I have been working for an installer in VC. Although it is working fine with Windows 2000, XP and Windows 2003, its not working under Windows 2008 and Vista after a crash. Interestingly it will work like a charm as and when I changed the executable name.
I'll explain briefly what i did in Windows 2008 and Vista.
My executable's name is Setup.EXE.
Starting the installation for the first time.
I have to abort the installation whenever the setup dosen't meet any prerequisites like IIS is not installed.
Application gets aborted because of lack of prerequisites.
I had made available all prerequisites.
Trying to install again.
Setup.EXE crashed.
I had changed Setup.exe to __setup.exe.
Trying to install again.
Installed successfully.
I could not run the application with name as Setup.exe again.
Can you please tell me what is wrong here?
Regards,
Harish
To further analyze this, the call stack for the crashed application is required.
If vista/2008 starts an executable with the name of setup.exe it will automatically elevate.
Related
I updated a vb windows forms application using visual studio 2015. I need to install this on a windows xp machine.
I updated my application to run using .net framework 4.0, the same as the one installed in the xp machine.
When I tried to install it the first time, it asked me to restart the machine, which I did. after restarting it gave me the error that installation is incomplete.
I have been researching all morning on how to fix it, i tried the dpca.dll solution, i tried restarting the windows installer service, i used msiexec to view the logs, and now it gives me the error that a dll required for this install to complete could not be run. I have no idea which dll, it doesn't say.
My application is fine. It builds and installs beautifully on windows 7 and above.
Please help me before I smash the windows xp machine into pieces.
I came across a comment that i can run the executable itself, just needed to copy all the dll files and put it in the same folder as the executable. So I just copied the whole folder and run the exe on the xp machine and it works.
I'm using the Crystal Report 10 viewer ActiveX control in an Access App I've written. Works great in Office 2003 on 32bit versions of Windows. The problem arrises when I try to run the program in 64 bit Windows (with 32bit Office). I get the following error:
Run-time error '429': ActiveX component can't create object
I get this error on the following line of my VBA code.
Set rdApp = CreateObject("Crystalruntime.application.10")
How can I get this to work in 64bit?
I don't have any specific experience with Crystal Report, but I do have some experience with installing components on a 64-bit Windows environment that were intended for 32-bit Windows, so here are some general suggestions of things to try:
Before installing, try loosening the security privileges - I have Windows Server 2008; on this OS, they're under Start | Administrative Tools | Local Security Policy. Many old installers are thwarted by these controls. You'll want to return them to their defaults after the install.
Make sure that you run the installer with admin privileges (right-click; run as Administrator).
Examine the installation log for Crystal Report - it may indicate a failure registering a component. In one instance, I was able to get the installation working by running the command to register the failed component manually, on an administrator-privileged command line (the command was in the log).
If acceptable, try to create a Windows Virtual Machine running a virtual Windows XP, and try the installations there (this might be a bit tedious, due to your need for MS Office).
Take a look at VMWare's ThinApp - this is intended for packaging applications for administrators, but this was the solution we ended up using to shield one of our 32-bit apps from Windows 64-bit perils
Hope this helps; we struggled for awhile trying different things to get our legacy apps working on a 64-bit environment.
I have a windows 8 x64 machine, pretty new image, and I just installed VS2012 C# express, and the install completed fine. but when I launch the IDE, nothing happens, I do not see a new process starting in Task Manager either.
After googling a bit, people suggest that it may be extensions and to run "devenv.exe /safemode". I did not install any extensions, and "devenv.exe" does not exist in my system. all I can find is %SystemDrive%\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\WDExpress.exe. This is where the shortcut created on my desktop points too. I have tried using the " /safemode" switch with that .exe, but nothing happens.
I am currently running a repair on the program now, maybe that will fix it.
Any suggestions would be appreciated.
Thanks.
I found the issue, The Microsoft Application Compatibility Toolkit 5.6 was locking some files. After removing it. VS2012 opened right up.
My company has a VB6 application using Crystal Reports 7 which a client has asked to be installed on Windows 7 32 bit. It is currently installed on Windows XP 32bit SP2 machines at the client. Connection to the DB is done via ODBC to SQL Server 2000 instance on another server.
On Windows 7, the installation works fine, however when you try to open the application, the error is given.
