I am trying to use Auth0 to get a list of users when my user list is >1000 (approx 2000)
So I understand a bit better now how this works after following the steps at:
https://auth0.com/docs/manage-users/user-migration/bulk-user-exports
There are three steps:
Use a POST call to the https://MY_DOMAIN/oauth/token endpoint to get an auth token (done)
Then take this token and insert it into the next POST call to the endpoint: https://MY_DOMAIN/api/v2/jobs/users-exports
Then take the job_id and insert it into the 3rd GET call to the endpoint: https://MY_DOMAIN/api/v2/jobs/MY_JOB_ID
But this just gives me a link to a document that I download. Essentially is the same end result as using the User Import / Export extension.
This is NOT what I want. I want to be able to call an endpoint and have it return a list of all the users (similar to the Retrieve Users with the Get Users Endpoint). I require it is done this way, so I can write a python script and run it as a cron job.
However, since I have over 1000 users, I am getting the below error when I call the GET /API/v2/users endpoint.
auth0.v3.exceptions.Auth0Error: 400: You can only page through the first 1000 records. See https://auth0.com/docs/users/search/v3/view-search-results-by-page#limitation
Can anyone help? Can this be done all the way I wish it to be?
Related
I want to make script using jmeter for performance testing of login page . The authorization type is code and code challenge method is sh256. How could I fetch code challenge code verifier and state or noance values daynamically.
The script is successfull for 1 single user but failing for multiple can any one help? Also I am using blazemeter to record script..
The process of "fetching" dynamic values is known as correlation and there is a lot of information on the topic in the Internet, i.e. How to Handle Correlation in JMeter
The main steps are:
Use a suitable JMeter Post-Processor to extract a dynamic value from the response into a JMeter Variable
Replace recorded hard-coded value with the JMeter Variable from the previous step
I've just created an extractor with import.io. This extractor uses chaining. Firstly I'm extracting some urls from one page and with these extracted urls, I'm extracting detail pages. When detail pages' extraction finish, I want to get the results. But how can I be sure that extraction is completed. Is there any api endpoint for checking the status of extraction?
I found "GET /store/connector/{id}" endpoint from legacy. But when I try this, I got 404. You can take a look at the screenshot.
Another question is, I want to schedule my extractor twice a day. Is this possible?
Thanks
Associated with each Extractor are Crawl Runs. A crawl run represents the running of an extractor with a specific configuration (training, list of URLs, etc). The state of each of a crawl run can have one of the following values:
STARTED => Currently running
CANCELLED => Started but cancelled by the user
FINISHED => Run was complete
Additional metadata that is included is as follows:
Started At - When the run started
Stopped At - When the run finished
Total URL Count - Total number of URLs in the run
Success URL Count - # of successful URLs queried
Failed URL Count - # of failed URLs queried
Row Count - Total number of rows returned in the run
The REST API to get the list of craw runs associated with an extractor is as follows:
curl -s X GET "https://store.import.io/store/crawlrun/_search?_sort=_meta.creationTimestamp&_page=1&_perPage=30&extractorId=$EXTRACTOR_ID&_apikey=$IMPORT_IO_API_KEY"
where
$EXTRACTOR_ID - Extractor to list crawl runs
$IMPORT_IO_API_KEY - Import.io API from your account
I am still new to javascript and trying to write a Slackbot in express js. I want to use the method defined in https://api.slack.com/methods/channels.history. How should this look syntacticly and how do I use it since the method is simply a URL?
You need to make an http request for the URL and you'll be returned a response with an object containing the status (ok:true|false), if there are more messages (has_more:true|false), and then an array of the actual messages (messages:array).
The response should look something like this:
{
has_more:true
messages:Array[100]
ok:true
}
The url that you make the get request to should look something like:
https://slack.com/api/channels.history?token=BOT_TOKEN&channel=CHANNEL_ID&pretty=1
Where BOT_TOKEN is the token attached to the bot you created, and CHANNEL_ID is the ID (not the name) of the channel whos history you want to get (9 uppercase alphanumeric characters, starts with a "C").
There are also a few other parameters you can include in the url. For example, "latest=", "oldest=", "inclusive=", "count=", and "unreads=". Details about those parameters can be found on the page you linked to (https://api.slack.com/methods/channels.history).
If you want to test it out in your browser's console, find a page where jQuery is loaded, open your dev tools and head into the console, and enter the following (with your bot token and channel id swapped in):
$.get('https://slack.com/api/channels.history?token=BOT_TOKEN&channel=CHANNEL_ID&pretty=1', function(response){console.log(response)});
I am working with the Yodlee services in c# and using the RESTful api. So far I have successfully connected and logged in with my CobrandSession and UserSessionToken in the development environment. I used the sample apps provided in c# and with some advice from shreyans i got an app working. What I got working was
1) Get YodleeAuthentication
2) Get UserAuthentication
3) Get ItemSummaries
I am now trying to get the full transaction details for each of the Items (i.e. collections of accounts that are an Item)
reading the Docs here https://developer.yodlee.com/Indy_FinApp/Aggregation_Services_Guide/REST_API_Reference/executeUserSearchRequest it states that I need to call executeUserSearchRequest and then paginate through the results using the getUserTransactions. So I am stuck at this point. I dont really want a search which has parameters I just want ALL transactions for this account that I can see.
