I have two MSBuild tasks in my CC.NET config. In the end of the execution, i can see two blocks of warnings/errors in the log and published email. But the problem is that the contents of both the blocks are the same and that is from the second MSBuild task!! In another way, the second MSBuild task overwrites the first log, and then creates another one for itself effectively creating two exactly identical block!!!
Do anybody have any thoughts on this? I am happy to provide more information if you require about the environment and configuration.
Thanks,
James Poulose
1/ Do you have two msbuild tasks inside ccnet config file ?
2/ In the MSBuild task, try to add the msbuild logger
[path_to_ccnet]\server\ThoughtWorks.CruiseControl.MsBuild.dll
Related
We have an MSBuild task that builds our *.sqlproj file, the output of which is loaded back into TeamCity as an artifact for subsequent deployment.
Similar to this user, we are having some unpredictable output file naming happen:
Invalid file names when trying to deploy SSDT project with TeamCity 8
It appears that sometimes, it produces this output file under /bin/Release:
MyProj.sqlproj.dacpac
Then subsequent builds produce this file in the same folder:
MyProj.dacpac
We haven't done indepth testing yet - I was wondering if anyone else has seen similar or has a suggested troubleshooting path?
To be clear, it's the same task, running the same command against the same project - just run repeatedly overtime as new checkins happen.
Sounds like you have conflicting .sqlproj files being checked in.
I'd start by checking the history.
Well, after looking more closely at the build log I could see that the TeamCity MSBuild runner appears to be creating some temporary virtual project files (or something, I don't know for sure because they get deleted) with names like:
MyProj.sqlproj.teamcity
I theorized that this may be confusing MSBuild or one of the targets related to building dacpacs, so I replaced the TeamCity MSBuild build step with a Command Line build step that calls MSBuild on the original project file itself, and this appeared to solve the problem. It now produces the dacpac with the file I'm expecting.
I don't have time to dig further now, but I could believe that there's some logic in the chain somewhere that is deriving the name for the final *.dacpac from the name of the project file being used. My guess is that it just strips off everything after the last "." and attaches the ".dacpac" suffix.
I don't fully know why it would occasionally create a *.dacpac file with the correct name, but I was at times doing a manual build in the TeamCity agent work folder from the commandline on the build server itself, so this may have just been a file leftover from previous executions.
I am setting up TeamCity to deploy our Website Project application (using a *.wdproj) and Web Deploy application to IIS.
I have a build configuration that uses MSBuild.exe with the MSDeployPublish to build and then deploy the application.
We now want to get the application to deploy to multiple target environments, therefore need a way to supply different settings based on the target environment.
I have added a parameters.xml file to the Web Deployment Project, and have verified that the parameters set in here are making all the way through the target IIS server and being correctly applied - great!
Now what I want to do is have different parameter settings per environment. I was hoping I could use something like the MSDeploy.exe -setParam argument to specify different values for each environment, however I can find no way to get my parameter values into MSBuild via the commandline.
I suspect I might need to do one of the following:
Split MSBuild and MSDeploy into separate build steps.
Configure a task somewhere in the pipeline to take 1 of n versions of parameters.something.xml and move it into parameters.xml so it gets picked up by the rest of the pipeline.
I'm looking for the simplest way to move ahead at this point, any suggestions welcome.
For reference, here is the command I'm experimenting with now:
msbuild /target:MSDeployPublish MySite_deploy.wdproj /P:Configuration=Debug
/P:DeployOnBuild=True /P:DeployTarget=MSDeployPublish
/P:MsDeployServiceUrl=www.myserver.com:8172/MsDeploy.axd
/P:AllowUntrustedCertificate=True /P:MSDeployPublishMethod=WMSvc
/P:CreatePackageOnPublish=True /P:UserName=MyUser /p:Password=MyPassword
/P:DeployIisAppPath=www.myserver.com/MySite
/P:ServerURL=http://www.tryingtoforcethis.com
It's working beautifully except the value for ServerURL, which is a parameter I've defined in my parameters.xml, is not making its way into the target site. The default I specified in parameters.xml, however, is. So I know that the parameters are working, I just can't figure out how to add them to the msbuild commandline.
Well, I think the short answer is that with MSBuild 4.0 and VS2010, you can't just pass arbitrary parameters into MSDeployPublish from the call to MSBuild.
I found these posts helpful:
http://forums.iis.net/t/1167657.aspx/1 - Ming Chen's comments
http://www.hanselman.com/blog/TinyHappyFeatures3PublishingImprovementsChainedConfigTransformsAndDeployingASPNETAppsFromTheCommandLine.aspx - the comments from Richard Szalay at the bottom
After reading these, and sifting through the Microsoft.Web.Publishing.targets file for some time trying to find a "way in", I finally settled on having multiple copies of Parameters.xml in my project folder in source control, labelled according to their environment eg:
Parameters.Test.xml
Parameters.Staging.xml
Parameters.Live.xml
Then, prior to the package and deploy, I just copy one of these files into Parameters.xml and it gets picked up by the rest of the pipeline - done!
