I developed an application for a local company that required printing a chart and some data. I made the program on a Windows 7 machine using the PrintForm control. It printed just fine and I sent it to the company, but they are running it on WindowsXP and the program is crashing. I assumed that PrintForm would work on all Win operating systems but apparently that is not the case?
If there is something special that needs to be done to get PrintForm to work on XP that would be fine (downloading a lib file or something), but otherwise what is the best way to print out a VB.NET form on Windows XP?
Thank you!
My guess is they don't have the Microsoft.VisualBasic.PowerPacks.VS.dll on their PC's. You need that to be included in your deployment project so they can call PrintForm.
I don't think this is unique to XP though. According to MS, this has been a feature ported from the early VB days.
Related
We are getting a application failed to initialize error 0xc000007b. I looked around it seems to maybe be the .NET framework, I also read a possible virus.
Our application is Visual Basic .NET 2010, running on Windows XP, Windows Update is turned on.
What fixes the problem, seems to be temporary, is take my backup copy of the .exe and replace the .exe on the machine, it runs for a few hours. Keep in mind I am 12 hours away or more from the machine, I remote to it using TeamViewer.
Will event viewer or something else give me a better idea of what happened? or more information about the error and it's cause?
I'm far from a Visual Basic guru, so I'm very puzzled as to why this application is throwing this error after running for approximately 2 years.
Can windows update cause this? Does .NET framework update itself automatically?
Thanks for any help.
Well if your program was not recompiled, I'd doubt it's the program itself, but if you have the source code you can try running it through the debugger to see what's going on, and where. Personally I'd try just reimaging your xp system and seeing if that fixes the issue.
Also, isn't xp out of support? I suppose windows updates could affect it. I've seen updates cause older applications to break, so it is a possibility. You can look at the recent updates and roll them back.
I'm using the Crystal Report 10 viewer ActiveX control in an Access App I've written. Works great in Office 2003 on 32bit versions of Windows. The problem arrises when I try to run the program in 64 bit Windows (with 32bit Office). I get the following error:
Run-time error '429': ActiveX component can't create object
I get this error on the following line of my VBA code.
Set rdApp = CreateObject("Crystalruntime.application.10")
How can I get this to work in 64bit?
I don't have any specific experience with Crystal Report, but I do have some experience with installing components on a 64-bit Windows environment that were intended for 32-bit Windows, so here are some general suggestions of things to try:
Before installing, try loosening the security privileges - I have Windows Server 2008; on this OS, they're under Start | Administrative Tools | Local Security Policy. Many old installers are thwarted by these controls. You'll want to return them to their defaults after the install.
Make sure that you run the installer with admin privileges (right-click; run as Administrator).
Examine the installation log for Crystal Report - it may indicate a failure registering a component. In one instance, I was able to get the installation working by running the command to register the failed component manually, on an administrator-privileged command line (the command was in the log).
If acceptable, try to create a Windows Virtual Machine running a virtual Windows XP, and try the installations there (this might be a bit tedious, due to your need for MS Office).
Take a look at VMWare's ThinApp - this is intended for packaging applications for administrators, but this was the solution we ended up using to shield one of our 32-bit apps from Windows 64-bit perils
Hope this helps; we struggled for awhile trying different things to get our legacy apps working on a 64-bit environment.
i have a simple app of one form.
on this form there is:
webbrowser -
axshockwavecontrol -
combobox -
label -
progressbar
the code is not so much of a work so it is not neccessary to explain it.
all the problem is that the app is working perfectly on my computer but it is not working on other computers
* on windows xp it is not opening and crashes with the "send and don't send error"
* on windows 7 the cursor is loading for a couple of seconds and nothing happen.
i don't know where to search but there is nothing so special in the application except for the shockwave control.
Did you check the availability of the .Net Framework in the computer? If you don't have installers of the frameworks, you can simply download here: http://www.microsoft.com/net/download
I've had similar issues, solutions were:
Make sure the latest Flash plugin is installed on the target system.
Compile the app and all related assemblies as "x86" (instead of "Any CPU").
I would like to run a .exe file made with visual studio 2003 but I get an error every time I run it on a windows 7 machine, vista machine, and xp machine. The error on Windows 7 and vista says "application has stopped working" and then makes me close the error box.