However, I am using the variables as defined in that page :-
var request = new RestRequest("/jsonsdk/TransactionSearchService/executeUserSearchRequest", Method.POST);
request.AddParameter("cobSessionToken", param.CobSessionToken);
request.AddParameter("userSessionToken", param.UserSessionToken);
request.AddParameter("transactionSearchRequest.containerType", param.ContainerType);
request.AddParameter("transactionSearchRequest.higherFetchLimit", param.HigherFetchLimit);
request.AddParameter("transactionSearchRequest.lowerFetchLimit", param.LowerFetchLimit);
request.AddParameter("transactionSearchRequest.resultRange.endNumber", param.EndNumber);
request.AddParameter("transactionSearchRequest.resultRange.startNumber", param.StartNumber);
request.AddParameter("transactionSearchRequest.searchFilter.currencyCode", param.CurrencyCode);
request.AddParameter("transactionSearchRequest.searchFilter.postDateRange.fromDate", param.FromDate);
request.AddParameter("transactionSearchRequest.searchFilter.postDateRange.toDate", param.ToDate);
request.AddParameter("transactionSearchRequest.searchFilter.transactionSplitType.splitType", param.SplitType);
request.AddParameter("transactionSearchRequest.ignoreUserInput", param.IgnoreUserInput);
request.AddParameter("transactionSearchRequest.searchFilter.itemAcctId", param.ItemAcctId);
var response = RestClientUtil.GetBase().Execute(request);
var content = response.Content;
return new YodleeServiceResultDto(content);
As per the response from shreyans in this posting Getting Error "Any one of [**] of transactionSearchFilter cannot be NULL OR Invalid Values I am not putting in the ClientId and the ClientName
The documentation doesn't specify the format of the dates but the example seems to tell me that its american date format. And specifies a parameter saying IgnoreUserinput, but doesnt have a parameter for user input so this is confusing
When I make a call using this format I get an error response
var getSearchResult = yodleeExecuteUserSearchRequest.Go(yodleeExecuteUserSearchRequestDto);
getSearchResult.Result="
{"errorOccured":"true","exceptionType":"Exception Occured","refrenceCode":"_60ecb1d7-a4c4-4914-b3cd-49182518ca5d"}"
But I get no error message in this and I have no idea what I have done wrong or where to look up this error, can somebody who has used Yodlee REST Api point me in the right direction as I need to get this researched quickly....
thanks your your help, advice, corrections and pointers....
Here is the list of parameters which you can try
1) For a specific ItemAccountId all transactions
transactionSearchRequest.containerType=all
transactionSearchRequest.higherFetchLimit=500
transactionSearchRequest.lowerFetchLimit=1
transactionSearchRequest.resultRange.startNumber=1
transactionSearchRequest.resultRange.endNumber=500
transactionSearchRequest.searchClients.clientId=1
transactionSearchRequest.searchClients.clientName=DataSearchService
transactionSearchRequest.searchFilter.currencyCode=USD
transactionSearchRequest.searchClients=DEFAULT_SERVICE_CLIENT
transactionSearchRequest.ignoreUserInput=true
transactionSearchRequest.ignoreManualTransactions=false
transactionSearchRequest.searchFilter.transactionSplitType=ALL_TRANSACTION
transactionSearchRequest.searchFilter.itemAccountId.identifier=10000353
2) For a Specific account (itemAccountId) with start and end dates
transactionSearchRequest.containerType=all
transactionSearchRequest.higherFetchLimit=500
transactionSearchRequest.lowerFetchLimit=1
transactionSearchRequest.resultRange.startNumber=1
transactionSearchRequest.resultRange.endNumber=500
transactionSearchRequest.searchClients.clientId=1
transactionSearchRequest.searchClients.clientName=DataSearchService
transactionSearchRequest.searchFilter.currencyCode=USD
transactionSearchRequest.searchClients=DEFAULT_SERVICE_CLIENT
transactionSearchRequest.ignoreUserInput=true
transactionSearchRequest.ignoreManualTransactions=false
transactionSearchRequest.searchFilter.transactionSplitType=ALL_TRANSACTION
transactionSearchRequest.searchFilter.itemAccountId.identifier=10000353
transactionSearchRequest.searchFilter.postDateRange.fromDate=08-01-2013
transactionSearchRequest.searchFilter.postDateRange.toDate=10-31-2013
I'm trying to use the http://Astrid.com API, specifically to get data using the method under the "Request Format" section on this page - http://astrid.com/apidoc/file.README.html
The URL I built is:
https://astrid.com/api/7/task_list?app_id=[MY APP ID]&time=1&user_id=[MY USER ID]&sig=[MY REQUEST SIGNATURE]
And it returns this:
{"list":[],"time":1363131562,"status":"success"}
Seems like it worked, but does anyone know why the "list" array might be returning empty? I've created a bunch of tasks in my profile so it should be showing those.
Thanks!
You need to sign in first with the method user_signin. If successful you get a token.
Then you need to call the task_list method providing the token.
You do not need to provide a user id with the task_list method. It is only used to select tasks that you share with this user.
Example for signing in:
https://astrid.com/api/7/user_signin?provider=password&app_id=YOUR_APP_ID&secret=YOUR_ASTRID_PASSWORD&sig=SIGNATURE&time=1365715302.36&email=YOUR_EMAIL
Example for getting your tasks:
https://astrid.com/api/7/task_list?active=true&token=THE_TOKEN&sig=SIGNATURE&app_id=YOUR_APP_ID&time=1365715304.41