BTW I had a temporary problem getting the parameters.xml copy and subsequent cleanup to work within a single MSBuild.exe call due to what seems to be some sort of file access issue, I've detailed it here:
MSBuild.exe Copy task not working properly unless a version of the file already appears in target
To answer your question, the parameterization of your command line is not a concern of MSBuild. Instead, you should utilize external tools. For example, if you run your msbuild command from a batch file you could pass the parameters to the batch file and run it for each environment with different parameters. Another approach is to use a build system like TeamCity or VSTS and utilize their parameterization mechanism. Adapted for the VSTS or TFS, your command could look like this:
msbuild MySite_deploy.wdproj /target:MSDeployPublish /p:Configuration=Debug
/p:DeployOnBuild=True /p:MsDeployServiceUrl=$(IIsHostNameIp)
/p:AllowUntrustedCertificate=True /p:MSDeployPublishMethod=WMSvc
/p:CreatePackageOnPublish=True /p:UserName=$(IIsUserName) /p:Password=$(IIsPassword)
/p:DeployIisAppPath=$(IIsSite)
In addition, I would suggest some clean up for your origianl command line:
Using both /p:target and /p:DeployTarget is redundant. Any one of them is enough. Also it could be replaced with /p:WebPublishMethod.
For /p:MSDeployServiceUrl it is enough to only provide a DNS name or IP. the port and the Url is automatically derived from the /p:MSDeployPublishingMethod=WMSVC.
The custom parameter /p:ServerURL is unknown and won't be mapped anywhere.
msbuild.exe {build-script.proj} /property:{someParameter=someValue}
In your build script you can use $(someParameter) as a variable
I've created a custom MSBuild task for our database project. This tasks uses XLSX file to generate reference data insert scripts that get merged into the post deployment script.
I tested this with a test MSBuild proj and it works well.
Now when I integrate it into the real DBProj file, the output of the task is duplicated and I cant see the MSBuild output logging.
So, my questions are:
1) How can I see the full MSBuild logs in Visual Studio?
2) I'm not sure AfterBuild or BeforeBuild is running twice but maybe?
Thanks
You can debug your MSBuild scripts, set breakpoints, inspect values, etc... See here: http://blogs.msdn.com/b/visualstudio/archive/2010/07/06/debugging-msbuild-script-with-visual-studio.aspx
I just downloaded TeamCity 7 today and decided to get it up and running for my Azure solution. I am not trying to do anything fancy (yet) and started with a very basic command line build:
msbuild /t:Publish /p:Configuration=Release;TargetProfile=Production;PublishDir=S:\HoursTracker\Deployments
This builds successfully and produces a package that looks like this*:
I then attempted to configure TeamCity in an identical fashion:
This builds successfully and produces a package that looks like this*:
What I don't understand is why there is such a huge discrepancy in the size of the MVC project. Publishing directly from Visual Studio produces the exact same result as my MSBuild command so I'm convinced that TeamCity is the odd man out. Since I assume TeamCity is not broken, can someone please educate me on how to properly configure it so that I get the expected output?
*I have renamed the package files with .zip so that the details were viewable for this post.
Ming's answer helped me solve the mystery. After inspecting the contents of the zip files, I discovered the difference was that my MSBuild package contained bin and obj folders and the TeamCity package did not.
After making this discovery, I realized that I could specify multiple targets to MSBuild and prepended "Clean" to my targets switch like so:
msbuild /t:Clean;Publish /p:Configuration=Release;TargetProfile=Production;PublishDir=S:\HoursTracker\Deployments
As expected, this removed those folders. So apparently, TeamCity specifies "Clean" implicitly for you. Mystery solved.
Windows Azure packages may be larger than we expect. You can rename the cssx file to zip and you will find out what’s inside the package. In addition to the web application’s usual files, there’re a bunch of Windows Azure files. For example, if you enable diagnostics, you will see a diagnostics folder, where you’ll find files used by Windows Azure diagnostics runtime.
Best Regards,
Ming Xu.
Why you specified x64 for msbuild runner? Try selecting tools version as well. You have not specified /p:Platform parameter. Does publish task involve rebuild?
TeamCity starts msbuild with number of /p: parameters taken from " properties and environment variables " section, plus some well-known parameters like configuration name or project name.
I have had my first successful build using CC.Net + MSBuild on legacy project. Only took 8 hours.
My newb question is: Where is the output?
My ArtifactDirectory is empty. Where did everything go?
Did you specify the ThoughtWorks.CruiseControl.MSBuild.dll logger in the msbuild-task? Did you have the xmllogger publisher?
EDIT:
What are you looking for : the results/logs that goes into the dashboard and mail or the website/dll/program you built?
Could you post your project configuration?
EDIT2:
The website/dll you built are located in the outDir you specified in your msbuild task. If you didn't override either the OutDir or the OutputPath property (in your msbuild task or msbuild build script) your website should be located in the WebProject\bin\Release (or Debug)_PublishedWebsites and your dlls should be located in every Project_dir\bin\Release (or Debug).
If you want a common output you need to specify it by overriding OutputPath or BaseOutputPath (see here http://msdn.microsoft.com/en-us/library/bb629394.aspx ).
If your source projects don't compile to custom folders, the code will be located wherever the source was pulled down to on the build box. As Benjamin stated, this will be the workingDirectory specified in the msbuild task.
If you didn't specify a working directory, I believe CruiseControl.net puts code in:
C:\Program Files\CruiseControl.NET\server\[Project Name]\WorkingDirectory