I need help with a query. Consider the following table:
I need to select first the sum of each Code from table. I am doing it with simple sum and group by statement. Then I have to subtract the results from each code sum where type='r'
1) Say for first part of query, we will get 2 rows from SUM (one with total USD and one with total YEN)
2) Now I need to subtract from these results the corresponding USD, YEN value which has Type='r'
I have to do it inside SQL and not a stored procedure.
Why not use a WHERE statement to say WHERE Type != 'r' so that those values never even get added to sum in the first place...
SELECT `Code`, SUM(`Amount`) AS `Total`
FROM `Table`
WHERE `Type` != 'r'
GROUP
BY `Code`;
Something like that.
select code, l.amount - r.amount
from
(select code, sum(amount) as amount from my_table group by code) l
left join (select code, sum(amount) as amount from my_table where type = 'r' group by code) r
on l.code = r.code
You can do this in a single, simple query:
select
code,
sum(case when type = 'r' then (-1 * amount) else amount end) as sum
from
yourtable
group by
code
Basically, you're changing the sign of the rows that have type = 'r', so when you sum all rows for a particular code you'll get the correct answer.
Does it have to be a single query?
I'd say SUM the total, then SUM the subcategory where Type='r', then subtract one from the other.
You could do this in one line of SQL, but I'm pretty sure it would be either joining the table with itself or using a subquery. Either way, it's doing the same amount of work as the above.
Try:
select code,
sum(amount) gross_total,
sum(case when type = 'r' then amount else 0 end) type_r_total,
sum(case when type != 'r' then amount else 0 end) net_total
from yourtable
group by code;
to see the overall totals, type R only totals and non-type R totals for each currency on one row per currency, in a single pass.
Related
I have a query like:
select nvl(nvl(sum(a.quantity),0)-nvl(cc.quantityCor,0),0)
from RCV_TRANSACTIONS a
LEFT JOIN (select c.shipment_line_id,c.oe_order_line_id,nvl(sum(c.quantity),0) quantityCor
from RCV_TRANSACTIONS c
where c.TRANSACTION_TYPE='CORRECT'
group by c.shipment_line_id,c.oe_order_line_id) cc on (a.shipment_line_id=cc.shipment_line_id and a.shipment_line_id=7085740)
where a.transaction_type='DELIVER'
and a.shipment_line_id=7085740
group by nvl(cc.quantityCor,0);
The query runs OK, but returns no value. I want it to return 0 if there is no quantity found. Where have I gone wrong?
An aggregation query with a GROUP BY returns no rows if all rows are filtered out.
An aggregation query with no GROUP BY always returns one row, even if all rows are filtered out.
So, just remove the GROUP BY. And change the SELECT to:
select coalesce(sum(a.quantity), 0) - coalesce(max(cc.quantityCor), 0)
I may be wrong, but it seems you merely want to subtract CORRECT quantity from DELIVER quantity for shipment 7085740. You don't need a complicated query for that. Especially your GROUP BY clauses make no sense if that is what you are after.
One way to write this query would be:
select
sum(case when transaction_type = 'DELIVER' then quantity else 0 end) -
sum(case when transaction_type = 'CORRECT' then quantity else 0 end) as diff
from rcv_transactions
where shipment_line_id = 7085740;
I had a query like this and was trying to return 'X' when the item is not valid.
SELECT case when segment1 is not null then segment1 else 'X' end
--INTO v_orgValidItem
FROM mtl_system_items_b
WHERE segment1='1676001000'--'Jul-00'--l_item
and organization_id=168;
..but it was returning NULL.
Changed to use aggregation with no group by and now it returns 'X' when the item is not valid.
SELECT case when max(segment1) is not null then max(segment1) else 'X' end valid
--INTO v_orgValidItem
FROM mtl_system_items_b
WHERE segment1='1676001000'--'Jul-00'--l_item
and organization_id=168;--l_ship_to_organization_id_pb;
Here is another example, proving the order of operations really matters.
When there is no match for this quote number, this query returns NULL:
SELECT MAX(NVL(QUOTE_VENDOR_QUOTE_NUMBER,0))
FROM PO_HEADERS_ALL
WHERE QUOTE_VENDOR_QUOTE_NUMBER='foo.bar';
..reversing the order of MAX and NVL makes all the difference. This query returns the NULL value condition:
SELECT NVL(MAX(QUOTE_VENDOR_QUOTE_NUMBER),0)
FROM PO_HEADERS_ALL
WHERE QUOTE_VENDOR_QUOTE_NUMBER='foo.bar';
I have a table that has some duplicates. I can count the distinct records to get the Total Volume. When I try to Sum when the CompTia Code is B92 and run distinct is still counts the dupes.
Here is the query:
select
a.repair_week_period,
count(distinct a.notif_id) as Total_Volume,
sum(distinct case when a.header_comptia_cd = 'B92' then 1 else 0 end) as B92_Sum
FROM artemis_biz_app.aca_service_event a
where a.Sales_Org_Cd = '8210'
and a.notif_creation_dt >= current_date - 180
group by 1
order by 1
;
Is There a way to only SUM the distinct records for B92?
