When doing hallway usability tests do most of you make your apps fully or near fully functional? Or do you just make sure the links or flow chain correctly? Or do you just draw on paper and go with that?
I'm would like to test early on a prototype and am trying to find a good balance. But at the same time am worried that some non functional parts might actually not give representative results.
Thanks.
Usability tests, hallway or otherwise, only need the functionality that you need to test. In most usability tests, you should go in with specific design questions to answer and develop your prototype to the point where it can answer those questions. For example, if you need to test if users understand your indication of the sort order for a table, all you need is a paper picture of the table showing the sort indication (with the table contents blurred) and ask them how the table is sorted. If you need to test the IA, all you need is a bunch of web pages, empty except for a title, that are linked through the navigation menus.
You only need the pages relevant for the tasks you give your users. If you’re just testing the IA, then you only need the pages on the normative path. If you are also testing error recovery, then you need the pages off the normative path along with the full navigation controls. If you are also testing error detection, then you need content on the pages as well.
You can also simulate functionality when that’s easier to do. For example, in testing if users can figure out how to get a desired sort order, when the user clicks on a non-functioning control for sorting the table, you can say, “Okay, doing that will get you this,” and you take the mouse and select a bookmark that shows the table in the new sort order.
In hallway testing, if users breach the fidelity envelope, you can simply say, “I haven’t made that part yet. Let’s go back to A, and continue from there.” Of course, you should note that the user made a wrong turn in the task you intended for them. I haven’t had any problems with users complaining about non-functional features when I tell them up front it’s an incomplete prototype and we’re only testing the UI for features x, y, and z at the moment.
For low fidelity prototypes, I often call them “mockups” or “drawings” to users rather than “prototypes” to indicate the low functionality. You can put obvious placeholders in for missing content (e.g., “Blah, blah, blah…”, “TODO: Picture of product about here.”). If a user comments on something outside the fidelity envelope (e.g., “This symbol should be red to stand out more”), simply note it, and say that topic is under development (e.g., “Thanks. We haven’t started work on the colors yet. We’re just trying to figure out how to organize the site right now.”).
Usability testing with limited-fidelity prototypes is really necessary for iterative design to be feasible for most projects. Otherwise, you waste too much work developing things that have to be redone.
A couple things to remember:
Test early and often.
The goal of usability testing is to find problems with the UI, not Q/A your code.
Therefore, if users can see the parts of your UI you are interested in testing and interact with them in a realistic way (e.g., click on buttons and links), you should be able to collect useful data. If some links are dead-ends, that's okay, as long as there's some way for users to recover and continue on. Basically, with prototypes, the "correct" path should work, but it's okay if incorrect paths don't (as long as there's a reasonably quick way to get back on the correct path). Even static storyboards (non-functioning drawings of a UI) can provide you with some information if you ask the right questions, e.g., "What would you do on this screen if you wanted to view your shopping cart?").
I would suggest a couple rounds of usability testing. First on paper, perhaps later on screen, generally throughout the application lifecycle (take an Agile approach to it).
There is a good argument to be made for paper prototypes. When users see a screen, even limited functionality, they may be hesitant to suggest changes since it looks "done."
Make no mistake, it's not trivial to get it all down on paper, but that's where I would start. Probably start with just a section or two of the application. And make sure somebody with good people skills and/or explaining skills is there to walk the user through it. Have a second person on-hand to take notes. Try to ask open-ended questions, etc.
For a hallway test, I would test with NONE of the functionality implemented.
Test against designs done on a whiteboard or on paper. You'll be surprised at how much you find out in these minimal mockups. And they are very inexpensive to make!
Functional prototypes are for later. If you give your usability subject a functional interface, they are much less likely to question whether you've implemented the right set of features in the first place.
I would make the UI functional, so that the user can really play with it, it will be much better than a static image. People can tell you whether they feel comfortable on the UI.
I would make sure everything in the UI works, or at least takes you to a clear, unambiguous message pointing out that the feature isn't implemented yet.
Showing prototypes to clients with a disclaimer up front about how feature X doesn't work yet will usually be ignored. They'll try out the prototype, click on featuree X and indignantly reply "Feature X doesn't work! This really needs to work in the final version! Why doesn't it work?". The client is confused and unhappy about the product, and it's frustrating for yourself because it overshadows the positive feedback. Besides, you told them it didn't work, why can't they use their imagination to envision how it would work in the final version?
Make it work, be it with a rough version, dummy data, or even a simple message saying "would show results sorted alphabetically now".
