I am currently trying to build a Resource DLL on on Windows Server 2003 and 2008. I am currently working with the Resource DLL code samples supplied with the Windows SDKs, and I can't get them to work.
On Windows Server 2008 I succeeded compiling the Windows 7 SDK ClipBook Server sample, but couldn't get it to properly work in the cluster. When I insert the resource as a resource type to the cluster using "cluster restype /create /dll" it works, but the resource is listed with an unknown type instead of a ClipBook Server type, as I think it should have as it is the type defined in the Resource DLL's code.
I also succeed in creating a resource of that type, but I can never get it to go Online. I always get the error:
System error 5079 has occurred (0x000013d7).
The specified node does not support a resource of this type. This may be due to version inconsistencies or due to the absence of the resource DLL on this node.
And this is despite the fact that the resource is located on all the nodes in the cluster including the one I try to start the resource on.
On Windows Server 2003, I'm working with the Platform SDK version 5.2, and I can't even get the ClipBook Server Resource DLL code sample to compile. I always get MIDL1001 Error saying that it cannot open the file cluscfgserver.idl. I added the path of the file's location to the include path of the project. That didn't work. When I tried to hard-code the path of the file, I got several linker errors when trying to link with this file.
If anyone knows anything about any of these problems, I would appreciate any input.
Those examples are old and busted. Here are a few things I had to go through to get the similar "File Share Sample" to work:
Convert the project to x64 (supposedly 32 bit resources still work, but I haven't been able to verify that)
Add the module definition file (.def) to the linker input property page so that the Startup function is exposed
There were several spots in code where CompareString is used to check the resource type name and 0 is expected on success, but it actually returns CSTR_EQUAL (3).
This is probably why you get the "(Unknown Type)" name.
To register the resource extension, cluster.exe won't accept spaces in the dll name, so in my case I had to use cluster /REGADMINEXT:'FILESH~2.dll'
Only the Property Sheet extension interface is supported, everything else (context menu, wizards) has been removed as of Server 2008
Check the extension DLL stdafx.cpp sources for the Resource Type "ClipBook Server". It should be "ClipBook Server Sample": const WCHAR g_wszResourceTypeNames[] = L"ClipBook Server Sample\0"
Related
I am having a problem with using Apache/Perl to get access to Excel files using Microsoft Data Access Component (MDAC). Somehow I must set the "CommonProgramFiles(x86)" system environment variable in order to get this to work. Otherwise, I keep getting this error message:
System.InvalidOperationException: The .Net Framework Data Providers
require Microsoft Data Access Components(MDAC). Please install
Microsoft Data Access Components(MDAC) version 2.6 or later. --->
System.IO.FileNotFoundException: Retrieving the COM class factory for
component with CLSID {2206CDB2-19C1-11D1-89E0-00C04FD7A829} failed due
to the following error: 8007007e.
The server configuration is:
Windows Server 2008 R2 in 64-bit
Server is installed with Microsoft Access Database Engine 2010
Apache 2.2.25 (that is 32-bit)
Perl 5.12.3 v5 (that is also in 32-bit)
I have my Perl CGI script to call my C# program (that is built for "Any CPU").
The C# program uses MDAC to open and read Excel files (not trying to launch Excel, only try to read data from the Excel files).
I have verified that the server has the latest MDAC available in these 2 folders:
C:\Program Files\Common Files\System\Ole DB
C:\Program Files (x86)\Common Files\System\Ole DB
I have also checked the registries and they look fine. Anyway, I don't have any problem running my C# program directly at the command prompt (it can use MDAC to get access to Excel files). I only have the problem when I use Apache/Perl to use my Perl CGI script to call my C# program (that is when I get that error with MDAC).
I can work around this problem by specifying CommonProgramFiles(x86) in my Perl CGI script, like this:
$ENV{ "CommonProgramFiles(x86)" } = "C:\\Program Files (x86)\\Common Files";
I have this question:
Why do I have this problem? And why setting that CommonProgramFiles(x86) system environment variable can workaround this problem? Why that system environment variable is empty before I set it? Does this have to do with the fact that I am running 32-bit Apache/Perl in a Windows operating system that is 64-bit?
Please help me to understand this issue. Thanks in advance.