I also tried inner joining the table on itself by selecting the distinct notification id and joining on that notification id, but still getting wrong sum counts.
Thanks!
Your B92_Sum currently returns either NULL, 1 or 2, this is definitely no sum.
To sum distinct values you need something like
sum(distinct case when a.header_comptia_cd = 'B92' then column_to_sum else 0 end)
If this column_to_sum is actually the notif_id you get a conditional count but not a sum.
Otherwise the distinct might remove too many vales and then you probably need a Derived Table where you remove duplicates before aggregation:
select
repair_week_period,
--no more distinct needed
count(a.notif_id) as Total_Volume,
sum(case when a.header_comptia_cd = 'B92' then column_to_sum else 0 end) as B92_Sum
FROM
(
select repair_week_period,
notif_id
header_comptia_cd,
column_to_sum
from artemis_biz_app.aca_service_event
where a.Sales_Org_Cd = '8210'
and a.notif_creation_dt >= current_date - 180
-- only onw row per notif_id
qualify row_number() over (partition by notif_id order by ???) = 1
) a
group by 1
order by 1
;
#dnoeth It seems the solution to my problem was not to SUM the data, but to count distinct it.
This is how I resolved my problem:
count(distinct case when a.header_comptia_cd = 'B92' then a.notif_id else NULL end) as B92_Sum
I have two tables, an Orders table which contains a list of a users orders and a OrderShippingCosts table which contains a price for shipping each item based on the OrderTypeID in the Orders table.
I am running a query like below to calculate the total shipping costs:
SELECT
SUM(CASE
WHEN OR.OrderTypeID = 1
THEN (SELECT CostOfShippingSmallParcel
FROM OrderShippingCosts)
ELSE (SELECT CostOfShippingBigParcel
FROM OrderShippingCosts)
END) AS TotalShippingCost
FROM
Orders AS OR
But I'm getting the following error:
Cannot perform an aggregate function on an expression containing an aggregate or a subquery
Does anyone know what is wrong with my query?
Function SUM takes an expression on input, which evaluates into single data value, not a dataset. Expression definition from MSDN:
Is a combination of symbols and operators that the SQL Server Database Engine evaluates to obtain a single data value.
You trying to pass to SUM function a dataset (which is result of subquery), not a single data value. This is simplification of what you trying to query:
SELECT SUM(SELECT Number FROM SomeTable)
It is not valid. The valid query would be:
SELECT SUM(Value) FROM SomeTable
In your particular case looks like you missing JOIN. Your original logic will result in summary of entire OrderShippingCosts table for each row of Orders table. I think, it should be something like this:
SELECT
SUM
(
CASE
WHEN ord.OrderTypeID = 1 THEN ship.CostOfShippingSmallParcel
ELSE ship.CostOfShippingBigParcel
END
) TotalShippingCost
FROM Orders AS ord
JOIN OrderShippingCosts ship ON /* your search condition, e.g.: ord.OrderID = ship.OrderID */
By the way, it is not a good idea to use reserved symbols as aliases, names and so on. In your query you use OR as alias for Orders table. Symbol OR is reserved for logical or operation. If you really need to use reserved symbol, wrap it into [ and ] square braces. Look here and here for more details.
The error message is clear, you can avoid it with a join:
SELECT
SUM(CASE WHEN [OR].OrderTypeID = 1
THEN CostOfShippingSmallParcel
ELSE CostOfShippingBigParcel END) AS TotalShippingCost
FROM Orders [OR]
CROSS JOIN OrderShippingCosts
You can try like this...
SELECT
CASE WHEN OR.OrderTypeID = 1
THEN (SELECT SUM(CostOfShippingSmallParcel) FROM OrderShippingCosts)
ELSE (SELECT SUM(CostOfShippingBigParcel) FROM OrderShippingCosts) END AS TotalShippingCost
FROM Orders AS OR
Let me know
select sum (or.TotalShippingCost)
FROM
SELECT
(CASE WHEN OR.OrderTypeID = 1
THEN (SELECT CostOfShippingSmallParcel FROM OrderShippingCosts)
ELSE (SELECT CostOfShippingBigParcel FROM OrderShippingCosts) END) AS TotalShippingCost
FROM Orders AS OR
Try this
SELECT
ISNULL
(
SUM
(
CASE
WHEN O.OrderTypeID = 1 THEN C.CostOfShippingSmallParcel
ELSE C.CostOfShippingBigParcel END
), 0
) AS TotalShippingCost
FROM
Orders AS O LEFT JOIN
OrderShippingCosts C ON O.Id = C.OrderId -- Your releation id
Within SQL is it possible to select a column only if it meets my Criteria?
IF p.Amount != 0.0
{ select p.Amount from Price p }
This is part of a much larger SQL will be used to filter the column from being displayed if there are values over 0.0
SQL criteria are used to select rows, not columns. I have generally found it makes life easier to always select the same columns for a specific query, and later choose whether or not to display them using view logic.
