I found some AXL Error Codes, 5000 - 5007 (5006 missing), but there have to be more.
For example I also received a -239.
Is there a documentation on the AXL Error Codes?
Perhaps there is a database table containing the AXL Error Codes.
Like the database tables from Cisco Unified Communications Manager 12.5(1) Database Dictionary:
https://developer.cisco.com/docs/axl/#!12-5-cucm-data-dictionary
There are tables like
typeadminerror
typedberrors
containing error codes and messages, but none for the AXL Error Codes (like mention above, 5000 - 5007, -239).
Where are those AXL Error Codes defined, and the messages?
The AXL error codes are not documented and may change per release (though very unlikely to see anything but additions), but may be useful when working with Cisco Developer Support.
Examining the AXL service logs on CUCM may provide some clues for the errors as you encounter them.
Related
We are trying to replicate data from AlloyDB to Bigquery using Datastream.
We Get "An unknown error occurred. Please try again. If the error persists, contact Google support."
In the Datastream console --> objects list, we see all source tables with Object Status "Failed" and Backfill status "Completed".
In Bigquery we see only a subset of the tables (not all the "Completed" objects were synced).
In the Logs Explorer I can see this error on BQ:
I also see this error: error: {
code: 11
message: "Unsupported primary key column either does not exist or is a pseudocolumn at [1:401]"
}
The column referred in the error is of type enum.
The desired situation is having all the AlloyDB tables replicated into Bigquery.
The error message is not very informative...
What does it mean?
What would be the best way to go about troubleshooting this?
We're actively working on making these error messages be more informative, and improvements are continuously being rolled out as we identify more edge cases. Assuming you followed all the steps in the documentation, then you may need to open a ticket with support for further investigation. If a support ticket isn't an option, you can still report the issue using the public issue tracker
I just had this same issue but connecting to a PostgreSQL in AWS RDS:
Beginning with Postgres 10, passwords are encrypted using SCRAM-SHA-256 in PostgreSQL. Google DataStream still expects MD5 password encryption, or it will generate an "unknown error" in the logs and fail the backfills.
You'll need to update your postgresql.conf (or RDS Cluster Parameter Group if you're using AWS like me):
password_encryption = 'MD5'
Restart the database and make sure the parameter has changed with:
SHOW password_encryption;
Reset the password of your users:
ALTER USER "{username}" with password '{password}';
More info from the PostgreSQL docs: https://www.postgresql.org/docs/current/auth-password.html
I need to know the list of Visual Basic 6 error codes returned by ADODB SQL Server connection. I also want to know the Err.Nativeerror for each SQL ADODB error code.
Any information about where we can get these errors codes or any VB6 codes which list the exceptions and error codes with descriptions of the error details and what the errors mean.
A table of the ADODB error codes with brief descriptions are located at ADO Programmer's Reference > ADO API Reference > ADO Enumerated Constants.
There is a note:
OLE DB errors may be passed to your ADO application. Typically, these
can be identified by a Windows facility code of 4. For example,
0x8004.
Also to determine if an HRESULT error code is an ADODB error, this additional note indicates:
Hexadecimal—The hexadecimal representation of the full error number.
The Windows facility code is in the fourth digit. The facility code
for ADO error numbers is A. For example: 0x800A0E7B.
See also [MS-ERREF]: Windows Error Codes from Microsoft which has a link to a pdf of a document from Microsoft with a fairly comprehensive list of codes and their descriptions. There is an RSS feed to subscribe for notifications of updates.
See as well as very comprehensive list of Error Codes list for Microsoft technologies from Symantech.
See this Wikipedia topic HRESULT describing the error code format used by Microsoft for HRESULT error codes. From the topic the format as to how bits are used is:
S - Severity - indicates success/fail
0 - Success
1 - Failure
R - Reserved portion of the facility code, corresponds to NT's second severity bit.
1 - Severe Failure
C - Customer. This bit specifies if the value is customer-defined or Microsoft-defined.
0 - Microsoft-defined
1 - Customer-defined
N - Reserved portion of the facility code. Used to indicate a mapped NT status value.
X - Reserved portion of the facility code. Reserved for internal use. Used to indicate HRESULT values that are not status values, but are instead message ids for display strings.
Facility - indicates the system service that is responsible for the error. Example facility codes are shown below (for the full list see [1]).
1 - RPC
2 - Dispatch (COM dispatch)
3 - Storage (OLE storage)
4 - ITF (COM/OLE Interface management)
7 - Win32 (raw Win32 error codes)
8 - Windows
9 - SSPI
10 - Control
11 - CERT (Client or server certificate)
...