Related
My friend asked me this question today. How to test a vending machine and tell me its test cases. I am able to give some test cases but those are some random thoughts. I want to know how to systematically test a product or a piece of software. There are lots of tests like unit testing, functional testing, integration testing, stress testing etc. But I would like to know how do I systematically test and think like a real tester ? Can someone please explain me how all these testings can be differentiated and which one can be applied in a real scenario. For example Test a file system.
Even long-time, well respected, professional testers will tell you: It is an art more than a science.
My trick to designing new test cases starts with the various types of tests you mention, and it must include all those to be thorough, but I try to find a list of all the ways I can interact with the code/product.
For the vending machine example, there are tons of parts, inside and out.
Simple testing, as the product is designed to work, gives plenty of cases
Does it give the correct change
How fast can it process the request
What if an item is out of stock
What if it is overfilled
What if the change drawer is full
What if the items are too big, or badly racked
What if the user puts in too little money
What if it is out of change
Then there are the interesting cases, which normal users wouldn't think about.
What if you try to tip it over
Give it a fake coin
Steal from it
Put a coin in with a string
Give it funny amounts of change
Give it half-ripped bills
Pry it open with a crow-bar
Feed it bad power/brownout
Turn it off in the middle of various operations
The way to think like a tester is figure out every possible way you can attack it, from all the "funny cases" in usual scenarios, to all the methods that are completely outside of how it should be used. Any point of input, including ones you might think the developers/owners have control over, are fair game.
You can also use many automated test tools, such as pairwise test selection, model-based test toolkits, or for software, various stress/load and security tools.
I feel like this answer was a good start, but I now realize it was only half of the story.
Coming up with every single way you can possibly test the system is important. You need to learn to stretch the limits of your imagination, your problem decomposition skills, your understanding of chains of functionality/failure, and your domain knowledge about the thing you are testing. This is the point I was attempting to make above. With the right mindset, and with enough vigilance, these skills will start to improve very quickly - within a year, or within a few years (depending on the complexity of the domain).
The second level of becoming a very competent tester is to determine which tests you should care about. You will always be able to break every system, in a ton of different ways. Whether those failures are important or not is a more interesting question, and is often much more difficult to answer. The benefit to answering this question, though, is two-fold.
First, if you know why it is important to fix pieces of the system that break (or to skip fixing them!), then you can understand where you should focus your efforts. You know what you can afford to spend less time testing, and what you must spend more time on.
Second, and more importantly, you will help your team expose where they should be focusing their efforts. You will start to uncover things that are called "second-order unknowns". Your team doesn't know what it doesn't know.
The primary trick that helps you accomplish this is to always ask "why?", until whoever you are asking is stumped.
An example:
Q: Why this test?
A: Because I want to exercise all functionality in the system.
Q: Why does this system function this way?
A: Because of the decisions that the programmer made, based on the product specifications.
Q: Why did our product specifications ask for this?
A: Because the company that we are writing the software for had a requirement that the software works this way.
Q: Why did that company we are contracting for add that as a requirement?
A: Because their users need to do :thing:
Q: Why do the users need to do :thing:?
A: Because they are trying to accomplish :xyz:
Q: Why do they need to accomplish :xyz:
A: Because they save money by doing :abc:
Q: Why did they choose :xyz: to solve :abc:?
A: ... good question.
Q: What could they do instead?
A: ... now that I think about it, there's a ton of options! Maybe one of them works better?
With practice, you will start knowing which specific "why" questions to ask, and which to focus on. You will also learn to start deeper down the chain, and be less mechanical in your approach.
This is no longer just about ensuring that the product matches the specifications that the dev, pm, customer, or end user provided. It also helps determine if the solution you are providing is the highest quality solution that your team could provide.
A hidden requirement of this is that you must learn that half your job as a tester is to ask questions all the time. You might think that your team mates will be annoyed at this, but hopefully I've shown that it is both crucial to your development, and the quality of the product you are testing. Smart and curious teammates who care about the product (who aren't busy and frustrated) will love your questions.
#brett :
Suppose you have the system with you, which you want to test. Now the main thing that comes into picture is make sure you have the test scenario or test plan. Once you have that, then for you it becomes very much clear about how and what to test about the system.
Once you have test plan then your vision becomes clear regarding what all is expected and what all is something unexpected. For unexpected behavior you can recheck once and file an issue, if you think that that is not correct. I had given you answer in a general case. if you have a real world scrnario, then it may be really helpful to provide guidelines on that.
I've searched for a while, but I can't find anything related on Google or here.
