I am using lodash to turn a string in the lowercase letter. It works fine when I all the letters in the string is uppercase. It turns them into lower case but as soon I put a lower case alphabet in it, spaces appear in between the string out of nowhere. How can I remove these spaces?
Input:
var string= lodash.lowerCase("rRRRR-R")
console.log(string);
Output :
r rrrr r
One the spaces is because of the hyphen. The one in the beginning I do not understand. I can not use lodash.toLower because I need a space whenever there is a hypen. I can not get it with the loadash.toLower command.
You can use the lodash.replace method to replace the hyphen with a space and then use lodash.toLower to convert the string to lowercase.
var string = _.toLower(_.replace("rRRRR-R", "-", " "));
console.log(string);
O/P : r rrrr r
Related
I have a string "\ufffd\ufffd hello\n"
i have a code like this
fun main() {
val bs = "\ufffd\ufffd hello\n"
println(bs) // �� hello
}
and i want to see "\ufffd\ufffd hello", how can i escape \u for every hex values
UPD:
val s = """\uffcd"""
val req = """(?<!\\\\)(\\\\\\\\)*(\\u)([A-Fa-f\\d]{4})""".toRegex()
return s.replace(unicodeRegex, """$1\\\\u$3""")
(I'm interpreting the question as asking how to clearly display a string that contains non-printable characters. The Kotlin compiler converts sequences of a \u followed by 4 hex digits in string literals into single characters, so the question is effectively asking how to convert them back again.)
Unfortunately, there's no built-in way of doing this. It's fairly easy to write one, but it's a bit subjective, as there's no single definition of what's ‘printable‘…
Here's an extension function that probably does roughly what you want:
fun String.printable() = map {
when (Character.getType(it).toByte()) {
Character.CONTROL, Character.FORMAT, Character.PRIVATE_USE,
Character.SURROGATE, Character.UNASSIGNED, Character.OTHER_SYMBOL
-> "\\u%04x".format(it.toInt())
else -> it.toString()
}
}.joinToString("")
println("\ufffd\ufffd hello\n".printable()) // prints ‘\ufffd\ufffd hello\u000a’
The sample string in the question is a bad example, because \uFFFD is the replacement character — a black diamond with a question mark, usually shown in place of any non-displayable characters. So the replacement character itself is displayable!
The code above treats it as non-displayable by excluding the Character.OTHER_SYMBOL type — but that will also exclude many other symbols. So you'll probably want to remove it, leaving just the other 5 types. (I got those from this answer.)
Because the trailing newline is non-displayable, that gets converted to a hex code too. You could extend the code to handle the escape codes \t, \b, \n, \r and maybe \\ too if needed. (You could also make it more efficient… this was done for brevity!)
Simply escape the \ in your strings by adding another backslash in front of it:
val bs = "\\ufffd\\ufffd hello\n"
You can also use raw strings with """ so you don't have to escape the backslashes (which is useful for regex):
val bs = """\ufffd\ufffd hello\n"""
Note that in that case the \n would also NOT be counted as an LF character, and will be literally printed as the 2 characters "\n".
You can add literal line breaks in your raw string if you want an actual line feed, though:
val bs = """\ufffd\ufffd hello
"""
I tried many ways to get a single backslash from an executed (I don't mean an input from html).
I can get special characters as tab, new line and many others then escape them to \\t or \\n or \\(someother character) but I cannot get a single backslash when a non-special character is next to it.
I don't want something like:
str = "\apple"; // I want this, to return:
console.log(str); // \apple
and if I try to get character at 0 then I get a instead of \.
(See ES2015 update at the end of the answer.)
You've tagged your question both string and regex.
In JavaScript, the backslash has special meaning both in string literals and in regular expressions. If you want an actual backslash in the string or regex, you have to write two: \\.
The following string starts with one backslash, the first one you see in the literal is an escape character starting an escape sequence. The \\ escape sequence tells the parser to put a single backslash in the string:
var str = "\\I have one backslash";
The following regular expression will match a single backslash (not two); again, the first one you see in the literal is an escape character starting an escape sequence. The \\ escape sequence tells the parser to put a single backslash character in the regular expression pattern:
var rex = /\\/;
If you're using a string to create a regular expression (rather than using a regular expression literal as I did above), note that you're dealing with two levels: The string level, and the regular expression level. So to create a regular expression using a string that matches a single backslash, you end up using four:
// Matches *one* backslash
var rex = new RegExp("\\\\");
That's because first, you're writing a string literal, but you want to actually put backslashes in the resulting string, so you do that with \\ for each one backslash you want. But your regex also requires two \\ for every one real backslash you want, and so it needs to see two backslashes in the string. Hence, a total of four. This is one of the reasons I avoid using new RegExp(string) whenver I can; I get confused easily. :-)
ES2015 and ES2018 update
Fast-forward to 2015, and as Dolphin_Wood points out the new ES2015 standard gives us template literals, tag functions, and the String.raw function:
// Yes, this unlikely-looking syntax is actually valid ES2015
let str = String.raw`\apple`;
str ends up having the characters \, a, p, p, l, and e in it. Just be careful there are no ${ in your template literal, since ${ starts a substitution in a template literal. E.g.:
let foo = "bar";
let str = String.raw`\apple${foo}`;
...ends up being \applebar.