(The original version of this post had a question about a second problem. Turned out that problem had to do with an extra double quote in the string. I fixed this, and that problem has gone away. That's why I have removed that second question from the post)
Jay Chan
I did some more research and the issue is the following: until release 2.4.9, the Apache startup routines have mapped "commonprogramfiles(x86)" to "commonprogramfiles_x86_" and that variable does not exists in the environment unless you create it... I have not tested it, but creating that environment variable and making it point to the same location as commonprogramfiles(x86) would probably fix the issue too.
Since the compiled Apache distributions are only using up to version 2.4.46 as we speak, they don't have the fix that allows the parenthesis in environment variables. That's why you still need the PassEnv directive to ensure that Apache passes the correct values to 32-bit CGI scripts.
The following post has some useful details about this:
https://bz.apache.org/bugzilla/show_bug.cgi?id=46751
I used to have the same problem in with Apache 2.4 with dBase compiled apps using ADO-32 bit as dBase is 32-bit. Something has recently changed, possibly with Windows 10 2004 20H2. I needed this fix in July-Aug 2020 but now I don't, the environment variable already exists. Since my Apache version is dated April 2020, that cannot be the reason for the change.
I tried to do some research about this but all I could find is that those environment variables are system ones existing at least since 2017, so why I needed to set this var is a mystery to me, but I would like to understand this, so if you find something, post a follow-up...
https://learn.microsoft.com/en-us/windows/deployment/usmt/usmt-recognized-environment-variables
We have a server PC and other client PCs working connected to server using LAN. We have a application for our internal use which is developed using VB.Net. I used steps in http://www.codeproject.com/Articles/17003/ClickOnce-Quick-steps-to-Deploy-Install-and-Update to deploy clickone statergy for updating our application.After publishing while installing application,this error is coming
I searched i details and found this error
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of D:\Desktop\publish\Global.application resulted in exception. Following failure messages were detected:
+ Downloading file:///D:/Desktop/publish/Application Files/Global_1_0_0_0/Global.XmlSerializers.dll.deploy did not succeed.
+ Could not find file 'D:\Desktop\publish\Application Files\Global_1_0_0_0\Global.XmlSerializers.dll.deploy'.
+ Could not find file 'D:\Desktop\publish\Application Files\Global_1_0_0_0\Global.XmlSerializers.dll.deploy'.
+ Could not find file 'D:\Desktop\publish\Application Files\Global_1_0_0_0\Global.XmlSerializers.dll.deploy'.
I have checked Application files in publish options and Global.XmlSerializers.dll is included. Anyone know why this is happening?
Is there any way to copy some extra files to installation folder(C:\Users\name\AppData\Local\Apps..) when installing or updating clickone application? Because we use some outside support files for our application. Is it possible?
Is there any way to pass argument to clickone application short cut,like passing argument to .exe shortcut("\Global.exe" ?/?customer?/?)?
EDIT:
This is how I published
I checked by giving network path for publishing folder location.But same error coming.
Here is application files included
As you can see Global.XmlSerializers.dll is included
It is looking for a file on the D: drive. It is unlikely that your users all have their D drive mapped to the same location. When you publish you should use the full path rather than mapped drive letters.
//Servername/shareddirectory/appdirectory
Does the install work for you?
Well, there no magic involved in ClickOnce: you can just look into the deployment folder - is the required file there or not?
If not, you need to change the settings in the Publish options for the required file. This message - in my experience - is always a sign that one of the required assemblies has not been published.
In addition it seems that you published to a mapped network drive instead of publishing to an UNC path. You need to publish to a path following the \\server\name\ scheme.
When I have used the wizard and deployed to a network share, in the Publish Wizard:
Specify the location to publish this application:
UDP Path
Click Next
How will users install the application?
From a UNC path of file share
Specify the UNC path:
The same UDP Path (copy pasted from before)
I am currently working on my product installation in Windows XP 64-bit machine. I am trying to register my COM modules as part of installation. I am doing this by adding an entry in 'RunOnce' (registry) key to launch a bat file and registration is done from that bat file.
All my COM dlls are registered correctly but two of the COM servers (.exe) showing error that it failed to load one of its dependency dll. But the same dll is statically linked with another COM server and this server registered successfully !
