I'm using a Objective-C Scripting Bridge to communicate with InDesign CS3/CS4. Unfortunately I'm stuck on Save command which appears to be existing only as a part of the standard suite and not defined again in InDesign. Because of that it looks like I can Save, Save as but not Save Copy a document. Does anyone have any idea how to proceed?
Just to shortly explain the difference between Save and Save Copy - using Save Copy the current doc doesn't change which is opposite to Save or Save as.
the only other alternative other than that which philip-regan suggests. Would be to use GUI scripting but I'm still not sure what the point would be. If you wanted to save time of not closing and reopening you could save the doc make a duplicate via the finder and continue onward in indesgn with out the close and re-open bit
I always thought the distinction between Save As and Save Copy as being more semantic than anything because all that command is really doing is performing a Save As but appending the file name with " copy" (e.g., "MyLayout.indd" becomes "MyLayout copy.indd"). Just use Save as a Save Copy alternative by giving an alternate name for the document when you save it.
Edit per OP's comments: You're right that Save Copy isn't defined in the dictionary. The only way I see around this is to mimic the command's behavior by saving to a location with a new name, closing the current-yet-renamed document, and reopening the original. Not ideal, I know, but I don't see another way around it, unless Save Copy is defined in the Javascript API, which I doubt.
Well,
since Save Copy is not defined in the scripting dictionary, the only way how to proceed is to save current document a create a copy via Finder.
If you search the header file for InDesign, these are the methods that pop up:
- (InDesignDocument *) saveTo:(id)to stationery:(BOOL)stationery versionComments:(NSString *)versionComments forceSave:(BOOL)forceSave; // Save the document
- (void) saveACopyTo:(id)to stationery:(BOOL)stationery; // Saves a copy of the document.
Related
I am trying to save a pdf which opens via Web link and after saving want to read all texts present in the PDF file.
I have tried to save it by sending "send keys" (CTRL+SHIFT+S) as used in BP but was not able to save it.
Also, for reading the data present in PDF(any other pdf) tried with sending key strokes CTRL+A and CTRL+C but was not successful.
Theoretically, (if you haven't done this already) you could create an object + model that attaches to the open (running).pdf instance, then with the spied element of save button/option in your .pdf, proceed from there with further elements/clicks to save it wherever you want. This should be a few clicks using Navigate stages. Same principle if you are using sendkeys; you still need to use the root element on the model that attaches/launches the .pdf. If you haven't done this, the sendkeys are just never going to work. As to capturing the contents, I am not aware of any downloadable VBOs that will do this, I know there are some from MS Word to capture stuff in tables, etc... into a Collection stage, but not for .pdf. You can try the sendkeys again once you are sure you are using the root element of the correct model, or you might have a go at creating your own solution using a code stage.
So I'm making a powerpoint game, and I want there to be a save feature. I remember seeing a save function while browsing through the commands but I don't remember what to do. Does anyone know how to save a powerpoint file with a simple line of code? it can't be that complicated.
You want the Save method of the presentation object:
Application.ActivePresentation.Save
You can find methods using the search box in the Object Browser:
I'm using the following the code to open a file that resides elsewhere on the computer:
System.Diagnostics.Process.Start(PathToOpen)
Where PathToOpen is the full address to the file I wish to open. This appears to work as intended for any file type that has an application installed that can open the file.
Whilst this works OK, if the file is on a networked drive, I want my VB.Net code to check if the file is currently in use, if so display a message. Currently what happens is if a second user tries to open the file, it opens read-only (a word file for example) which is handled outside of my application. I want to intercept before the file is opened and stop the process there.
Is this possible at all?
You are basically asking if it's possible to monitor files on a system that doesn't even belong to you ?
Word does know about a file already in use because it creates a hidden file next to the one you open. if there is already a hidden file, it means the file is already in use.
Other applications use different ways of knowing if a file they can use is already opened somewhere else.
In order to do what you want to do, you need to know how all the applications handle this problem...
