I'm just not getting it, I'm using Excel 2003 and am totally confused as I'm just not getting it ...can anyone help? I need to check that named value with a number of column headings on the active sheet and then insert a column to the left of the column holding the matching text. I'm sure that bit is very hard - but I'm not even able to get started here...
Well, to get your named value column (which I presume is a named range...), you would use:
ActiveWorkbook.Sheets("mySheet").Range("myRange").Column
So you could do something like:
myNamedRange = ActiveWorkbook.Sheets("mySheet").Range("myNamedRange").Value
myCol = ActiveWorkbook.Sheets("myMainSheet").Rows("1:1").Find(myNamedRange).Column
ActiveWorkbook.Sheets("myMainSheet").Cells(1, myCol).EntireColumn.Insert
Related
I have two excel WORKBOOK (WB)
In excel WB 1, I have column for student IDs and Advisor name.
In excel WB 2, I have IDs to be matched to WB 1 IDs if the Advisor name is "John" to show "TRUE' in a column in WB2.
Can you pls tell me what are the formulas to try AND EXPLAIN THE COMPONENTS OF THE FORMULA?
aTTACHED IS THE SCREENSHOT OF DATA.
pLEASE NOTE ITS IN DIFFERENT EXCEL WORKBOOKS NOT SHEETS.
Taking your provided formula I will run you through the minor change that will make this work:
=IF(ISNUMBER(MATCH(C7:C17&"John",'[wORKBOOK1 NAME]SHEET1'!$A$2:$A$13&'[wORKBOOK1 NAME]SHEET1'!$B$2:$B$13,0)),"True","False")
This of course is assuming that the Forenames are in $B$2:$B$13...
What this is doing is simply forming a string value of the ID with the Forname stuck onto the back of it. MATCH will reference an array of values that it creates from the criteria within itself - the ID with the Forename.
The match formula will work in the same way, returning an integer representing the index location within the array when the match is found.
I will point out that the formula does not accept an array for the first argument, so currently only the first cell is being searched... You will want to update the formula and perhaps have this as a column checking each individual ID:
=IF(ISNUMBER(MATCH(C7&"John",'[wORKBOOK1 NAME]SHEET1'!$A$2:$A$13&'[wORKBOOK1 NAME]SHEET1'!$B$2:$B$13,0)),"True","False")
If you wanted this as just one formula it gets a bit more complicated as you must form an array using an if statement and Evaluate against that array:
=IF(ISNUMBER(MATCH(1,IF(C7:C17&"John"='[wORKBOOK1 NAME]SHEET1'!$A$2:$A$13&'[wORKBOOK1 NAME]SHEET1'!$B$2:$B$13,1,0),0)),"True","False")
This must be entered as an array formula (While still in the formula bar hit Ctrl + Shift + Enter)
The if statement will check for the match and build a new binary array (1 for a match and 0 for no match), the MATCH formula then is simply checking if a match is found in that new array by searching for 1.
Anyone,
I've chatted with and called excel customer service with no luck. I used the formula builder (please see attached screenshot) to make sure each element of the formula is correct and returns the value for the criteria I'm trying to reference.
Everything is accurate, but it returns a value of 0. When I do the same thing in the actual sheet the data is stored in (and click a criteria cell within the criteria range) it returns the accurate value?! I'm not sure why it won't work on the other sheet. The values I am using to select are dynamic and change with a drop down. I have another, advanced, workbook (I did not create) that does the same thing and completes an even more complicated formula, but actually works so I'm not sure why this is returning a 0 value.
Photos and code/syntax: Dynamic Selection, Example 2 of it working, Example 1 of it working, Formula Builder, CountIFs, Advanced Spreadsheet working, VLOOKUP
=SUMIFS('GFEBS Pull'!Q:Q,'GFEBS Pull'!G:G,FMCOP!$C$20,'GFEBS Pull'!H:H,FMCOP!B23)
or:
=SUMIFS('GFEBS Pull'!Q:Q,'GFEBS Pull'!G:G,'FMCOP'!$C$20,'GFEBS Pull'!H:H,'FMCOP'!B23)
When I type ' around FMCOP sheet name, they disappear? I've also tried to lock the columns on the 'GFEBS Pull' sheet with no luck. Cell B23 is not locked because I'm going to copy the formula down to reference other cells. Any help is appreciated!