Try String.raw method:
str = String.raw`\apple` // "\apple"
Reference here: String.raw()
\ is an escape character, when followed by a non-special character it doesn't become a literal \. Instead, you have to double it \\.
console.log("\apple"); //-> "apple"
console.log("\\apple"); //-> "\apple"
There is no way to get the original, raw string definition or create a literal string without escape characters.
please try the below one it works for me and I'm getting the output with backslash
String sss="dfsdf\\dfds";
System.out.println(sss);
I want to judge if a positive number string is end with ".0", so I wrote the following sql:
select '12310' REGEXP '^[0-9]*\.0$'. The result is true however. I wonder why I got the result, since I use "\" before "." to escape.
So I write another one as select '1231.0' REGEXP '^[0-9]\d*\.0$', but this time the result is false.
Could anyone tell me the right pattern?
Dot (.) in regexp has special meaning (any character) and requires escaping if you want literally dot:
select '12310' REGEXP '^[0-9]*\\.0$';
Result:
false
Use double-slash to escape special characters in Hive. slash has special meaning and used for characters like \073 (semicolon), \n (newline), \t (tab), etc. This is why for escaping you need to use double-slash. Also for character class digit use \\d:
hive> select '12310.0' REGEXP '^\\d*?\\.0$';
OK
true
Also characters inside square brackets do not need double-slash escaping: [.] can be used instead of \\.
If you know it is a number string, why not just use:
select ( val like '%.0' )
You need regular expression if you want to validate that the string has digits everywhere else. But if you only need to check the last two characters, like is sufficient.
As for your question . is a wildcard in regular expressions. It matches any character.
I know that I can validate an input field by adding a inputmaskvalidator tag. I read the documentum doc :
The mask character string:
: numeric characters
& : all characters
A : alphanumeric characters only
? : alphabetic characters only
U : uppercase alphabetic characters only
L : lowercase alphabetic characters only
Example: date mask ##/##/## permits
the input date 12/24/95 To use one of
the mask characters as a literal
member of the mask string, place a
double slash (\) preceding the
character.
Let's guess I want to accept double only to store it as a double in the content server. What must be the inputmask value?
Something like that?
<dmf:inputmaskvalidator inputmask="#.#" controltovalidate="my_double" name="my_double_validator"/>
or
<dmf:inputmaskvalidator inputmask="##.##" controltovalidate="my_double" name="my_double_validator"/>
You must use other type of validator. Inputmaskvalidator is bad for your purpose. Use for example regexpvalidator. Example you can find on this page:
I need a complete list of characters that should be escaped in sql string parameters to prevent exceptions. I assume that I need to replace all the offending characters with the escaped version before I pass it to my ObjectDataSource filter parameter.
No, the ObjectDataSource will handle all the escaping for you. Any parametrized query will also require no escaping.
As others have pointed out, in 99% of the cases where someone thinks they need to ask this question, they are doing it wrong. Parameterization is the way to go. If you really need to escape yourself, try to find out if your DB access library offers a function for this (for example, MySQL has mysql_real_escape_string).
SQL Books online:
Search for String Literals:
String Literals
A string literal consists of zero or more characters surrounded by quotation marks. If a string contains quotation marks, these must be escaped in order for the expression to parse. Any two-byte character except \x0000 is permitted in a string, because the \x0000 character is the null terminator of a string.
Strings can include other characters that require an escape sequence. The following table lists escape sequences for string literals.
\a
Alert
\b
Backspace
\f
Form feed
\n
New line
\r
Carriage return
\t
Horizontal tab
\v
Vertical tab
\"
Quotation mark
\
Backslash
\xhhhh
Unicode character in hexadecimal notation
Here's a way I used to get rid of apostrophes. You could do the same thing with other offending characters that you run into. (example in VB.Net)
Dim companyFilter = Trim(Me.ddCompany.SelectedValue)
If (Me.ddCompany.SelectedIndex > 0) Then
filterString += String.Format("LegalName like '{0}'", companyFilter.Replace("'", "''"))
End If
Me.objectDataSource.FilterExpression = filterString
Me.displayGrid.DataBind()