Me and some friends were debating starting a company, so I figure it might be good to do a quick pilot project to see how well we can work together. We have a designer who can do HTML, CSS and Flash, enjoys doing art, but doesn't like to do HTML and CSS... And 2 programmers that are willing to do anything.
My question is, from an experienced site builder's perspective, what steps do we do - in chronological order - to properly handle a website? Does the designer design the look and feel of the site, then the programmers fill in the gaps with functionality? Or do the programmers create a "mock-up" of the site with most of the functionality, then the designer spices it up? Or is it more of a back-and-forth process?
I just want to know how a professional normally handles it.
Update:
A recap taking some of the notes from each post.
Step 1: Define requirements. What will your site/application do?
Step 2: Use cases. Who will use the application, and what will they do with it? This doesn't have to be done with a bunch of crazy UML diagrams, just use whatever visual aids you think work best for you. Find a CMS vendor, or a search vendor, or both. While planning, maybe do some competitor analysis, and see how those in similar fields have done theirs.
Step 3: Visual proof-of-concept. This is done by your designer, NOT your programmers... Programmers are notoriously bad at UI. Use an image program like Photoshop, not an HTML editor. Leave it fluid and simple at first. Select the three-color theme for the site (two primaries and an accent.) Get a sense of how you want to lay things out, keeping in mind the chosen CMS and/or search functionality. Focus hard on usability, add pizzaz later. Turn the created concept into JPEG mock-ups, or create a staging site to allow the client to view the work. A staging site will allow for future releases to be tested prior to moving it to production.
Step 4: Once the site is conceptualized by your designers, have your HTML/CSS developer turn it into markup. He/she should shoot for XHTML compliance and test on as many major browsers as you can. Also a good time to set up versioning/bug tracking/management systems, to keep track of changes, bugs, and feedback.
Step 5: Have your programmers start turning your requirements into software. This can and should be done in parallel with Step 4- there's no reason they can't be coding up the major pieces and writing tests while the UI is designed and developed.
Step 6: Marry up the final UI design with the code. Test, Test, Test!!
Step 7: Display end result to client, and get client sign-off.
Step 8: Deploy the site to production.
Rinse, Repeat...
Step 1: Define requirements. What will your site/application do?
Step 2: Use cases. Who will use the application, and what will they do with it? This doesn't have to be done with a bunch of crazy UML diagrams, just use whatever visual aids you think work best for you.
Step 3: Visual proof-of-concept. This is done by your designer, NOT your programmers. Use an image program like Photoshop, not an HTML editor. Leave it fluid and simple at first. Select the three-color theme for the site (two primaries and an accent.) Get a sense of how you want to lay things out. Focus hard on usability, add pizzaz later.
Step 4: Once the site is conceptualized by your designers, have your HTML/CSS developer turn it into markup. He/she should shoot for XHTML compliance and test on as many major browsers as you can.
Step 5: Have your programmers start turning your requirements into software. This can and should be done in parallel with Step 4- there's no reason they can't be coding up the major pieces and writing tests while the UI is designed and developed.
Step 6: Marry up the final UI design with the code. Test, Test, Test!!
Rinse, Repeat...
There is no one universal way. Every shop does it differently. Hence, a warning: gross generalizations follow.
Web development typically consists of much shorter release cycles, because it's so simple to push out a release, compared to client-side software. Thus the more "agile" methods are more frequently used than the "waterfall" models encountered in developing client software.
Figure out what, exactly, you're building.
Take care of all the legal stuff (e.g. what business entity you'll be forming, how will each team member be compensated for their work, will there be health benefits, etc).
Mockups. I suggest having the designers do the mockups since programmers are notoriously bad at UI design.
Set up some sort of bug tracking / case management system so that you have a centralized place for all your feature requests and bug reports.
Start coding.
Once you have a simple version of your app, get some people to test it out to make sure you're on the right path.
???
Profit!
As a first step, I'd recommend doing a bit of up-front design using an approach such as paper prototyping, to lock down what it is you want your website to do, and roughly how you want it to look.
Next up, read up on the Agile approach to software development and see if you like the sound of what it suggests. It tends to work best with smaller, well-motivated teams.
Figure out the minimum amount of functionality you can create that you can deliver as a product so that you can get user feedback as soon as possibly. Then expect to iteratively add functionality to the product over time.
The Web Style Guide provides a pretty detailed overview of the process.
You should mix and match the lists provided here for your needs.
I just want to make sure you know one thing...
Customers are "stoopid" when it comes to web design.
