I want to show a total inside a toolbar. I put in IB the UILabel on top of the toolbar .
However, when I run the app, the UILabel is totally invisible (but can set values on code fine).
The most bizarre thing is that in other form, all work fine. I don't see why in one form work but not in another...
Any idea in how fix this? Or why is this behaviour happening?
Don't use a UILabel.
Use a UIBarButtonItem. Then set it to style: plain. It looks like a label, but it actually borderless button. This is the general practice of displaying text on a bar.
You can also create UIBarButtonItem with a custom view in code. You are simple "wrapping" the UILabel in a UIBarButtonItem allowing you to add anything you want to a tool bar.
To add in response to comment:
Either way, you make the button "inactive" and it doesn't respond to touches. Even though it is a button, it doesn't appear to be one. This is how Apple expects to add views to a toolbar/navbar as apposed to "float things on top of it". It violates no HIG guidelines, much the opposite, it is a reccomended design technique.
To stop the glow:
Create the button programmatically, make sure it is disabled, add it to the bar, it should then be disabled, but not dim.
In IB, have you tried to select the label and use the "Bring to Font" menu item (under Layout)? It seems like you are trying to do something pretty standard.
When you try to set values, is the label coming up as nil or at address 0x0? It's possible that the label is there, but its text cannot be set because its instance is faulty (not properly connected in IB to the IBOutlet).... Just put a breakpoint on the line where you are trying to set the value(s) for the label, and verify that the label variable is not nil (or 0x0). If it's not, try setting the text and verify on the next line that its text was set properly.
drag a UIButton into your UIToolBar. Then uncheck User Interaction Enables for this button.
Customize your UIButton so that it will look like a UILabel. Hope this will help you.
Related
I have a static NSTextField that overlays a large error message in my OS X app. I'm trying to get it to allow the user to click controls beneath it.
In IB I've unchecked "enabled" and I've checked "Refuses First Responder"
I've also done it in code because that wasn't working:
[largeErrorText setEnabled:NO];
[largeErrorText setRefusesFirstResponder:YES];
Still, it is getting in the way of interacting with the objects below it. Any ideas what else it might be?
The only way I have found to make an object transparent to the click is to subclass that object (in your case the NSTextField) and override the hitTest method returning nil. This way that NSTextField will not respond to the click so the NSView below will respond to the click.
- (NSView*)hitTest:(NSPoint)aPoint
{
return nil;
}
I assume you are describing a scenario like the following image shows:
The inner red rectangle is the frame outline of the NSTextField label, and you're saying that even though you've disabled the text field and set refuses first responder, your clicks do not go through to the NSButton?
This design scenario describes a condition called "Overlapping sibling views". I would generally try to avoid this if at all possible. If you can't, you can get the desired behavior by making sure that the NSTextField label is "behind" all of the other UI objects that you want to be able to interact with. You can do that by selecting the label and choosing Editor > Arrange > Send to Back. That will assure that the button is in front of the text field so that it can properly intercept mouse events.
I am trying to tidy up my UI by consolidating various things in a Tool Bar, and am utterly confused. I am using Interface Builder rather than constructing the controls programmatically, because my UI is fairly simple and not particularly dynamic.
What I did did so far:
Added an empty tool bar.
Dragged two previously existing and working buttons onto the tool bar. They changed their class from UIButton
to UIBarButtonItem, and the inspector now shows them as having no
Sent Actions or Referencing Outlet, but the the previous action &
outlet in the View Controller - responding to taps, setting the
label of the button - still work.
Created a new Button directly
in the tool bar. Wired up its action & outlet by ctrl-drag in the
normal way. The inspector shows the Action and Outlet for this
button as connected, which is nice, but sadly neither of them works.
Clicking the button does not invoke the action; setting the label of
the button does not cause anything to happen on the screen, even
after I tried prodding the tool bar with a setNeedsDisplay.
I'm not sure what to try next. Googling has shown me that I'm not the only person to find using UIToolBar via Interface Bulder difficult and confusing, but I haven't found a solution to my exact problem.
I don't particularly want to resort to creating my entire GUI programmatically just to tidy up a few buttons. Creating all the controls in Interface Builder outside the tool bar, getting them wired up and working, then moving them into the tool bar would presumably also work - but it would be a kludge, and would leave me still none the wiser if anything went wrong later.
Should you try using UIBarButtonItem instead of UIButton? It works for me.
i had a similar issue.
Did you created an extra UITapGestureRecognizer for root view ?
Maybe for something like > When elsewhere than UITextView clicked, resignFirstResponder for all UITextViews !
In my case, on 7.1, that extra UITapGestureRecognizer prevented transfer of event to IBAction of UIBarButtonItem which is inside an UIToolBar.
IBAction was made on Storyboard by Ctrl+Drag.
on 8.1 it was working. Not on 7.1
Read some suggestions to create an extra UIView and putting all visual elements into that extra UIView except UIToolBar
I've got an NSPopover that is shown from interaction with an NSStatusItem. I've blogged about the hacks I needed to do to make input even possible in this situation here: http://blog.brokenrobotllc.com/using-nspopover-with-nsstatusitem
I have an NSTextField inside the NSPopover's content view. When I open the NSPopover, the NSTextField appears as if it is key (the cursor blinks). But, when typing, nothing shows up. If I click the mouse in the field, my input starts showing up there.
I've tried things like invoking NSWindow's makeFirstResponder upon popoverDidShow:. There was no change in behavior from this. Anyone have any ideas here?
My guess is you need to make your app active; try calling
[NSApp activateIgnoringOtherApps:YES];
when you show your popover.
Edit: Of course, I could be wrong. This is all just off the top of my head.
I dont have time right this second to put some sample code, (Ill edit my question tomorrow and add some) but basically what happens is that I have a Window. It works fine usually, but if I use
[myWindow setStyleMask:NSBorderlessWindowMask]
to make it borderless, the NSTextView it contains will stop gaining focus even when you click on it: the ring will never appear, the cursor wont change and the scroll bar will remain gray.
Something else that happens when I make it borderless is that it wont update! I basically have this
[lyricsView setString:someString];
to update the string inside it. The Console marks me no errors, but the string wont appear in the Text View unless I click on it.
All of this stops happening if I remove the line setting the styleMask to Borderless. Any ideas? Suggestions? Comments? Cheers?
Thank You!
Kevin
From the documentation of NSWindow:
The NSWindow implementation returns YES if the window has a title bar or a resize bar, or NO otherwise.
So subclass your window and add this line
-(BOOL)canBecomeKeyWindow
{
return YES;
}
I've got an Custom UIButton. It's got
a "static" background image
a variable text (the Title) which gets set in the code
Now I would like to add an icon (UIImage/UIImageView) inside the button on the left of the text. (I use the indent to move the text slightly to the right). Is there an easy way of adding that icon (and referencing it from code, so I can change it) or would you recommend creating a completely new button e.g. based on a UIView? (e.g. a view, that responds to touches)?
I'm just trying to get a feel for what the best approach would be for this. Any experience?
Two ways:
I prefer doing this by subclassing a UIView and (as you mention) implement the UITouch-responder methods. You're also able to override drawRect: what I really like because it makes your app soooooo much faster!
Since UIButton is a subclass of UIView, you can add a UIImageView to your button by using addSubview:. If you save it in your main-class (#property (...) UIButton *button) you can always access it by calling [self button]. You can also subclass your UIButton and add this #property. That's up to you.
It's totally up to you. However I prefer the first way!