And surprisingly running the same bat file directly(double clicking on it) doesn't generate any errors and its works fine for all assemblies!. I have checked this in couple of my test machines only of the machines showing this behavior. Unfortunately that't the customer tool machine.
Its not dependency dll not available issue. Because after registering all files by directly running the bat file, I could reproduce this again by adding a key in RunOnce manually and restarting the machine.
Additional info, I am accessing this machine remotely via logmein.
Exact error message: "This application has failed to start because XXX.dll was not found. Re-installing the application may fix this problem".
This XXX.dll is not available in the same path but its in another folder and its path is available in path variable.
bat file content is;
"C:\WINDOWS\system32\regsvr32.exe" RemoteControlHandler.dll
"C:\WINDOWS\system32\regsvr32.exe" ProcPgmHandler.dll
"C:\WINDOWS\system32\regsvr32.exe" GEM300Handler.dll
"C:\WINDOWS\system32\regsvr32.exe" ICEScreenAdapter.ocx
HIB.exe /regserver //Throws error
JobManager.exe /regserver
Cim300Adapter.exe /regserver
GemEquipmentCtrl.exe /regserver //Throws error
Hope this information is enough for experts, feel free to ask if you need any additional information.
Nixon
I'm trying to deploy a package with WebDeploy V3.
The installation process is to sync between a source folder to a destination folder on the remote computer and run a certain powershell script after the sync is done.
The command being executed is:
'"C:\Program Files\IIS\Microsoft Web Deploy V3\msdeploy.exe" -verb:sync -source:dirPath='C:\source' -dest:dirPath='D:\destination',computerName=XXX -postSync:runcommand='powershell -inputformat none D:\destination\Install.ps1',successReturnCodes=0'
This yields the following error:
Info: Using ID '49edd786-d8a0-4acf-be7b-95dd6e1391cc' for connections to the remote server. Performing '-postSync'... Info:
Using ID '5ef9d005-82fa-4811-9f51-1741c8d622de' for connections to the remote server.
Info: Adding MSDeploy.runCommand (MSDeploy.runCommand).
Error: (11/28/2012 4:34:24 AM) An error occurred when the request was processed on the remote computer. Error: The entry type 'Unknown' was not expected at this time. The serialization stream may be corrupted.
Error count: 1.
Error during '-postSync'. Total changes: 0 (0 added, 0 deleted, 0 updated, 0 parameters changed, 0 bytes copied)
Searching the net for this error, I didn't see anybody who encountered it when using runcommand provider. If anybody encountered a similar issue and has ideas or suggestions I would be most thankful..
From what I've seen, using runCommand to execute an arbitrary command line might be a bit buggy. Try moving the commandline into a bat or cmd file and providing a (full?) path to that. The file will be uploaded and executed, as long as you don't try to pass in any arguments to it.
For future viewers of this post: I encountered this same specific error (Error: The entry type 'Unknown' was not expected at this time. The serialization stream may be corrupted) after adding runCommand provider usage to my MyProject.wpp.targets file for the Web Publishing Pipeline MSBuild process. The path was direct cmd shell input used in order to clear readonly flags with attrib -R.
In my case, my build server was configured with WebDeploy 3.0, while the server targeted by the deployment package was configured with Webdeploy 2.0. After upgrading the target server to Webdeploy 3.0 this particular problem was resolved.
However due to other errors surrounding runCommand (providing the correct path to the destination executable at package runtime) my solution still doesn't work entirely so take this all with a grain of salt.
i am using trk for phone debug
it is working properly for Helloworld project
but it is showing error for my project when i start project in phone debug mode
1)Load failed
2)TrkProtocolPlugin:failed to download specified file to target
(please verify that target path is writable)
if any body understand what problem i am facing plz help me out from this problem
Thanks in advance
In your case, I would check:
if the application has correct privileges assigned (along with appropriate certificate)
if ID of the application is not in conflict with some other application on device
if installation package does not contain problematic commands (e.g. copy commands to non-accessible directories)
Can you manually install the application on the phone? That is the first test you must perform before even attempting to use TRK.
Also, can your application start, at least to the point of showing a panic? TRK cannot help you if the applications cannot even load its DLL dependencies due to for example Platform Security capability mismatch. TRK needs a process to attach too in order to do its job ...