You will have to claw, scrape, drag, gnash, rip, and extricate every requirement from their naive little souls. If you fail to do so? Guess who gets the blame?
The road you now look down is a hard one filled with competition, stress, and risk. It requires endurance, faith, patience, and the ability to eat ramen 5 of 7 days a week.
To add (or repeat) Dave Swersky's list.
Gather requirements from clients
Do some competitor analysis. Gather
screen shots of competitor sites.
Build a sitemap /wireframe - What is
the structure/content of the site?
Get designers to create JPG mockups.
They may use the screen shots for
"inspiration"
Get feedback from
clients based on JPEG's
Create HTML
mockups from JPEG's
Get feedback
from clients. Go back to step 4 if
necessary
Implement HTML using
technology of choice
Unit test the site
UAT and obtain sign off.
Deploy to live
client feedback is critical, they should be involved in every step to ensure a successful implementation.
Hope this helps
In addition to the steps outlined in other answers, I'd add this (to be added somewhere near the end of the "cycle"):
x. Once you have a more or less end to end solution, set up a staging site.
y. Get client sign off on staging site.
z. Deploy to production site.
Celebrate! But not too hard, there's almost always going to be a few iterations of changes, because users rarely know exactly what they really want the first time around.
So, when (not if), the client asks for changes, you can work on the changes and promote them to the staging site first! This is important because a) it gives clients a chance to preview changes before the whole world sees them b) if the integrity of the data on the production site is important, you can hopefully weed out any issues on the staging site before they impact production data.
Just to give something on the other side of the coin. Where I work, we have for the past couple of years, worked on a redesign of the company's website. Here are some highlights of the process:
Identify vendors for various functions that will be needed. In this case that meant finding a Content Management System vendor as well as a Search vendor.
Get a new design for the site that can be applied to what was selected in the first step.
Using system integrators and in-house developers, start to build some of the functionality for the site and take the flexible, customizable software in 1 and make it useful for the organization. Note that this is where a couple of years have been spent getting this working and some business decisions ironed out.
Release a preview site to verify functionality and fix bugs, add enhancements as needed.
Note that in your case you may not have the same budget but there are various CMS frameworks out there to select as well as how much integration do you want to have for the site? Does it have to talk to a half-dozen different systems? In the case I mentioned above there are CRM integrations, ESB integrations, search integrations, and translation integrations to give a few examples of where things had to be wired up correctly.
In response to the comment, be sure you and the client know what is meant by "simple" as if there is any e-commerce functionality, forums, or personalization these are examples where it can be important to know what is needed now and have an idea of what is needed down the road as there can likely be a ton of things that customers may want but you have to figure out some of the nitty-gritty details at points in the future. For example, some people may think that Google is simple, and from an end-user perspective it is though how many computers does Google have running how many different applications doing how much processing 24/7? Quite a bit, I'd imagine. Simple is good, but sometimes making something look simple can be incredibly hard to do.
This question already has answers here:
Closed 12 years ago.
Possible Duplicate:
Human factors design (meeting psychological needs in UI design)
What should a developer know about user interface design, usability and less technical aspects of human computer interaction?
What knowledge of usage scenarios, user behavior patterns and the psychology of user to computer interaction should we embrace to design effective software that helps users solve their problems in a natural and uncomplicated way without building barriers and creating obstacles?
There is much more to design of software than building the architecture, implementing the requirements and creating a nice-looking interface. A beautiful interface may not necessarily be useful and effective, and vice versa, an ugly software utility can become a favorite tool for many users. What at least basic knowledge should a decent developer or designer have to smooth the user experience?
Please focus on one issue per answer, describe a problem, bring examples, how the user experience is impaired and what are the ways to address the situation.
I will start:
PROBLEM: Interfaces with lots of controls and options immediately on one screen can be overwhelming to users. They will have to waste time looking through all of them trying to locate the one option they need. They'll also get distracted in the process, see one more feature, go there to learn about it and maybe read help to see if it can solve their problems, then another one and so on until they are completely lost.
EXAMPLE: As a good example I will cite the Microsoft Word (as well as other Office applications) of pre-2007 version. The sheer amount of menus and options has always scared me. I managed to remember where were the options I needed most often but that's it. Everything extra, I tend to google for things I need to learn where this particular feature is located in the forest of options.
SOLUTION: Hide out all extra options behind a few menus and submenus logically structured for the user to be able to locate them through the process of logical thinking. The 2007 redesign has obviously taken the problem into account by grouping the options into tabs. I found many new options I needed without googling but just by thinking where it could belong and looking there. Not that it has always worked, but the improvement can be felt.
