We are trying to setup stylecop for a team development environment. So far what we have done is:
Checked the files into source control
Create an environment variable on every machine that points to that location (each dev has source checked out to a different location, this solves that)
Add the tag to the project as follows:
This works great, but VS complains that the file is unsafe, and I know to fix that we have to mark is safe in the registry. We wanted to create a .reg file to import this setting and make it easier for everyone. Can we use that environment variable in the path? I have tried the snippet below, but that doesn't seem to work. Is the syntax for an environment variable different?
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\9.0\MSBuild\SafeImports]
"StyleCop.4.3"="%StyleCopLocation%\\Microsoft.StyleCop.Targets"
Why you need to host that Targets file in a global place? Everyone can install a copy of StyleCop.
If you in fact plan to share StyleCop settings, please configure the projects to use a project locally setting file (*.SourceAnalysis). You can check in this file along with your projects, and then everyone is in sync.
Related
Every time I tried to config a remote interpreter, Pycharm asked me to set a sync folder. In my routine, I usually have the Cannot find declaration to go to error which can not be solved by invalidating caches. So I have to config the interpreter again. And these caused the redundant folders in my remote machine. And another situation is that I want to create other projects with the same interpreter. Where I have to config the folder mapping for each project to make the interpreter valid.
I do not understand this way. In my opinion, the sync folders should correspond to my local project. And the interpreter should be independent of the projects.
Every time I tried to config a remote interpreter, Pycharm asked me to set a sync folder.
To be able to execute a script on the remote machine, it is necessary to make sure it exists on it. This is by design, but if you already have a project folder deployed, you can change the suggested paths to needed ones during the interpreter configuration.
See step 7. https://www.jetbrains.com/help/pycharm/configuring-remote-interpreters-via-ssh.html#ssh
And another situation is that I want to create other projects with the same interpreter. Where I have to config the folder mapping for each project to make the interpreter valid.
Unfortunately, this setup does not work, please vote for
https://youtrack.jetbrains.com/issue/PY-40680/Allow-reusing-a-single-remote-interpreter-in-multiple-project
to increase its priority.
I need to read the settings file (appsettings.json) from another project in my solution. When I use:
Directory.GetCurrentDirectory()
From within the current project, I get the following path:
{projectRootFolder}\bin\Debug\netcoreapp3.0\
My question is: How can I get to the exact same folder in another project in the same solution? Or is there a better way to access the settings file from another project within the current solution?
If I understand the problem correctly there are two misconceptions:
It has little sense to access output directory of an another project as the structure has sense in compile time only. You will not have the same structure in run-time once the application is "published".
The Directory.GetCurrentDirectory() returns the current working directory. It is just a coincidence to be set to project output directory by Visual Studio. It can be totally different directory.
It is not clear to me what exactly you are trying to achieve. I recommend using the configuration system provided by .net core to access the configuration and add that other appsettings.json as another configuration provider.
If you really need to open the settings file then the project with the settings file (A) should mark the file as "Copy to Output Directory" and the project to open the file (B) should reference the project A. So the settings file will be copied to output of the project A too.
What you're attempting to do is not possible. There's no inherent way for ASP.NET Core to know where a totally different app running in a totally different process is located.
If you need to access appsettings.json from another project, then you would need to include it as a linked file in your project, and set it to copy to output. Then, you're accessing it actually from your project (which is all you can do), but the file itself is shared.
However, this is almost always a bad idea, and usually a sign that you're doing something wrong. If you truly do need to share the settings, then what you should be doing is putting them in a distributed config provider like Azure Key Vault or similar, where both projects can independently access the settings from a common store.
I'd like to set some specific options in idea.vmoptions and idea.properties for IntelliJ IDEA 14, but I don't have access to those files in C:\Program Files\... (yes, that's Windows, don't troll ;)
Is there a folder in %UserProfile% or an environment variable I could set to read those files (both vmoptions and properties!) from elsewhere?
Please don't suggest to copy the whole IDEA folder elsewhere, there's a reason why I can't access it. I would be interested in a Linux solution too, the same would most likely work on Windows.
My Research
For Mac there're specific instructions at Increasing Memory Heap, but for Linux and Windows it's just filename which are trivial to find out anyway.
I also found IntelliJ IDEA files locations, but it says can be modified in IDEA_HOME\bin\idea.properties which doesn't help since I can't access that file, but want to change properties in it.
Update: Simple Answer
Create IDEA_PROPERTIES and IDEA_VM_OPTIONS environment variables and point them to the files you want, restart IDE, done.
Also see documentation for more (and maybe report that it lacks any mention of IDEA_PROPERTIES).
You can use %USERPROFILE%\.IntelliJIdea14\idea%BITS%.exe.vmoptions on Windows as custom options file. I tried it and it works.
Another way that I haven't tried, but I think should work, is to copy idea.bat and edit it to use the file you need.
I have IntelliJ IDEA 13.1 running on a number of machines, all with identical paths for the project and modules but different local user names. The .idea directory gets committed to the git repo. When I make changes to my Global Libraries those are not reflected on the other machines because that info is in
C:\Users\user\.IdeaIC13\config\options\applicationLibraries.xml
I want changes to Global Library settings to be required only once and applied everywhere.
Should I tell IDEA to look for applicationLibraries.xml under the .idea directory instead of in the local user's directory which is not under version control? how?
Solution was to go into Project Structure, right click on each Global Library and choose "Copy To Project Libraries..." then remove the original from Global Libraries. Then in each project remove the old global library and add the newly created project library. This way library data is stored in the .idea dir and not the user's dir.
The applicationLibraries.xml file, among others, are stored in a platform-dependent folder in the repo, for example in _linux or _windows. If this is your problem, read on.
