Any way to replace visual studio's usage of msbuild and still get error reporting in the IDE? I think I might want to compile in VS with NAnt or Rake or PowerShell, or something that is just as smart but uses a scripting language instead of XML. My build is fairly straight forward -- find all the .cs and compile them and put the dll in a Debug/ or Release/ etc.
I'd like to add a number of other steps that just seem easier from the command line:
Like hit the server to prime certain caches.
Compile with Closure
Minify CSS
Generate some metrics after build (in a certain config)
Run NUnit (or custom) testing framework and send an email
etc....
However, I'd still like to get the "error on line" feed back inside of the IDE. Is this a possibility?
You could write some extension for Visual Studio (Macro, AddIn, Package, etc.) that can augment Visual Studio to let other build tools run. The simplest form is probably just using "Tools\External Tools.." and add your Build Tool there. As long as you format your "build messages" as described here, the should show up the output window as if they were generated by MSBuild.
However, I don't think it is possible (nor desirable, BTW) to completely replace MSBuild in Visual Studio.
Visual Studio not just executes MSBuild.exe and parses it's output. The integration is very tight and a lot of GUI aspects rely directly on the content of the MSBuild file.
For example, when you change some project properties in the Visual Studio UI, the changes are (eventually) written to the MSBuild file of the project.
Also, there are some performance improvements, for example Visual Studio "replaces", so to say, the call of csc.exe (the C# compiler) from an MSBuild file by using an in-process compiler, which safes some compile time, because less external processes need to be launched (also described in the above mentioned document)
While all this, from a architectural point of view, is quit likely wrapped and encapsulated by some "interfaces" inside Visual Studio, I haven't yet found a way to have those "interfaces" implement something else that, for example, uses NAnt behind.
Anyway, I think even if technically possible, it would not be technically feasible.
For rake, check out Rake Runner extension. You can run the rake tasks from the solution explorer and check the errors and other output in the Output pane. I have little experience developing vs packages so if anyone want to help, the project is open sourced here.
I seem to have missed Day 1 of MsBuild 101. I find myself asking "What does it do, what does it replace, and when do I need it?" since I can just hit F5 and compile my application.
What is the bigger picture I'm missing?
MSBuild is the build platform that enables all build activity in the Visual Studio world.
A better, more practical example would be to state that
The .csproj files (every C# project) are msbuild files
When you hit F5, you basically (oversimplifying) call msbuild.exe and passing in your .csproj file.
MSBuild empowers all the things that make hitting F5 work. From creating the "debug" or "release" folder, to dropping references into the bin\ directory, to invoking CSC ... and everything in between ... MSBuild "powers" all that.
If all you will ever need from a build is the output that F5 gives you, then you know about all you probably need to know about MSBuild.
In most commercial/practical development scenarios, however, there will come a time where there is a need to customize the build process. The most common approach is automating the build process (using either TeamBuild or some homegrown system). You may also need to
create a "packaged" deployment
link to another library outside of your project that is also actively
being developed
publish your build to an FTP and send an email to a customer notifying
them of its availability.
The use of a unified and extensible build platform (ie MSBuild) is what makes all these these possible, while still being part of the build process ... keeping the "build" part of the development pipeline simple and contained.
It's useful when you want do automated builds, and have to implement a build process
The F5 Key Is Not a Build Process and links therein (e.g this) is a good read in that regard.
Also, your Visual Studio project files are msbuild files. If you want to do more advanced stuff when you build (e.g. run a javascript minifier, have more control over autogenerated version identifiers, post processing of files etc.) , you'll have to dig into msbuild.
msbuild is used when you want to build your project from the command line. Whenever you see a continuous integration product that will automatically build your project, it will call msbuild to perform the actual build step.
I think that build servers should have the option to press F5 key in a simpler way than via windows API.
I know this is pretty stale, but here's my take on MSBuild.
It's a scriptable build tool really similar to ANT. They both use XML for configuration, so you'll be able to figure it out fairly quickly. Both have the concept of "Targets" for instance, lots more similarities in thinking, if you know ANT the switch shouldn't be tough.
MSBuild files generated from Visual Studio is really like the generated ANT scripts you get from Eclipse that build your projects, remember your includes and define your dependencies. You can modify them directly for fun and profit.
I like MSBuild, it fixes some of the stuff I find annoying about ANT.
Can anyone explain what advantages there are to using a tool like MSBuild (or NAnt) to build a collection of projects versus running DevEnv.exe from the command-line?
A colleague I had worked with in the past had explained that (at least with older versions of Visual Studio) using DevEnv.exe was much slower than the other techniques, but I haven't read any evidence of that or if that is now a moot point now that starting with 2005, Visual Studio uses MSBuild under the hood.