Now, what are your ideas?
Useful and effective interfaces are beautiful. Look at them as a UI designer, not as an art major. :-)
Simplicity; as few choices as can accomplish the needs.
Convention; follow patterns the users are already familiar with.
Observation; watch the users, and smooth the places they have problems.
Gentleness; write human-readable errors. Don't upset the users.
Consistency; do things the same way everywhere in the application. Have one person write all of your text, or write a standard that text must meet.
Learn to listen.
Users will tell what they want but not in the words that you're used to. Socialize, sit down, take your time and listen. Watch them work, ask questions. Bring up some ideas "How would you like...?" and listen to the replies. Don't assume that something would be better for them, ask them. Don't force them down a certain path because it's more simple to code.
Interfaces with lots of controls and
options immediately on one screen can
be overwhelming to users.
GMail has this slogan "Search, don't sort". The same principle can be applied to user interfaces. As you mentioned, users are already doing this themselves by googling for features.
Now the next step is to build support for feature search right into the application. Hit a keyboard shortcut, type a few keywords, and click on the feature you want to use. The IDE Insight feature in the upcoming RAD Studio 2010 does exactly that.
Problem: user interfaces often don't have a 1-to-1 correspondence to the domain model:
There are communication problems
because programmers talk about the
hidden domain model while users talk
about the GUI.
There are maintenance problems
because users are constrained by the
task-based user interface. They regularly need
to ask for "a new screen to do this" even
if the domain model may already
support it.
Solution: the naked objects architectural design pattern. To take this to the extreme you might even generate the GUI automatically from the domain model.
I know the question is a bit old, but I'm surprised to see that no one mentioned Joel Spolsky's excellent article : User Interface Design For Programmers. It's definitely something every developer should read. There are no especially brilliant or original ideas in it, it's mostly common sense, but it did open my eyes on some not so obvious points...
I suggest reading "The Design of Everyday Things" by Donald Norman.
I use to think asthetics were useless until I tried to sell my house. Sturdy foundation, 3 brms, 2 baths, 2 car garage, fenced yard, blah, blah blah - until I got rid of the stink from my 3 dogs nobody would touch it.
The more visually pleasing the app/site is, the more chance it will get used. Now a user will give it a try and determine if it does anything they want. Finally, how usable is it? This is a point when you will probably get more feedback.
Just like the house: get rid of the clutter, clean everything, start with a general color pallette and let the user add the crazy colors if the want them.
If you really want your eyes opened, take a course in Human Factors Engineering.
I have worked at a pharmaceutical company for the past two years and I think that the design of the interface is nearly as important as the functionality. Watching users struggle with old complicated legacy code is the primary reason for re-designing it. Functionality is seldom the primary reason for redeveloping code or replacing it.
Usability studies
Watching people use your code
Extreme programming (Delivering preview code intermittently throughout design process)
Are all essential to delivering code that not only meets the users needs but makes them happy and productive. At the end of the day, programs will only be used if they make you happy and productive.
Closed. This question is opinion-based. It is not currently accepting answers.
Want to improve this question? Update the question so it can be answered with facts and citations by editing this post.
Closed 4 years ago.
Improve this question
We're neck deep in a project right now, schedules are tight (but reasonable). Our general strategy is to get a strong beta done, release it for testing, and get feedback from our testers.
Quite frequently, we're being hit by small things that spiral into long, time-costing discussions. They all boil down to one thing: While we know what features we need, we are having trouble with the little details, things like 'where should this message go' and 'do they need this feedback immediately, or will it break their flow, so we should hold off'?
These are all things that our testers SHOULD catch, but
a) Each 'low priority' bug like this drains time from critical issues
b) We want to have as strong a product as possible
and
c) Even the best testing group will miss things from time to time.
We use our product, and we know how our users use the old version...but we're all at a loss as to how to think like a user when we try to use the new version (which has significant graphical as well as underlying changes).
edit - a bit more background:
We're writing a web app used by a widely-distributed base of users. Our app is a big part of their jobs, but not the biggest (and, of course, we only matter to them when it doesn't work). Getting actual users in to use our product is difficult, as we're geographically distant from the nearest location that serves as an end user (We're in Ohio, and I think the nearest location we serve is 3+ hours away).
The closest we can get is our Customer Service team (who have been a big help, really) but they don't really think like the users either. They also serve as our testers (it really motivates them to find bugs when they know that any they DON'T find may mean a big upswing in number of calls). We've had three (of about 12 total) customer service reps back here most of the week doing some preliminary testing...they've gotten involved in the discussions as well.