For things like keymaps this is wanted because things work differently after all, but for libraries which either only contain jars, or contain binaries (dll/so) for all platforms, this is unwanted.
On the PC with the global libraries (assuming linux for now):
Copy the file from config/settingsRepository/repository/_linux to _windows,
Execute git add _windows/applicationLibraries.xml from the command line,
Restart IntelliJ,
Merge repo (not Overwrite remote)
This solved it for me, and now I have global libraries on all my computers, and not just my linux computers.
About a week ago I installed golang successfully on my computer and got it's terminal commands to process. So by that, I know go is on my computer.
I have been looking for a good IDE and found https://code.google.com/p/liteide/ LiteIDE which was made specifically for Go.
I read that if you already had go installed on your computer then you could use LiteIDE to start building your code right away. I must have read something wrong some where because I cannot get my projects to build at all. I think it there may be a missing/incorrect path and or something is just setup incorrectly.
This is the error I get in the console:
Current environment change id "win64-user"
C:/go/bin/go.exe env [c:\go]
set GOARCH=amd64
set GOBIN=
set GOCHAR=6
set GOEXE=.exe
set GOHOSTARCH=amd64
set GOHOSTOS=windows
set GOOS=windows
set GOPATH=
set GORACE=
set GOROOT=c:\go
set GOTOOLDIR=c:\go\pkg\tool\windows_amd64
set TERM=dumb
set CC=gcc
set GOGCCFLAGS=-g -O2 -m64 -mthreads
set CXX=g++
set CGO_ENABLED=1
Command exited with code 0.
First_Lite_Go_Proj [C:/go/src/First Litel Go Proj]
Error: process failed to start.
I checked the C:/go directory to make everything there is correct and it was. Also I'm using 64bit windows 7 and double checked that as well.
Any ideas? Mine are: Missing/Incorrect Paths, Can't access a certain directory due to restrictions.
While I have not tested this in Windows 7, on Windows 10, these were the steps that I took to make LiteIDE work
Installed Go to C:\Go
Added C:\Go\bin to PATH and made sure go was working from Command Line
This was the most important step for me. Defined GOPATH in an environment variable. In my case, it was C:\Users\vivek\Documents\Source\Go. I also made sure that there were three folders src, pkg and bin were created in GOPATH. At this point go env was showing me correct values for GOPATH and GOROOT. go get, go build and go install was working as well at this step.
Downloaded and unzipped LiteIDE to C:\liteide. Started LiteIDE and it worked out of the box for me. Make sure that GOPATH is seen correctly by LiteIDE by going to View > Manage GOPATH
Hope this helps. Good luck.
It's not a good idea to keep your projects in the GOROOT path, which per default (when installed using the MSI installer) is C:\Go. Always keep it separated from there. It also helps to avoid issues with updates.
Since Go projects are made up of packages which are organized in directory structures it is important to follow a few rules and keep the working space for your Go projects separated and clean.
In my opinion its best practice to create ONE working directory as the root for ALL your Go projects somewhere in your user space and stick to it.
One way to do this is to create a directory like "work" and set the environment variable GOPATH to it (e.g. C:\Users\Peter\Documents\work). Make sure to relog or restart your computer after your changes.
Upon certain operations Go will automatically create the directories bin, pkg and src below your GOPATH.
src contains your created or downloaded Go source files,
pkg contains your installed package objects, and
bin contains your installed executable files.
bin or pkg will automatically be created when you use the go install command to install a binary executable or a package. It's important to understand that these are files that are not part of the Go installation.
src, if it does not yet exist, will automatically be created the first time you issue a go get command or in case of LiteIDE, the first time you create a new Go1 Command Project or Go1 Package Project. Watch the "Location:" field on the dialog box, it should include your path defined in GOPATH followed by \src (e.g. C:\Users\Peter\Documents\work\src).
In the name field enter the path you want to use for your project. If you plan to track the development of your project on Github (or other repo) it's common practice to include the path to the Git repo in your source path (e.g. github.com/petergloor/hello-go).
Of course you can use any other structure to organize your projects as long you make sure they fall below the src directory in your GOPATH.
For more information about Go workspaces read https://golang.org/doc/code.html#Workspaces.
A final note about the GOROOT environment variable. Dont explicitly set this if you install Go in C:\Go. It's enough to include C:\Go\bin in your path and to set GOPATH. GOROOT is only needed in case Go is installed at another location.
I also had this problem first, but after completing the installation process, I succeeded.
Step 1:
Run (Ctrl+R) -> run target, request build first.
BuildAndRun(Ctrl+F7) -> build and run target
FileRun(Alt+F6) -> go run
step 2:
Check Config via this URL:
https://www.goinggo.net/2013/06/installing-go-gocode-gdb-and-liteide.html
Try setting up the GOROOT to the directory where go was installed. It worked for me.
Do you have 'Install' keyword in your project name? Try remove it.
You have to setup LiteIDE variables correctly (if there are not by default).
Please, check two options:
Go to Settings → "Manage GOPATH"
Options → LiteEnv (there are
environment definitions files). Just double click on someone and
setup Go environment variables.
I'm not sure how this works, but it worked in my case. I got this idea from this video on Youtube-Chris Hawkes
Open LiteIDE.
Click File---New.
Select "Go1 Command Project".
Browse the desired path.
Select the desired folder.
Name the folder and click Ok.
Now, you will be able to see a "main.go" file opened in the IDE.
Write whatever code you want to run in this file with correct syntax, it will run.
The only problem with this is, whenever I create another ".go" source code file in the same folder, the same error is shown. So, you might have to edit this file every time, you try to write new code.