I know one advantage of using MSBuild allows you to build your projects without requiring Visual Studio to be installed on the build machines, but I wasn't sure if there were others.
One reason is because there's much more to building a product than just compiling it. Tasks such as creating installs, updating version numbers, creating escrows, distributing the final packages, etc. can be much easier because of what these tools (and their extensions) provide.
While you could do all this with regular scripts, using NAnt or MSBuild give you a solid framework for doing all this. There's a lot of community support for both, including additional tasks that can be downloaded (such as the MSBuild Community Tasks Project). Plus, there's support for them in numerous third party and open source products.
If you're just interested in compiling (and not the entire build process), you may find one time saving benefit of MSBuild is the support for building with multiple processors.
The obvious answer from my team is that not everbody has visual studio installed, in particular we do not install Visual Studio onto our build/CI servers.
The prime reason for using an external build tool like NAnt or MsBuild is the ability to automate your build process and thus provide continous feedback on the status of your system. Also they can be used for loads of things besides a "pure" build and that's where you really start to get value from them, it's an extremly valuable thing to be able to build and test your application with a single command.
You can also start adding stuff like collection of metrics, packinging of release binaries and all sorts of nifty stuff like that.
As far as C# goes, devenv.exe 2005 runs the compiler in-proc, which may cause out of memory exceptions for sizable solutions. Msbuild resorts to launching csc.exe process for each project. Projects that don't compile with devenv /build work fine with msbuild. Hope you like this reason.
We are experimenting with switching from DevEnv to a tool (Visual Build Pro) that uses MsBuild under the hood and we got a "Reference required to assembly 'System.Drawing..." error for a project which doesn't need it and which builds fine in Visual Studio.
We have a large system consisting of C#, managed C++, and plain old unmanaged C++ assemblies/dlls. There is C++ code that depends on managed C++ code that depends of C# code that depends of managed C++ code that depends on plain old C++ code (whew!). When we were setting up our automated build environment a few years ago we discovered that MSBuild.exe didn't properly handle all of the dependencies that we have.
Working with Microsoft we were able to solve some of the issues but not all of them. If my memory serves me, we never could get the C# assemblies that depended on managed C++ dlls to build. So we ended up making a custom build script that called devenv.exe from the command line and it worked just fine.
Of course, that was with VS2005, it might be fixed now, but the script is still working so we haven't revisited the issue.
I currently use nant, ccnet (cruise control), svn, mbunit. I use msbuild to do my sln build just because it was simpler to shell out.
Are there any merits to switching my whole build script to MSBuild? I need to be able to run tests, watir style tests, xcopy deploy. Is this easier?
Update: Any compelling features that would cause me to shift from nant to msbuild?
I like MSBuild. One reason is that .csproj files are msbuild files, and building in VS is just like building at the command line. Another reason is the good support from TeamCity which is the CI server I've been using. If you start using MSBuild, and you want to do more custom things in your build process, get the MSBuild Community Tasks. They give you a bunch of nice extra tasks. I haven't used NAnt for several years now, and I haven't regretted it.
Also, as Ruben mentions, there are the SDC Tasks tasks on CodePlex.
For even more fun, there is the MSBuild Extension Pack on CodePlex, which includes a twitter task.
My advice is just the opposite - Avoid MSBuild like the plague. NANT is far far easier to set up your build to do automatic testing, deploy to multiple production environments, integrate with cruisecontrol for an entry environment, integrate with source control. We've gone through so much pain with TFS/MSBuild (Using TFSDeployer, custom powershell scripts, etc) to get it to do what we were able to do with NANT out of the box. Don't waste your time.
The most compelling reason to use MSBuild (at least in .NET 3.5 and beyond) - the build engine can build concurrently.
This means a huge speed up in your builds in you have multiple cores/processors.
Previous to 3.5, MSBuild didnt do parallel builds.
I feel that MSBuild and Nant are fairly comparable. If you are using one of these, I generally wouldn't switch between them unless there was a compelling feature that was missing in the product you had selected.
I personally use MSBuild for any new project, but your mileage may vary.
Hope that helps!
Edit: #ChanChan - #Jon mentions that Nant doesn't build .NET 3.5 applications. This may be enough of a reason to either change, or at least use them in parallel. As I've moved more towards MSBuild, I am probably not the most informed person to highlight any other showstoppers with either technology.
Edit: It appears Nant now builds .NET 3.5 Applications.
NAnt has been around longer, and is a considerably more mature product, and also IMO easier to use. There is a lot of community know-how out there to tap into, and it is also cross-platform, should you be interested in building apps that can run under Mono as well as .NET and Silverlight. Out of the box, it does a whole lot more than MSBuild does. Oh yes, and you can call MSBuild from NAnt (OK, from NAntContrib) :-)
On the negative side, NAnt and its sister project NAntContrib do seem to have stagnated, with the most recent update being late 2007.