Watching someone using the app is a huge benefit to me. Possibly someone who is not entirely familiar with it.
Seeing how they try to navigate, how they try to enter information or size windows. Things we take for granted after creating/running the app hour after hour, day after day.
Users will always try and do things you never expected and watching them in action might bring to light how you can change something that might have seemed minor, but really makes a big impact on them.
Read Don't make me think.
Speaking generally, you can't. There's not any way you can turn off the "programmer" part of your brain and think like a user.
And you're right about (c), testing groups don't necessarily catch all the bugs. But the best thing you can do is get a testing group comprised of real, honest-to-goodness end users, and value their feedback. Draw further conclusions from their general comments.
If you want to know how your users will see your system, the closest you can get is usability testing with real users. Everything else is just heuristics and experience, and is also subject to error. There's no such thing as a bug-free product, but you should be able to get a "strong" product with usability testing.
Buy a cheap, easy to use video camera and record your testers using the app. Even better, get some people unfamiliar with the app. to use it and video them. It's relatively cheap, and you'd be surprised what it will highlight.
I like policy of "eating your own dog food"("http://en.wikipedia.org/wiki/Eat_one's_own_dog_food). It brings you one step closer, because you become a user, although you might think like one.
Try to use your app when you are very hurry (e.g. you have someone who waits for a dinner).
You will see all this little things because you have to wait, you have to go back to the mouse of the keyboard, etc.
And also, make your wife use it. Or your mother.
Another useful test : help someone to use it, by phone. If he can't find the button with your directions, that's probably a bug.
The important thing is to get enough information that you yourself can become a "user". Once you do that you can answer most questions yourself.
The way I always do this is to go talk with them about what they need to do, what they typically do, and how they use their current tools to do it. Then (very important) sit with them while they do it. Make sure you get on with them well enough that you can come back to them with questions about how they handle edge cases you think of later (often the answer will be the appalling "we go around the system manually for that").
I will almost always notice something they are doing that is a royal PITA that they didn't bring up because they are used to having to do that and don't know any better. I will always notice that their %90 typical workflow isn't the easiest workflow the tools provide.
You can't really rely on plain old-fashioned requirements gathering by itself, because that is asking them to think like a developer. They generally don't know what is possible to do with your software, what is easy, and what is hard. Also they typically have no clue on GUI design principles. If you ask them for design input they will just tell you to put any new control on their favorite page, until the thing looks like a 747 control panel.
The problem is often that even the users don't know what they want until they are actually working with the software. Sometimes, a small oversight can be a big usability problem, sometimes a well thought out function that was requested by many users sees only little use.
My suggestions to decrease the risk of not implementing the right usability features:
Take a look at users actually doing their day to day work. Even if they use another software or no software at all. You will be able to determine the artifacts they often need to get their job done. You will see what data they frequently need. Concentrate on the artifacts, data and workflows most used. They should be the most usable. Exotic workflows may be a bit more time consuming for the users than often used workflows.
Use working prototypes of the GUI to let users work through a realistic workflow. Watch them and note what hinders them and what works well. Adjust your prototypes accordingly.
If an issue arises in an often-used part of your software, it is time to discuss it now and in details. If the issue concerns a seldom used part, make it a low priority issue and discuss it if you have the time. If issues or suggestions are low priority, they should stay low priority. If you can't determine if solution A or solution B is the best, don't run in circles with the same arguments over and over. Just implement one of the solutions and see if the beta testers like it. The worst thing you could do is waste time over tiny issues, while big issues need to be fixed.
A software will never be perfect, because the viewpoints of users differ. Some users will think that a minor problem breaks the whole application. Others will live with even severe usability issues. People tend to lend their ear to those who argue the loudest. Get to know your users to separate the "loud" issues from the important ones. It takes experience to do this, and sometimes you will make wrong decisions, but there is no perfect way, only one of steady improvement.
If you can, set aside a certain amount of usability development resources for the rollout phase of your software. Usability issues will arise when people start working with it in a real production environment. Sometimes it is not important to present the perfect software, but to solve issues quickly as they arise.
The flippant (yet somewhat accurate) answer to how to think like a user is put a knitting needle in your ear and push really hard.
The longer response is that we as programmers are not normal and I mean that in a good way. I scratch my head at the number of people who still run executables they receive from strangers in emails and then wonder how their computer got infected.
Any group of people will in time develop their own jargon, conventions, practices and expectations. As a programmer you will expect different things from an operating system than Joe User will. This is natural, to be expected yet hard to work around.
