How do i add the value which i entered in the widget in our spark sql statement
it_flex_range = dbutils.widgets.get("it_flex_range")
iv_werks=dbutils.widgets.get("Plants")
How do i add the above value which i got from the widget in the below statement
mt_flex_1= spark.sql("select * from table name where flexcell = lit(dbutils.widgets.get("it_flex_range") and werks = lit(dbutils.widgets.get("iv_werks")")
If you are using spark-sql directly, you could follow the steps in the below link
https://docs.databricks.com/notebooks/widgets.html#using-widget-values-in-spark-sql
In case used in a python/pyspark code, you could use format() as suggested earlier or f-string...Since I do not have a table, just included them in the select statement...
dbutils.widgets.text("it_flex_range", "default_it_flex", label = "it_flex_range")
dbutils.widgets.text("Plants", "default_Plants", label = "Plants")
it_flex_range = dbutils.widgets.get("it_flex_range")
iv_werks=dbutils.widgets.get("Plants")
mt_flex_1= spark.sql(f"select '{it_flex_range}', '{iv_werks}'")
mt_flex_1.show()
+---------------+--------------+
|default_it_flex|default_Plants|
+---------------+--------------+
|default_it_flex|default_Plants|
+---------------+--------------+
Related
I have the following select statement in ABAP:
SELECT munic~mandt VREFER BIS AB ZZELECDATE ZZCERTDATE CONSYEAR ZDIMO ZZONE_M ZZONE_T USAGE_M USAGE_T M2MC M2MT M2RET EXEMPTMCMT EXEMPRET CHARGEMCMT
INTO corresponding fields of table GT_INSTMUNIC_F
FROM ZCI00_INSTMUNIC AS MUNIC
INNER JOIN EVER AS EV on
MUNIC~POD = EV~VREFER(9).
"where EV~BSTATUS = '14' or EV~BSTATUS = '32'.
My problem with the above statement is that does not recognize the substring/offset operation on the 'ON' clause. If i remove the '(9) then
it recognizes the field, otherwise it gives error:
Field ev~refer is unknown. It is neither in one of the specified tables
nor defined by a "DATA" statement. I have also tried doing something similar in the 'Where' clause, receiving a similar error:
LOOP AT gt_instmunic.
clear wa_gt_instmunic_f.
wa_gt_instmunic_f-mandt = gt_instmunic-mandt.
wa_gt_instmunic_f-bis = gt_instmunic-bis.
wa_gt_instmunic_f-ab = gt_instmunic-ab.
wa_gt_instmunic_f-zzelecdate = gt_instmunic-zzelecdate.
wa_gt_instmunic_f-ZZCERTDATE = gt_instmunic-ZZCERTDATE.
wa_gt_instmunic_f-CONSYEAR = gt_instmunic-CONSYEAR.
wa_gt_instmunic_f-ZDIMO = gt_instmunic-ZDIMO.
wa_gt_instmunic_f-ZZONE_M = gt_instmunic-ZZONE_M.
wa_gt_instmunic_f-ZZONE_T = gt_instmunic-ZZONE_T.
wa_gt_instmunic_f-USAGE_M = gt_instmunic-USAGE_M.
wa_gt_instmunic_f-USAGE_T = gt_instmunic-USAGE_T.
temp_pod = gt_instmunic-pod.
SELECT vrefer
FROM ever
INTO wa_gt_instmunic_f-vrefer
WHERE ( vrefer(9) LIKE temp_pod ). " PROBLEM WITH SUBSTRING
"AND ( BSTATUS = '14' OR BSTATUS = '32' ).
ENDSELECT.
WRITE: / sy-dbcnt.
WRITE: / 'wa is: ', wa_gt_instmunic_f.
WRITE: / 'wa-ever is: ', wa_gt_instmunic_f-vrefer.
APPEND wa_gt_instmunic_f TO gt_instmunic_f.
WRITE: / wa_gt_instmunic_f-vrefer.
ENDLOOP.
itab_size = lines( gt_instmunic_f ).
WRITE: / 'Internal table populated with', itab_size, ' lines'.
The basic task i want to implement is to modify a specific field on one table,
pulling values from another. They have a common field ( pod = vrefer(9) ). Thanks in advance for your time.
If you are on a late enough NetWeaver version, it works on 7.51, you can use the OpenSQL function LEFT or SUBSTRING. Your query would look something like:
SELECT munic~mandt VREFER BIS AB ZZELECDATE ZZCERTDATE CONSYEAR ZDIMO ZZONE_M ZZONE_T USAGE_M USAGE_T M2MC M2MT M2RET EXEMPTMCMT EXEMPRET CHARGEMCMT
FROM ZCI00_INSTMUNIC AS MUNIC
INNER JOIN ever AS ev
ON MUNIC~POD EQ LEFT( EV~VREFER, 9 )
INTO corresponding fields of table GT_INSTMUNIC_F.
Note that the INTO clause needs to move to the end of the command as well.
field(9) is a subset operation that is processed by the ABAP environment and can not be translated into a database-level SQL statement (at least not at the moment, but I'd be surprised if it ever will be). Your best bet is either to select the datasets separately and merge them manually (if both are approximately equally large) or pre-select one and use a FAE/IN clause.
They have a common field ( pod = vrefer(9) )
This is a wrong assumption, because they both are not fields, but a field an other thing.