The main advantages that I see of MSBuild is that it ships with the .NET Framework, so it's one less product to install; and there is more active development going on (albeit in places to catch up with the older NAnt).
Personally, I find its syntax a little more difficult to pick up, but then I'm sure continued exposure to ti would make things easier.
Conclusion? If you're working with existing NAnt scripts, stick with them, it's not worth the hassle of porting. If you're starting a new project, and you're feeling adventurous, then give MSBuild a go.
We also switched from nant to msbuild. If Your build is pretty standard, then You won't have much problems setting it up, but if You have a lot of specific build tasks, You will have to write custom ms build tasks, as there are way less custom tasks for msbuild.
If you want to display reasonable build results, You will have to mess with custom loggers etc. The whole team build is not as ripe as nant is.
But the real benefit is integration with TFS source control and reporting services. If You are not using TFS as Your source control system, it's not worth it.
Don't switch unless you have a very convincing reason (at least).
NAnt is open source and if it weren't I wouldn't be able to customize our build system, MSBuild is not.
NAnt can easily run MSBuild, I'm not sure about the other way around.
MSBuild scripts are already written for you if you use VS2005 or newer (the project files are MSBuild files.)
If you use NAnt, and you use VS to edit project files, settings and configurations, you'll have to write a converter/sync tool to update your NAnt files from the VS Project files.
#Brad Leach
I generally wouldn't switch between them unless there was a compelling feature that was missing
what are the compelling reasons to use msbuild? are there cons?
So far I'm getting a pretty good, "no don't bother" from your answer.
I think they're relatively comparable both in features and ease of use. Just from being C# based I find msbuild easier to work with than nants, though that's hardly a compelling reason to switch.
What exactly is nant not doing for you? Or are you just hoping there's some cool feature you may be missing out on? :)
One super-nice thing about C# is that if you have the .net framework, you have everything you need to run msbuild. This is fantastic when you are working on large teams / projects and have people/hardware turnover.
Personally I prefer SCons over both of them :)
The main reason I still use nAnt over msbuild for my automated builds is that I have more granular control on my builds. Due to msbuild using the csproj has it's build file, all the source in that project is compiled into one assembly. Which causes me to have a lot of projects in my solution for large projects where I am separating logic. Well with nant, I can arrange my build where I can compile what I want into multiple assemblies from one project.
I like this route, because it keeps me from having to many project files in my solution. I can have one project with folders splitting out the layers and then use nant to build each layer into it's own assembly.
However, I do use both nant and msbuild in conjunction for some build tasks, like building WPF applications. It is just a lot easier to compile a WPF application with the msbuild target within nant.
To end this and the point of my answer is that I like to use them side by side, but when I use msbuild in this configuration, it is usually for straight compiling, not performing any build automation tasks like copying files to a directory, generating the help documentation, or running my unit tests for example.
I'm actually still trying to figure this question out myself, but there is one big bonus for MSBuild here: using the same build file for local continuous integration by calling msbuild.exe directly, while also being able to use VSTS's server-side continuous integration with the same build file (albeit most likely different properties/settings).
i.e. as compared to TeamCity's support for MSBuild scripts, VSTS only supports MSBuild scripts! I've hacked around this in the past by exec'ing NAnt from MSBuild; I've seen others recommend this practice as well as the reverse, but it just seems kludgey to me, so I try not to do it if I can avoid it. So, when you're using "the full Microsoft stack" (VSTS and TFS), I'd suggest just sticking with MSBuild scripts.
Nant has more features out of the box, but MSBuild has a much better fundamental structure (item metadata rocks) which makes it much easier to build reusable MSBuild scripts.
MSBuild takes a while to understand, but once you do it's very nice.
Learning materials:
Inside the Microsoft Build Engine: Using MSBuild and Team Foundation Build
by Sayed Ibrahim Hashimi (Jan, 2009)
Deploying .NET Applications: Learning MSBuild and ClickOnce by Sayed
by Y. Hashimi (Sep, 2008)
I don't see any reason to switch. MsBuild itself locks you into the framework you are using. If you use NAnt, you can use it across many frameworks and shell out to msbuild to actually do the building task for you.
I am a fan of NAnt in this respect, because it decouples you from the framework a little bit.
I have created a framework that puts conventions into automated builds and I built it on NAnt. It's called UppercuT and it is the insanely easy to use Build Framework.
Automated Builds as easy as (1) solution name, (2) source control path, (3) company name for most projects!
http://code.google.com/p/uppercut/
Some good explanations here: UppercuT
MSBuild being integrated with Visual Studio gives programmers less friction to use the build system. It mainly comes down to them only having to go "Build Solution" and it all works, versus having to use Custom Build Steps and other such things, or, worse, forcing developers to build by launching some kind of external script.