You need to use the CASE statement. Transact-SQL - CASE
USE AdventureWorks2012;
GO
SELECT ProductNumber, Category =
CASE ProductLine
WHEN 'R' THEN 'Road'
WHEN 'M' THEN 'Mountain'
WHEN 'T' THEN 'Touring'
WHEN 'S' THEN 'Other sale items'
ELSE 'Not for sale'
END,
Name
FROM Production.Product
ORDER BY ProductNumber;
GO
Do you want it to not be visible at all? Or just display some other predefined value inside it?
Because if you want the column to not appear at all, but only in some cases, that can not be done.
However, you can return a different result in the column, should it suffice for you. Use CASE WHEN:
SELECT
CASE WHEN p.amount< 700 THEN p.amount
ELSE 0
END
FROM Price p;
If you only want to show values greater than 0.0, you can use a where clause:
select p.amount
from t
where p.amount > 0
If you want non-positive values to be shown, and blanks (NULLs) for the rest, then do:
select (case when p.amount > 0 then p.amount end)
from t
If you only want rows returns when all values are greater then zero, then here is one way:
select p.amount
from (select t.*,
sum(case when p.amount > 0 then 1 else 0 end) over () as Pgt0
count(*) over () as cnt
from t
) t
where Pgt0 = cnt
If you actually want to remove the column when, say, all the values are the same, then you need a more complicated expression. SQL SELECT queries define the columns and don't have dynamically configurable columns.
You can use IFF function in SQL Server:
SELECT IIF(p.Amount != 0.0 ) as amount
FROM price p
I'll try to describe as best I can, but it's hard for me to wrap my whole head around this problem let alone describe it....
I am trying to select multiple results in one query to display the current status of a database. I have the first column as one type of record, and the second column as a sub-category of the first column. The subcategory is then linked to more records underneath that, distinguished by status, forming several more columns. I need to display every main-category/subcategory combination, and then the count of how many of each sub-status there are beneath that subcategory in the subsequent columns. I've got it so that I can display the unique combinations, but I'm not sure how to nest the select statements so that I can select the count of a completely different table from the main query. My problem lies in that to display the main category and sub category, I can pull from one table, but I need to count from a different table. Any ideas on the matter would be greatly appreciated
Here's what I have. The count statements would be replaced with the count of each status:
SELECT wave_num "WAVE NUMBER",
int_tasktype "INT / TaskType",
COUNT (1) total,
COUNT (1) "LOCKED/DISABLED",
COUNT (1) released,
COUNT (1) "PARTIALLY ASSEMBLED",
COUNT (1) assembled
FROM (SELECT DISTINCT
(t.invn_need_type || ' / ' || s.code_desc) int_tasktype,
t.task_genrtn_ref_nbr wave_num
FROM sys_code s, task_hdr t
WHERE t.task_genrtn_ref_nbr IN
(SELECT ship_wave_nbr
FROM ship_wave_parm
WHERE TRUNC (create_date_time) LIKE SYSDATE - 7)
AND s.code_type = '590'
AND s.rec_type = 'S'
AND s.code_id = t.task_type),
ship_wave_parm swp
GROUP BY wave_num, int_tasktype
ORDER BY wave_num
Image here: http://i.imgur.com/JX334.png
Guessing a bit,both regarding your problem and Oracle (which I've - unfortunately - never used), hopefully it will give you some ideas. Sorry for completely messing up the way you write SQL, SELECT ... FROM (SELECT ... WHERE ... IN (SELECT ...)) simply confuses me, so I have to restructure:
with tmp(int_tasktype, wave_num) as
(select distinct (t.invn_need_type || ' / ' || s.code_desc), t.task_genrtn_ref_nbr
from sys_code s
join task_hdr t
on s.code_id = t.task_type
where s.code_type = '590'
and s.rec_type = 'S'
and exists(select 1 from ship_wave_parm p
where t.task_genrtn_ref_nbr = p.ship_wave_nbr
and trunc(p.create_date_time) = sysdate - 7))
select t.wave_num "WAVE NUMBER", t.int_tasktype "INT / TaskType",
count(*) TOTAL,
sum(case when sst.sub_status = 'LOCKED' then 1 end) "LOCKED/DISABLED",
sum(case when sst.sub_status = 'RELEASED' then 1 end) RELEASED,
sum(case when sst.sub_status = 'PARTIAL' then 1 end) "PARTIALLY ASSEMBLED",
sum(case when sst.sub_status = 'ASSEMBLED' then 1 end) ASSEMBLED
from tmp t
join sub_status_table sst
on t.wave_num = sst.wave_num
group by t.wave_num, t.int_tasktype
order by t.wave_num
As you notice, I don't know anything about the table with the substatuses.
You can use inner join, grouping and count to get your result:
suppose tables are as follow :
cat (1)--->(n) subcat (1)----->(n) subcat_detail.
so the query would be :
select cat.title cat_title ,subcat.title subcat_title ,count(*) as cnt from
cat inner join sub_cat on cat.id=subcat.cat_id
inner join subcat_detail on subcat.ID=am.subcat_detail_id
group by cat.title,subcat.title
Generally when you need different counts, you need to use the CASE statment.
select count(*) as total
, case when field1 = "test' then 1 else 0 end as testcount
, case when field2 = 'yes' then 1 else 0 endas field2count
FROM table1