If you really need to do that task through SQL, I'll suggest you to check native SQL sentences like SUBSTRING and check if you can manage to use them within an EXEC_SQL or (better) the CL_SQL* classes.
The data that appears does not match the conditions that have been applied
I implemented SQL code in the Navicat application, and have changed the structure of the code several times but it still doesn't work,
data that is not of ilart condition type
still appears
SELECT SERMAT,ILART,sum(GKSTP) as jumlah
FROM swift_zab_iw39
WHERE ILART='OVH' OR ILART='TST' and SERMAT='024147-000:09052'
GROUP BY ILART,SERMAT
Use IN operator:
WHERE ILART IN('OVH','TST') AND SERMAT = '024147-000:09052'
Add parenthesis to the OR condition in the WHERE clause as:
WHERE (ILART = 'OVH' OR ILART = 'TST') AND SERMAT = '024147-000:09052'
i want to update some data from a table (ehraz) in MS_Access 2007 by another table's data by checking this condition : if tableA.siba=Table2.siba then update Table1.field1 by Table2.Field2.
i use this t-sql command in sql server and works :
update ehraz set
ehraz.B_CODEMELI =bn.B_CodeMelli ,
ehraz.B_NAME =ltrim(rtrim(cast(bn.B_Name as nvarchar(20)))) ,
ehraz.B_FAMILY =ltrim(rtrim(cast (bn.B_Family as nvarchar(30)))) ,
ehraz.B_FATHER_N = ltrim(rtrim(cast(bn.B_Father_N as nvarchar(20)))),
ehraz.B_SHENAS =ltrim(rtrim(bn.B_Shenas)) ,
ehraz.B_TAVALOD = ltrim(rtrim(cast(bn.B_Tavalod as nvarchar(15)))),
ehraz.B_MOSHTARI = ltrim(rtrim(cast(bn.B_Moshtari as nvarchar(20)))) ,
ehraz.B_BARNO = ltrim(rtrim(cast(bn.B_Brno as nvarchar(10)))) ,
ehraz.CLOS = ltrim(rtrim(cast(bn.CLOS as nvarchar(5))))
from bn_data bn
where ehraz.siba = bn.Siba
how can i do this in MS-Access 2007? this query did't works in ms access.
Does this work for you?
update ehraz
inner join bn_data bn
on ehraz.siba = bn.Siba
set
ehraz.B_CODEMELI = bn.B_CodeMelli,
ehraz.B_NAME = Trim(CStr(bn.B_Name)),
ehraz.B_FAMILY = Trim(CStr(bn.B_Family)),
ehraz.B_FATHER_N = Trim(CStr(bn.B_Father_N)),
ehraz.B_SHENAS = Trim(CStr(bn.B_Shenas)),
ehraz.B_TAVALOD = Trim(CStr(bn.B_Tavalod)),
ehraz.B_MOSHTARI = Trim(CStr(bn.B_Moshtari)),
ehraz.B_BARNO = Trim(CStr(bn.B_Brno)),
ehraz.CLOS = Trim(CStr(bn.CLOS));
this query will not work in MS-Access because some of the keywords that are used in the query are not supported by MS-Access like the cast function is not supported in MS-Access. Instead Use CStr function for type conversion into text Format and CInt function to type conversion in Number format....
try replacing these keywords and let me know if this helps.
I have a Geography column in a table in SQL Server and would like to filter rows with a specific geometry type, e.g. all records where geometry type is 'Point'
The SQL query would look like
select * from GeometryTable g where g.Geography.STGeometryType() = 'Point'
How can I create a criteria for that? The criteria is going to be used with other criterias
criteria.Add(Restrictions.Add(<Geography.STGeometryType()>, some.Value)
Thanks
Use this syntax:
var criteria = session.CreateCriteria<Geometry>();
criteria.Add
(
Expression.Sql(" {alias}.[Geography].STGeometryType() = ? "
, "Point" // a place for your parameter
, NHibernate.NHibernateUtil.String)
);
var list = criteria.List<Geometry>();
This is the only place that I get all answer ;)
I want to select :
SELECT
RTRIM(LTRIM(il.Num_bloc)) AS Bloc,
RTRIM(LTRIM(il.num_colis)) AS Colis,
cd.transporteur AS Coursier,
cd.origine AS Origine,
cd.destination AS Destinataire,
cd.adresse AS [Adresse Destinataire],
cd.poids AS Poids,
il.Signataire, il.num_cin AS CIN, il.date_livraison AS [Date Livraison]
FROM
dbo.cd
INNER JOIN
dbo.il ON cd.bloc = il.Num_bloc AND dbo.cd.colis = dbo.il.num_colis
WHERE
(il.Num_bloc = RTRIM(LTRIM(#ParamBloc)))
AND (il.num_colis = RTRIM(LTRIM(#ParamColis)))
In the way of getting result if the user put ether #ParamBloc or #ParamColis
Try using IsNull() function.
A simple query would go like this
Select * from yourTable
Where
Num_bloc = ISNULL(#ParamBloc, Num_block) AND
num_colis = ISNULL(#ParamColis, num_colis)
The second parameter would make the expression to true if the #parameter Bloc or Colis is null. This query would be useful for all 4 possible combination of these two parameter.