In this screenshot you can clearly see that both FMCOP!C20 ansd FMCOP!B23 have prefacing spaces; e.g. " HHC".
Since " HHC" will never match "HHC", fix the data returned from 'the lower table in the same screenshot'.
A Text-to-Columns, Fixed Width, Finish should do this. You could adjust the original formula like,
=SUMIFS('GFEBS Pull'!Q:Q, 'GFEBS Pull'!G:G, TRIM(FMCOP!$C$20), 'GFEBS Pull'!H:H, TRIM(FMCOP!B23))
I would caution against the latter 'bandaid' fix. Fix the original data; do not apply bandaids on-the-fly.
i need to get multiple column names (header) in table associated with particular value in to a cell
as i explained, i need to get the heading names corresponding to value "n" to column E.
i used the formula
=INDEX((A$1:D$1),MATCH("n",A2:D2,0))
here. but it only give one column name.
i am open to vba scripts also. but i think it doesn't need vba. just improve the the above formula, may be. i tried and failed. any help. thank you guys
if you are really "open" to vba, I'll use one simple UDF like:
Function HeatherNames(rg As Range, rf As String) As String
For Each cell In rg
If cell = rf Then HeatherNames = HeatherNames & Cells(1, cell.Column).Value & "-"
Next cell
HeatherNames = Left(HeatherNames, Len(HeatherNames) - 1)
End Function
you can use it in the column E `=HeatherNames(A2:D2;"n") now you can select the arg.1 (range) and type (or referring to another cell) the arg.2
Assuming you have Excel 2010 or later, in E2:
=IF(COLUMNS($A:A)>COUNTIF($A2:$D2,"n"),"",INDEX($1:$1,AGGREGATE(15,6,COLUMN($A2:$D2)/($A2:$D2="n"),COLUMNS($A:A))))
Copy to the right and down as required.
It would actually be slightly more efficient (and certainly if your dataset in reality is quite large) to have the initial IF clause held within its own cell, such that it is calculated for each row only once, rather than for each instance of the formula within that row. So a better set-up would be, in E2:
=COUNTIF($A2:$D2,"n")
copied down. Then, in F2:
=IF(COLUMNS($A:A)>$E2,"",INDEX($1:$1,AGGREGATE(15,6,COLUMN($A2:$D2)/($A2:$D2="n"),COLUMNS($A:A))))
copied to the right and down again.
Regards
I have multiple sheets of data and I want to make it in one sheet (All of them are in the same workbook). Link to the excel file.
I tried to use Hlookup function in excel file, something like below:
=HLOOKUP("University",Sheet1!$A$1:$G$2, 2, FALSE).
But, since I have more than 100 sheets of data, I want to find a way to drag the function and auto generate the function below the 2nd row. I have tried to use indirect function by setting a reference column in front as below but cannot deal with it.
=HLOOKUP("University", 'INDIRECT(A3)'!$A$1:$G$2, 2, FALSE)
My next option is VB code. But, I am new to VB. Anybody can help on it?
Place your individual sheet names in column H of the Summary sheet and the row number in column I (as helper columns) and write this formula in cell A2 of the summary sheet.
=IFERROR(HLOOKUP(A$1,INDIRECT($H2&"!A1:G"&$I2),$I2,0),)
and drag to column F and down for as many sheet rows combos you have. I used 10 rows but you can obviously make it longer or shorter as neeed.
When you are done you can filter on 0 in column A and remove any lines with no data.