A possible solution would be for you to create a small hidden file next to the file the user wants to open (just like MS Word does). Only problem, you need to destroy the file when it's closed by the user, and you have no way of knowing that...
this time I'm fighting against a .txt file which doesn't want to be (programmatically) set to be printed in Portrait-mode instead of Landscape-mode (which is the default apparently).
Thing is I know how to do that with application like Word or Excel, but sadly enough I'm working on a device that has no Office at all.
I'm not providing any code at all since my problem is pretty straightforward, and I think I need a simple command in order to solve it. What I basically (programmatically) do in my subroutine is:
Open the file as #1 (I know this appears so '80, but I don't want to modify an up-and-running system, potentially having errors show up)
Write text to the file
Close #1
Save the file
Call text editor shell to show the file to the user
How can I then automatically set the print format to Portrait?
P.s.= I do not have the possibility to insert a userform or an object to print the txt file in "special ways", the user has to print the file from txt editor itself (wordpad just in case)
First to state the obvious: there are no print settings stored in text files (or indeed anything else except for the text). Print settings would be controlled within whatever you are using to print - in this case Notepad or Wordpad.
There are only very limited command line switches for Notepad and Wordpad, which unfortunately don't include page setup. In theory you may be able to automate setting portrait using SendKeys (see here and here) but if it is possible at all it's likely to be difficult and unreliable (focus and timing are two issues).
I can't see a good way round this within the parameters of your question. Adding an object within your application would probably have been the best solution. You might try looking for an alternative text editor you could install that is easier to automate. The only other alternative might be to set defaults within the printer drivers and hope that those stick when the user opens Notepad.
I'm using Excel 2010. I have some code in background (VBA) that is growing up from time to time. I'm trying to find a way to separate the source code from the xls file, so I could compare the code changes. In other words, I want that the code will be in a textual file, and every time I'll open the Excel file, the source code for macros will be taken from this file.
Thanks in advance!
Take a look at this question on SO.
It has the mention of addin called SourceTools, that I have used & find it worthwhile.
Also, it comes with source code so it can be modified to point it to the source code control software (such as SVN) that is specific to your use.
Feel free to close this question as the link I gave has the same question as yours & answers what I suppose you are looking for.
Have a look at the various code cleaner apps/code available for VBA, such as:
http://www.appspro.com/Utilities/CodeCleaner.htm
Among other things, these export the modules/forms/classes to text files, delete them, then re-insert them into your projects.
With a few mods, that'll form the basis for what you're after.
Another possibility: I don't do much in Excel, but if its add-ins behave like those in PowerPoint, that might help also. In PPT, installed add-ins load automatically when PowerPoint starts, create any user interface needed and are available to use with any open files in the app. To update the code, you modify it, create a new add-in, put it wherever PPT is looking for it, and restart PPT. Voila ... code's updated for all PPT files.
First of all, thank you all for your answers. my solution was:
1. export all the modules to *.bas (one file per module).
2. add the modules code my calling:
Application.VBE.ActiveVBProject.VBComponents.Import (filename)
for each file..
3. after finishing:
Set VBComp = VBProj.VBComponents(moduleName)
If Err.Number = 0 Then 'no error
VBProj.VBComponents.Remove VBComp
that's remove the module so it won't be saved in the xls before quiting
I would recommend a manual process in such a scenario.
Suppose you want to take a backup of Module1, then right click on it and click on "Export File". You will get an "Export File" dialog box. Save it as, say Module1 - 22 Apr - 2012.bas at a relevant location. And you are done
How would this help?
1) The dates in the file name will tell you what date the backup was taken so you can actually keep track of the date when the macro was changed.
2) .Bas files can be opened with Notepad. This will help you in comparing the current VBA code with the relevant backup file.
3) If at any point of time you want to retrieve the backup from a particular date, simply delete the existing module (take a backup of it if you want) and then click on "Import File" and import it in your VBA.
HTH