Code - is the facility's status code
The ITF facility code has subsequently been recycled as the range in which COM components can define their own component-specific error code.
A few of the more common codes are:
adErrItemNotFound - -2146825023 or 0x800A0CC1 - Item cannot be found in the collection that corresponds to the requested name or ordinal.
adErrNoCurrentRecord - -2146825267 or 0x800A0BCD - Either BOF or EOF is True, or the current record has been deleted. Requested operation requires a current record.
adErrObjectNotSet - -2146824868 or 0x800A0D5C - Object is no longer valid.
One programmer error that I have done myself which resulted in an HRESULT of 0x800A0CC1 when doing an Update() is that the I did not have my SAFEARRAY setup properly. See usage differences between _variant_t, COleVariant, CComVariant, and VARIANT and using SAFEARRAY variations.
I am working on xcart website for my company. Right now, I always get the error messages from my website http://mothersenvogue.com.kh/ as below:
[24-May-2015 08:50:51] (shop: 24-May-2015 15:50:51) SQL error:
Site : https://mothersenvogue.com.kh
Remote IP : 176.9.29.209
Logged as :
SQL query : SHOW FIELDS FROM xcart_session_history
Error code : 103
Description : Got error 28 from storage engine
Request URI: /secure_login.php?xid=025530538a738ddc86617a9aa81bc990
Backtrace:
/home/www/mothersenvogue.com.kh/include/func/func.db.php:189
/home/www/mothersenvogue.com.kh/include/func/func.db.php:115
/home/www/mothersenvogue.com.kh/include/func/func.db.php:384
/home/www/mothersenvogue.com.kh/include/func/func.db.php:630
/home/www/mothersenvogue.com.kh/include/func/func.db.php:458
/home/www/mothersenvogue.com.kh/include/sessions.php:161
/home/www/mothersenvogue.com.kh/init.php:524
/home/www/mothersenvogue.com.kh/preauth.php:51
/home/www/mothersenvogue.com.kh/auth.php:45
/home/www/mothersenvogue.com.kh/secure_login.php:37
-------------------------------------------------
Many error messages are from func.db.php, init.php, preauth.php, auth.php all at the same line number, and on the same SQL Query "SHOW" statement.
I tried to check all the above files at their given line number but I could not find anything wrong.
Pleasse kindly help advise me what is wrong with it? is it something wrong inside these files as I got many error messages sent to me by email with the similar content like above.
I was refered to here from my previous question in xcart forum, and here is my question there:
https://bt.x-cart.com/view.php?id=44717
Many thanks.
In most cases the file storage (the drive where your files are located on the hosting server, where you checked the free space) is physically located on a different virtual / physical server / drive. Most hosting companies use an optimized dedicated servers for MySQL.
Thus you see enough space in your account, but MySQL still reports that there is no space left on the drive (where MySQL server is currently running).
Thus the best way is to contact the hosting provider and find out what's the situation with the disk space on that very machine, where MySQL is running.
I'm trying to handle UDH data for multipart messages and I want to use an appropriate error code when there's a problem with the multipart fields. There are several error codes for bad TLV's, but I don't see anything except generic failure messages that I could use for UDH. Is that the best I can do here, or is there a more direct message I could use?
Your observation is correct - there is not a single error defined for UDH.
If you want, you can use error codes from reserved section and assign specific meaning to one/some of them. I think the "Reserved for SMSC vendor specific errors" (0x400-0x4FF) can be a good candidate.
Actually it looks to me like ESME_RX_R_APPN = 0x66 "ESME receiver reject message error." is the best error code to throw here.
It should correspond to a permanent error for this message only and let further messages be processed.
I am trying to open word Template from AX 2012 Reports. It works fine in the env I have developed but when I try to execute the same from different login I face the "COM error"
Please help.
You can always find help for these mysterious Office error codes by decoding the error code. COM error codes contain three major parts:
the top 4 bits indicate the severity of the error. 8 means "warning", one you can't ignore
the next 12 bits is the facility code, the origin of the error. 10 means "automation"
the lower 16 bits is the internal error code, the one that you really care about.
Switch your calculator to hex mode, 0x175d is error code 5981. Now turn to Google and query "word error 5981".
Lots of good hits, you can read them at your leisure. But clearly there's a problem with macros on that machine. Best left to the IT staff at your site, use superuser.com if you need more help with that.