It's also why BAs (business analysts) exist. They typically come from a business or testing background and don't think like programmers. They are your link to the users.
Really though, you should be talking to your users. There's no poitn debating what users do. Just drag a few in and see what they do.
A usability test group will help.. tests not focused on discovering bugs, but on the learning curve of the new design, made by a group of users, not programmers.
I treat all users like malicious idiots.
Malicious because I assume all users are going to try and break my code, do stuff that is not allowed, avoid typing in valid data, and will do anything in their power to make my life hell.
Idiots because again I can't assume they will understand simple stuff like phone formats, will run away screaming if presented to many choices, and will not make any leap of faith on complicated instructions. The goal is to hold their hand the entire way.
At the same time, its important to make sure the user doesn't realize you think they're an idiot.
To think like a user, be one. But are these actually bugs that your testers are reporting? Or are they "enhancement requests"? If the software behaves as designed per requirements and they just don't like the way it operates, that's not a bug. That's a failure of requirements and design. Make it work, make it rock solid, make it easy to change and you'll be able to make it what your users want.
I see some good suggestions here, especially observing people trying to use you app. One thing I would suggest is to look at the order in which things are presented to the user on paper forms (if they use these to do data entry from) and make the final data entry page mimic that order as closely as possible. So many data entry errors (and loss of data entry speed) are from them having to jump around on the page and losing their place. I did some work for a political campaign this year and in every case, entering data was made much more difficult because the computer screen did things in a differnt order than the paper inputs. This is particularly important if the form is one that can't be changed (like a voter registration form, a campaign has to use what the state provides) to match the computer screen. ALso be consistent from screen to screen if possible. If it is first Name last name on one form, making it last name first name on the next will confuse people and guanteee data entry errors.
If you are truly interested in understanding users though I strongly suggest taking a course in Human factors engineering. It is an enlightening experience.
The 'right' way to do this is to prototype (or mock up) your new interface features, and watch your users try to use them. Nothing is as enlightening as seeing a real user try to use a new feature.
Unfortunately, given most projects time and resources, this is not possible. If that is the position you are in I would recommend you discuss in the team who has the best grasp of usability, and then make them responsible for usability decisions - but that person will need to regularly consult real users to make sure his/her ideas are consistent with what the users want.
I'd suggest doing some form of usability testing; I've participated in such in the past, and found them quite useful.
If you were writing a ticketing system, for example, bring up tasks, and ask questions like "how would you update this ticket" or "what do you expect to happen if this button is clicked".
You don't necessarily need a full application, either, in some places screen shots can be used.
You could take the TDD/BDD approach and get the users involved before beta, having them work with you on refining requirements as you write your unit tests. We're beginning to incorporate some of those trends into our current project, and we're seeing fewer bugs in the areas where we have involved the users earlier.
There is no "think like a user" technique, get your hands on someone who knows nothing of the project and throw what you have done at them.
It's the only way to see how the look + feel + functionality present themselves to the end user.
Once you shocked that person who knew nothing of the product, listen to all of their idiotic (or so you think they are) complaints, fix them, arrange every silly cosmetic thing they point out (either by fixing the UI or by improving whichever documentation you had)..
and after you have satisfied the person you chose to look at your app from zero knowledge on the subject first round, pick another ...and another... until they stop being shocked when they see it, and they don't get stuck on.. "ok.. what does this do?" kind of phases.
You (as a member of the project, be it the project manager, developer, etc) will never think like a user is my answer to that question.
Old saying: You can make something "fool proof" but you can't make it "Damn-fool proof".
Additionally: When you make something "idiot proof" the world invents a better idiot.
Other than that, I agree with what everyone else said.
Ask someone with absolutely no knowledge, insight or programming experience to use the program and try to figure out every function of the program.
People who would NEVER use such a program are most likely to find bugs.
See it as a new Safari user (or FF) who tries to put the URL inside the search field...
As a programmer you guess no-one would be that stupid (or, well.. unknowing), but people actually sometimes find themselves in these situations. As a programmer, we miss these things.
What are your best usability testing tips?
I need quick & cheap.
While aimed at web design, Steve Krug's excellent "Don't Make Me Think: A Common Sense Approach To Web Usability" features (in the second edition, at least), a great chapter entitled "Usability Testing On 10 Cents A Day", which I think is applicable to a much wider range of platforms.
The chapter specifically deals with usability testing done quick and dirty, in a low-budget (no money and/or no time) environment, and illustrates some of the most important considerations for getting an initial "feel" of the thing.