I have looked at the following:
Registering all the dll's and ocx files using regsvr32. Some will not register as they either are registered already or the following message is given "Make sure that "[name].dll" is valid DLL or OCX file and then try again." I read this forum thread regarding this: http://social.msdn.microsoft.com/forums/en-US/vblanguage/thread/0653f685-4526-45d9-89f3-8c479a6b4c62
Monitored the opening of the application using a ProcessMonitor application to try and spot if there is a missing dll or ocx file - this does not seem to be the case.
Reviewed the application according to this list and nothing seems to be against these guidelines
I've noticed two items in the knowledge base that relate to this
http://support.microsoft.com/kb/281848 - the comdlg32.ocx bundled with the application is version 6.0.81.69 and the one in the system32 folder on the dev machine (WinXP 32 bit) is 6.1.97.82. However if this was the issue then surely it would not work currently?
http://support.microsoft.com/kb/184898 - I'm not sure how to confirm that this is the issue
Finally, due to complexities, I am not allowed to make code changes to this application. Even if I was, I'm not a VB6 programmer, just the guy who got the terribly support project! If code changes are required, then I'll have to investigate using WinXP mode.
Update: I get the same error in XP Mode. That's a Win XP with SP3 VM. This runs on a Win XP SP2 VM, is there potentially something in SP3 that would have caused this to occur? Or is it just a fact of it being XP Mode?
I got the same error but I solved by using regsvr32.exe in C:\Windows\SysWOW64.
Because we use x64 system. So if your machine is also x64, the ocx/dll must registered also with regsvr32 x64 version
The file msrdo20.dll is missing from the installation.
According to the Support Statement for Visual Basic 6.0 on Windows Vista, Windows Server 2008 and Windows 7 this file should be distributed with the application.
I'm not sure why it isn't, but my solution is to place the file somewhere on the machine, and register it using regsvr32 in the command line, eg:
regsvr32 c:\windows\system32\msrdo20.dll
In an ideal world you would package this up with the redistributable.
This download fixed my VB6 EXE and Access 2016 (using ACEDAO.DLL) run-time error 429. Took me 2 long days to get it resolved because there are so many causes of 429.
http://www.microsoft.com/en-ca/download/details.aspx?id=13255
QUOTE from link:
"This download will install a set of components that can be used to facilitate transfer of data between 2010 Microsoft Office System files and non-Microsoft Office applications"
You say it works once you install the VB6 IDE so the problem is likely to be that the components you are trying to use depend on the VB6 runtime being installed.
The VB6 runtime isn't installed on Windows by default.
Installing the IDE is one way to get the runtime. For non-developer machines, a "redistributable" installer package from Microsoft should be used instead.
Here is one VB6 runtime installer from Microsoft. I'm not sure if it will be the right version for your components:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=7b9ba261-7a9c-43e7-9117-f673077ffb3c
I just, quite anxiously, downloaded the spankin new WCF REST starter kit. The installed failed. Anyone else had this problem?
http://msdn.microsoft.com/en-us/netframework/cc950529.aspx
Edit: The install fails during the template installation. The VS JIT debugger window pops up. Nothing else is running the PC, I am running as an admin on XP Pro, and the error occurs from either the EXE or the MSI.
Yes, it just failed for me too. Got a warning about replacing an existing file during the template install, then a hard crash after I told it to continue.
EDIT: Just tried again - it worked. Did 3 things different:
Closed all running VS2008 SP1 instances
Read the install guide closer and chose to run setup.exe instead of the msi, and did "Run As Administrator"
Didn't close the MSI installer until the delayed template installer had completed.
Here's the Install Guide:
SYSTEM REQUIREMENTS:
Windows Vista OR Windows Server 2008 OR Windows Server 2003
Visual Studio 2008 SP1
INSTALL AND USAGE STEPS:
Before installing, remember to uninstall any versions you have installed on the machine (see the Uninstall section below for steps to uninstall).
Run the setup.exe in administrator mode (right click on setup.exe and select 'Run as Administrator')
The install process will launch a visual studio installer. Remember to click through the visual studio installer to install the templates. NOTE: You may miss the vsi that is launched, so be sure to finish both the vsi and setup.exe installs to ensure that the whole install process is complete.
While running the vsi, you will get a prompt, which you can safely accept to continue.
Once installed, build the Microsoft.ServiceModel.web project installed on your machine.
You need to reference the Microsoft.ServiceModel.Web.dll assembly from the template generated projects, as well as from the samples. Please remember to verify this while using your templates and projects.
Note that you may also use a project reference instead.
There is a solution that includes all the samples provided in the "WCF REST Starter Kit\Samples\WCF REST Starter Kit Samples" location. This gives you a way to easily try out all the samples from one place.