If your sheet names have spaces in them, you'll need to adjust the INDIRECT formula to this:
INDIRECT("'"&$H2&"'!A1:G"&$I2)
best way would be "defined names" + INDIRECT + HLOOKUP (or LOOKUP) like:
defined names
name: SList
formula: =MID(TRANSPOSE(GET.WORKBOOK(1))&T(NOW()),FIND("]",TRANSPOSE(GET.WORKBOOK(1))&T(NOW()))+1,255)
formula in cells: (this in A2 then simply autofill to G2 and thenn everything down) (you'll get a row with 0's between the sheets, which can be filtered out or deleted later (copy/paste values))
=IFERROR(HLOOKUP(A$1,INDIRECT("'"&INDEX(SList,COUNTIF($A$1:$A1,0)+2)&"'!$A:$G"),$H2,0),"")
Set H2 to 2 and for H3: (autofill down from H3)
=MAX(($H2+1)*($A2>0),2)
works perfectly for me LINK
No manual typing of sheetnames or something like that (only Column H:H as helper). Youll get rows's with 0's every time a new sheet is selected which can be filtered out. (or if you copy/paste values also can be deleted)
the +2 at ...st,COUNTIF($A$1:$A1,0)+2)&... simply tells to start with sheet 2 (if summary is the first). You may change it to +1 if you want to lookup starting with the first sheet.
Assuming you already have all 100+ sheet names typed out in column A, this will work whether or not you have spaces in the sheet names:
=HLOOKUP("University", OFFSET(INDIRECT(ADDRESS(1,1,1,1,A2)),0,0,2,7),2,FALSE)
This is code from Excel 2010. All of the code resides within the workbook itself. Information is gathered using internal forms and the code is run.
I have code that retrieves data from a spreadsheet and populates an object with that data. The row number is dynamic as it is dependent on the form input. The column is by the header, not the column number. The following code works perfectly but for two anomalies:
cTank.RowForTankSpecs = rNum
cTank.MP = .Cells(rNum, Range("MP").Column).Value
cTank.Form = .Cells(rNum, Range("formName").Column).Value
cTank.TankProcess = .Cells(rNum, Range("Process").Column).Value
cTank.Location = .Cells(rNum, Range("Location").Column).Value
cTank.TankName = .Cells(rNum, Range("Tanks").Column).Value
cTank.tankID = .Cells(rNum, Range("TankID").Column).Value
First:
The cTank.TankName is retrieving information from a column named "Tanks". That column does not exist. The actual column header is "Tank". But, it is retrieving the correct information. If I change the name to what it really is (Tank), it does not work.
Second:
When the cTank.TankID line is executed, I get the following error on the Range("TankID"):
Runtime Error 1004: Method 'Range' of object '_Global' failed
This one has the appropriate header (column header), but it is not recognizing the range.
I have tried simple things such as changing the order of the code, but it doesn't help. As earlier stated, the other lines work. Later in the program, information is gathered in the same manner but using another worksheet from the same workbook, and none of them are working. I've double checked that strings are strings and integers are integers, etc. I've double checked the column headers match the range names. Nothing seems to jump out at me.
I would appreciate any input you may have on the situation.
Thanks in advance.
Steve
Ok. Being pretty sure my code was correct, I went to the spreadsheet itself. For some reason it was recognizing only certain columns and it was recognizing one of them incorrectly. So I started highlighting the columns that worked and also the columns that didn't. What I noticed was that on the columns that were being recognized, that column header was displayed where the cell location is normally displayed whereas on the columns that were not being recognized, the cell location (i.e. A1, A2, etc.) for the header was being displayed and not the header title itself. The incorrect label was showing up for one of them. As it turns out, the mislabeled column was one that I had used for a form dropdown menu. So, I checked the name manager, and the ones that were working were listed. So anyway, using the name manager, I added named ranges using the headers. Now, when I select the columns, the column header(named range) appears in that window and now, the code works.
Thanks guys for your input. I really appreciate it.
Two things you can do:
Do not use use Range, but as it seems you are using names, use Names("Yourname").Referstorange.
OR
Make sure your names are set up correctly using the Name Manager in Data Ribbon.