In windows xp it's a little different error, "the application failed to operate (0xc0000135) Click on OK to terminate the application."
That error code seems to indicate the application failed to initialize correctly.
It is possible that the anticipated .NET version is not present.
As far as I know, VS 2003 by default compiles against the .NET 1.1 library. There is no straightforward way of installing this on a Windows 7 or Vista box. Do you need to compile it against the .NET 1.1 library, or can you load it in VS2005, change the output .net version to 2.0 or higher, and recompile the application?
If you have the source code to the application, try running the application in debug mode and stepping through line by line until you find the exception. If you do not have the source code, possibly try running the application in a couple different compatibility modes. Another option to try is to check the windows event log for anything more specific.
If you want to get really deep into it, you can use SysInternals ProcMon.exe and filter on the failing exe to view the WinAPI calls that are happening during the failure.
Also, a basic search of forums shows that error is usually accompanied with framework issues. Either recompile the application or check out what your required framework is in the VS2003 project settings.
My company has a VB6 application using Crystal Reports 7 which a client has asked to be installed on Windows 7 32 bit. It is currently installed on Windows XP 32bit SP2 machines at the client. Connection to the DB is done via ODBC to SQL Server 2000 instance on another server.
On Windows 7, the installation works fine, however when you try to open the application, the error is given.
I have looked at the following:
Registering all the dll's and ocx files using regsvr32. Some will not register as they either are registered already or the following message is given "Make sure that "[name].dll" is valid DLL or OCX file and then try again." I read this forum thread regarding this: http://social.msdn.microsoft.com/forums/en-US/vblanguage/thread/0653f685-4526-45d9-89f3-8c479a6b4c62
Monitored the opening of the application using a ProcessMonitor application to try and spot if there is a missing dll or ocx file - this does not seem to be the case.
Reviewed the application according to this list and nothing seems to be against these guidelines
I've noticed two items in the knowledge base that relate to this
http://support.microsoft.com/kb/281848 - the comdlg32.ocx bundled with the application is version 6.0.81.69 and the one in the system32 folder on the dev machine (WinXP 32 bit) is 6.1.97.82. However if this was the issue then surely it would not work currently?
http://support.microsoft.com/kb/184898 - I'm not sure how to confirm that this is the issue
Finally, due to complexities, I am not allowed to make code changes to this application. Even if I was, I'm not a VB6 programmer, just the guy who got the terribly support project! If code changes are required, then I'll have to investigate using WinXP mode.
Update: I get the same error in XP Mode. That's a Win XP with SP3 VM. This runs on a Win XP SP2 VM, is there potentially something in SP3 that would have caused this to occur? Or is it just a fact of it being XP Mode?
I got the same error but I solved by using regsvr32.exe in C:\Windows\SysWOW64.
Because we use x64 system. So if your machine is also x64, the ocx/dll must registered also with regsvr32 x64 version
The file msrdo20.dll is missing from the installation.
According to the Support Statement for Visual Basic 6.0 on Windows Vista, Windows Server 2008 and Windows 7 this file should be distributed with the application.
I'm not sure why it isn't, but my solution is to place the file somewhere on the machine, and register it using regsvr32 in the command line, eg:
regsvr32 c:\windows\system32\msrdo20.dll
In an ideal world you would package this up with the redistributable.
This download fixed my VB6 EXE and Access 2016 (using ACEDAO.DLL) run-time error 429. Took me 2 long days to get it resolved because there are so many causes of 429.
http://www.microsoft.com/en-ca/download/details.aspx?id=13255
QUOTE from link:
"This download will install a set of components that can be used to facilitate transfer of data between 2010 Microsoft Office System files and non-Microsoft Office applications"
You say it works once you install the VB6 IDE so the problem is likely to be that the components you are trying to use depend on the VB6 runtime being installed.
The VB6 runtime isn't installed on Windows by default.
Installing the IDE is one way to get the runtime. For non-developer machines, a "redistributable" installer package from Microsoft should be used instead.
Here is one VB6 runtime installer from Microsoft. I'm not sure if it will be the right version for your components:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=7b9ba261-7a9c-43e7-9117-f673077ffb3c