Now, I mostly tend to prefer MSBuild over NAnt because it's simpler. Sure, NAnt has a lot more features, is more powerful, etc., but it can quickly get out of hand. If you and your build engineers have the discipline to keep the NAnt scripts simple, then it's all good. However, I've seen too many NAnt-based systems go south to a point where nobody understands what it's doing anymore, and there's no real way to debug it besides doing the equivalent of a good ol' printf. The moment you start using some if/else statement or for loop, that's where, IMHO, it starts smelling.
On the other hand, MSBuild has a solid foundation based on metadata and a less verbose syntax. Its simplicity (or lack of features... depending on how you see it) forces you to write logic in .NET code via new tasks, instead of writing logic in XML markup. This encourages re-usability and, above all things, lets you actually debug your build system in a real debugger.
The only problem with MSBuild is the not-so-occasional bug (especially in the first version) or obscure (although documented) behaviour. And, if that's the kind of thing that really bothers you, being tied to Microsoft.
I switched from NANT to MSBuild. The project is running in .Net 4.0.
My experience in Nant was good. The project kind of died. And when .Net 4.0 came along, it was time to re evaluate the build process.
Since Nant was last released MSBuild has come along ways. At this point, MSBuild is the way to go. It's easy to use, has many extensions. I rewrote my Nant scripts in a day and a half. The MSBuild script is 1/3 the size of the Nant scripts.
Much of the work in the Nant script was setting up the different environments. In MsBuild/.Net 4.0 it's built-in.
I use MSBuild alongside Nant, because the current version of Nant can't as yet compile .NET 3.5 applications (same was true when .NET 2.0 first came out).
The only reason I can see for using msbuild is if you would like to use a automated build server like cruise control. If you are not going to switch, then I would leave it alone.
I use Nant and I love it. I used MSBuild and hated it because of these:
Microsoft forces you to follow their own build procedure that is so intrinsic to their doings that I at least was not able to make it work (I had to compile NET1.1 so I had to mix Nant and MSbuild). I know you can create your own MSBuild file, but I thought it was complex to understand and maintain.
ItemTypes to do file operations are just too hard to follow. You can have Nant do the exact same things and much easier and direct (I had to create an ItemType list and then pass to the file operations).
In MsBuild you have to create your own task dll, in Nant you can do this or you can embed C# code within your script, so its much easier to advance and just build the whole project.
Nant works with Net1.1, MsBuild doesn't.
To install nant, I can even unzip and locate inside my own repository to run it. To install MsBuild is much harder since it depends on many things from Visual Studio, etc. (maybe I'm wrong here, but that seems to be the truth).
Well these are my opinions...
I have taken over the development of a web application that is targeted at the .net 1.0 framework and is written in C# and Visual Basic.
I decided that the first thing we need to do is refine the build process, I wrote build files for the C# projects, but am having tons of problems creating a build file for Visual Basic.
Admittedly, I do not personally know VB, but it seems like I have to hardcode all the imports and references in my build file to get anything to work...certainly not the best way to be doing things...
For any example: if I do not include the namespace System in the build file I will get several errors of common Unkown Types e.g: Guid
does NAnt typically require this for VB code or is does the VB code need a possible NAnt-freindly refactoring?
Does anybody have VB NAnt tips?
I have had a similar experience with NAnt and the vbc compiler for VB.NET projects that are developed with Visual Studio. My solution has been to avoid importing namespaces at the project level in Visual Studio (which occurs by default), and use explicit Imports statements at the class/file level. C# projects work this way by default (no project level namespace imports), and I like the extra information provided by explicit namespace directives when looking at a file.
Interesting that VB.NET and C# VS projects are so different in that respect.
I'm not sure, if you talk about VB or VB.Net.
Either way, have a look at Nant Contrib. Maybe they have a solution.
Are you calling msbuild to build? Or are you calling the VS.NET IDE exe to build. We've had no problems with our c#/VB.NET mix using CC.NET and NAnt and do not have to specify referenced assemblies inside of the build files.
What we do is using the IDE exe to build solutions that contain the projects we want to build.
I would recommend that you take the language specific compilers out of the equation for this one. And you can still use NAnt to do this:
First start off with a target that uses MSBuild because that will compile your project regardless of language used and take care of the dependencies for you. That means you don't need to hard code them in.
Example:
<target name="WinBuild">
<exec program="msbuild.exe"
basedir="${DotNetPath}"
workingdir="${SolutionPath}"
commandline="MySolution.sln
/nologo /verbosity:normal /noconsolelogger
/p:Configuration=Debug /target:Rebuild" />
</target>
I think once you've got that nailed - you can spend plenty of time trying to get NAnt to compile natively, but in my opinion, this is what I would use for this project since it seems to be a once off?
Hope that helps,
Cheers,
Rob G