Some of the points I like in particular are:
You don't need to test with a huge number of people (a sentiment also echoed by Jakob Nielsen)
A live reaction is worth a lot; if possible, make sure the developers can see the reaction (perhaps using a video camera and a TV; it doesn't need to be an expensive one)
Testing a few people early is better than a lot later
Joel Spolsky is known for advocating "hallway usability testing", where you grab a few passing users and ask them to complete some simple task. Partly inspired by the "a few users yield the bulk of the results" philosophy, it's also relatively convenient and inexpensive, and can be done every so often.
Ask someone non-techy and unfamiliar with it to use it.
The archetypal non-technical user, one's elderly and scatterbrained maiden aunt. Invoked in discussions of usability for people who are not hackers and geeks; one sees references to the “Aunt Tillie test”.
The Aunt Tilly Test (Probably needs a better name in today's day and age, but that's what it's referred to)
You have to watch people use your application. If you work in a reasonable sized company, do some 'hallway testing'. Pull someone who is walking past your door into the room and say something like, 'Could you please run the payroll on this system for the next month? It should only take two minutes'.
Hopefully they won't have any problems and it shouldn't be too much of an imposition on the people walking past. Fix up any hiccups or smooth over any processes that are unnecessarily complex and repeat. A lot.
Also, make sure you know what usability is and how to achieve it. If you haven't already, check out The Design of Everyday Things.
Some good tips here.
One mistake I made earlier on in my career was turning the usability test into a teaching exercise. I'd spend a fair amount of time explaining how to use the app rather than letting the user figure that out. It taught me a lot about whether my applications were easy or hard to use by how puzzled they got trying to use the app.
One thing I did was put together a very simple scenario of what I wanted the user to do and then let them go do it. It didn't have step-by-step instruction ("click the A button, then click the B button") but instead it said things like "create a new account" and "make a deposit". From that, the user got to 'explore' my application and I got to see how easy it was to use.
Anyhow, that was pretty cheap and quite enlightening to me.
Quick and cheap won't cut it. You have to invest in a user experience framework, starting with defining clear goals for your app or website. I know it's not what people want to hear, but after supervising and watching a lot of user testing over the years, using Nielsen's discount usability methods is just not enough in most cases. Sure, if your design really sucks and have made huge usability errors, quick and dirty will get 80% of the crud out of the system. But, if you want long-term, quality usability and user experience, you must start with a good design team. And I don't mean good graphic designers, but good Information Architects, interaction designers, XHTML/CSS coders, and even Web Analytics specialists who will make sure your site/app is measurable with clear goals and metrics. I know, it's a lot of $$$, but if you are serious with your business (as I am sure most of us are), we need to get real and invest upfront instead of trying to figure out what went wrong once the whole thing is online.
Another topic to research is Heuristics for usability. This can give you general tips to follow. Here's another use of heuristics
If you don't know where to begin, start small. Sit a friend down at your computer. Explain that you want them to accomplish a task using software, and watch everything they do.
It helps to remain silent while they are actually working. Write everything down. "John spent 15 seconds looking at the screen before acting. He moused over the top nav to see if it contained popup menus. He first clicked "About Us" even though it wasn't central to his task." Etc.
Then use the knowledge you gain from this to help you design more elaborate tests. Tests with different users from different knowledge realms. More elaborate tasks and more of them.
Film them. A web-cam mounted on the monitor is a good way to capture where their eyes are moving. A video recorder coming over their shoulder at 45 degrees is a good way to capture an overview. Bonus points if you can time-sync the two. Don't worry if you can't do it all. Do what you can do.
Don't plan your test as if it's the last one you'll ever need and you want to get it perfect. There is no perfect. The only thing approaching perfection is many iteration and much repetition. You can only approach 100% confidence as the number of tests approaches the number of actual users of your software. Usually nobody even gets close to this number, but everybody should be trying to.
And don't forget to re-test people after you incorporated the improvement you saw were needed. Same people, different people, either is ok.
Do what you can do. Don't lament what you can't do. Only lament what you could have tested but didn't.
I am answering very late but I was thinking about asking a similar questions about some ideas. Maybe it is better to keep everything in this question.
I would say that:
Do not teach people about your app. Let them have fresh eyes.
Ask them to make some tasks and record their actions with a tool like camstudio http://camstudio.org/
After the test, ask them to answer so simple questions. Here is my list:
What was your first feeling when you accessed the app?
Can you define the key concepts that are used by the app?
What are the top-3 positive things about the application?
What are the top-3 negative things about the application?
What do you think about these ideas?