only returns the substring up to the Underscore (_) character. For example:
ABC
DEFGH
IJKLMNOP
The SUBSTRING function doesn't seem to be up to the task because it is position-based and the position of the underscore varies.
I thought about the TRIM function (the RTRIM function specifically):
SELECT RTRIM('listofchars' FROM somecolumn)
FROM sometable
But I'm not sure how I'd get this to work since it only seems to remove a certain list/set of characters and I'm really only after the characters leading up to the Underscore character.
Using a combination of SUBSTR, INSTR, and NVL (for strings without an underscore) will return what you want:
SELECT NVL(SUBSTR('ABC_blah', 0, INSTR('ABC_blah', '_')-1), 'ABC_blah') AS output
FROM DUAL
Result:
output
------
ABC
Use:
SELECT NVL(SUBSTR(t.column, 0, INSTR(t.column, '_')-1), t.column) AS output
FROM YOUR_TABLE t
Reference:
SUBSTR
INSTR
Addendum
If using Oracle10g+, you can use regex via REGEXP_SUBSTR.
This can be done using REGEXP_SUBSTR easily.
Please use
REGEXP_SUBSTR('STRING_EXAMPLE','[^_]+',1,1)
where STRING_EXAMPLE is your string.
Try:
SELECT
REGEXP_SUBSTR('STRING_EXAMPLE','[^_]+',1,1)
from dual
It will solve your problem.
You need to get the position of the first underscore (using INSTR) and then get the part of the string from 1st charecter to (pos-1) using substr.
1 select 'ABC_blahblahblah' test_string,
2 instr('ABC_blahblahblah','_',1,1) position_underscore,
3 substr('ABC_blahblahblah',1,instr('ABC_blahblahblah','_',1,1)-1) result
4* from dual
SQL> /
TEST_STRING POSITION_UNDERSCORE RES
---------------- ------------------ ---
ABC_blahblahblah 4 ABC
Instr documentation
Susbtr Documentation
SELECT REGEXP_SUBSTR('STRING_EXAMPLE','[^_]+',1,1) from dual
is the right answer, as posted by user1717270
If you use INSTR, it will give you the position for a string that assumes it contains "_" in it. What if it doesn't? Well the answer will be 0. Therefore, when you want to print the string, it will print a NULL.
Example: If you want to remove the domain from a "host.domain". In some cases you will only have the short name, i.e. "host". Most likely you would like to print "host". Well, with INSTR it will give you a NULL because it did not find any ".", i.e. it will print from 0 to 0. With REGEXP_SUBSTR you will get the right answer in all cases:
SELECT REGEXP_SUBSTR('HOST.DOMAIN','[^.]+',1,1) from dual;
HOST
and
SELECT REGEXP_SUBSTR('HOST','[^.]+',1,1) from dual;
HOST
Another possibility would be the use of REGEXP_SUBSTR.
In case if String position is not fixed then by below Select statement we can get the expected output.
Table Structure
ID VARCHAR2(100 BYTE)
CLIENT VARCHAR2(4000 BYTE)
Data-
ID CLIENT
1001 {"clientId":"con-bjp","clientName":"ABC","providerId":"SBS"}
1002
--
{"IdType":"AccountNo","Id":"XXXXXXXX3521","ToPricingId":"XXXXXXXX3521","clientId":"Test-Cust","clientName":"MFX"}
Requirement - Search ClientId string in CLIENT column and return the corresponding value. Like From "clientId":"con-bjp" --> con-bjp(Expected output)
select CLIENT,substr(substr(CLIENT,instr(CLIENT,'"clientId":"')+length('"clientId":"')),1,instr(substr(CLIENT,instr(CLIENT,'"clientId":"')+length('"clientId":"')),'"',1 )-1) cut_str from TEST_SC;
--
CLIENT cut_str
----------------------------------------------------------- ----------
{"clientId":"con-bjp","clientName":"ABC","providerId":"SBS"} con-bjp
{"IdType":"AccountNo","Id":"XXXXXXXX3521","ToPricingId":"XXXXXXXX3521","clientId":"Test-Cust","clientName":"MFX"} Test-Cust
Remember this if all your Strings in the column do not have an underscore
(...or else if null value will be the output):
SELECT COALESCE
(SUBSTR("STRING_COLUMN" , 0, INSTR("STRING_COLUMN", '_')-1),
"STRING_COLUMN")
AS OUTPUT FROM DUAL
To find any sub-string from large string:
string_value:=('This is String,Please search string 'Ple');
Then to find the string 'Ple' from String_value we can do as:
select substr(string_value,instr(string_value,'Ple'),length('Ple')) from dual;
You will find result: Ple