I have a table:
| acctg_cath_id | parent | description |
| 1 | 20 | Bills |
| 9 | 20 | Invoices |
| 20 | | Expenses |
| 88 | 30 |
| 89 | 30 |
| 30 | |
And I want to create a self join in order to group my items under a parent.
Have tried this, but it doesn't work:
SELECT
accounting.categories.acctg_cath_id,
accounting.categories.parent
FROM accounting.categories a1, accounting.categories a2
WHERE a1.acctg_cath_id=a2.parent
I get error: invalid reference to FROM-clause entry for table "categories"
When I try:
a.accounting.categories.acctg_cath_id
b.accounting.categories.acctg_cath_id
I get error: cross-database references are not implemented: a.accounting.categories.acctg_cath_id
Desired output:
Expenses (Parent 20)
Bills (Child 1)
Invoices (Child 9)
What am I doing wrong here?
It seems you merely want to sort the rows:
select *
from accounting.categorie
order by coalesce(parent, acctg_cath_id), parent nulls first, acctg_cath_id;
Result:
+---------------+--------+-------------+
| acctg_cath_id | parent | description |
+---------------+--------+-------------+
| 20 | | Expenses |
| 1 | 20 | Bills |
| 9 | 20 | Invoices |
| 30 | | |
| 88 | 30 | |
| 89 | 30 | |
+---------------+--------+-------------+
Your syntax is performing a cross join:
FROM accounting.categories a1, accounting.categories a2
Try the following:
SELECT
a2.acctg_cath_id,
a2.parent
FROM accounting.categories a1
JOIN accounting.categories a2 ON (a1.acctg_cath_id = a2.parent)
;
Examine the DBFiddle.
You don't need grouping, only self join:
select
c.acctg_cath_id parentid, c.description parent,
cc.acctg_cath_id childid, cc.description child
from (
select distinct parent
from categories
) p inner join categories c
on p.parent = c.acctg_cath_id
inner join categories cc on cc.parent = p.parent
where p.parent = 20
You can remove the WHERE clause if you want all the parents with all their children.
See the demo.
Results:
> parentid | parent | childid | child
> -------: | :------- | ------: | :-------
> 20 | Expences | 1 | Bills
> 20 | Expences | 9 | Invoices
You don't need a self-join. You don't need aggregation. You just need a group by clause:
SELECT ac.*
FROM accounting.categories ac
ORDER BY COALESCE(ac.parent, ac.acctg_cath_id),
(CASE WHEN ac.parent IS NULL THEN 1 ELSE 2 END),
ac.acctg_cath_id;
Related
I'm trying to create a query that returns the names of all people in my database that have less than half of the money of the person with the most money.
These is my query:
select P1.name
from Persons P1 left join
AccountOf A1 on A1.person_id = P1.id left join
BankAccounts B1 on B1.id = A1.account_id
group by name
having SUM(B1.balance) < MAX((select SUM(B1.balance) as b
from AccountOf A1 left join
BankAccounts B1 on B1.id = A1.account_id
group by A1.person_id
order by b desc
LIMIT 1)) * 0.5
This is the result:
+-------+
| name |
+-------+
| Evert |
+-------+
I have the following tables in the database:
+---------+--------+--+
| Persons | | |
+---------+--------+--+
| id | name | |
| 11 | Evert | |
| 12 | Xavi | |
| 13 | Ludwig | |
| 14 | Ziggy | |
+---------+--------+--+
+--------------+---------+
| BankAccounts | |
+--------------+---------+
| id | balance |
| 11 | 525000 |
| 12 | 750000 |
| 13 | 1900000 |
| 14 | 1600000 |
+--------------+---------+
+-----------+-----------+------------+
| AccountOf | | |
+-----------+-----------+------------+
| id | person_id | account_id |
| 301 | 11 | 12 |
| 302 | 13 | 12 |
| 303 | 13 | 14 |
| 304 | 14 | 11 |
| 305 | 14 | 13 |
+-----------+-----------+------------+
What am I missing here? I should get two entries in the result (Evert, Xavi)
I wouldn't approach the logic this way (I would use window functions). But your final having has two levels of aggregation. That shouldn't work. You want:
having SUM(B1.balance) < (select 0.5 * SUM(B1.balance) as b
from AccountOf A1 join
BankAccounts B1 on B1.id = A1.account_id
group by A1.person_id
order by b desc
limit 1
)
I also moved the 0.5 into the subquery and changed the left join to a join -- the tables need to match to get balances.
I would recommend window functions, if your - undisclosed! - database supports them.
You can join and aggregate just once, and then use a window max() to get the top balance. All that is then left to is to filter in an outer query:
select *
fom (
select p.id, p.name, coalesce(sum(balance), 0) balance,
max(sum(balance)) over() max_balance
from persons p
left join accountof ao on ao.person_id = p.id
left join bankaccounts ba on ba.id = ao.account_id
group by p.id, p.name
) t
where balance > max_balance * 0.5
I need to select duplicate rows based on two columns in a join, and i can't seem to figure out how that is done.
Currently i got this:
SELECT s.name,administrative_site_id as adm_id,s.external_code,si.identifier_value
FROM suppliers s
INNER JOIN suppliers_identifier si
ON s.id = si.supplier_id
And the output is something along the lines of below:
| Name | adm_id | external_code |identifier_value |
|:-----------|------------:|:------------: |:----------------:|
| Warlob | 66323 | ext531 | id444 |
| Ozzy | 53123 | ext632 | id333 |
| Motorhead | 521 | ext733 | id222 |
| Perez | 123 | ext833 | id111 |
| Starlight | 521 | ext934 | id222 |
| Aligned | 123 | ext235 | id111 |
What i am looking for, is how to simply select these 4 rows, as they are duplicates based on column: adm_id and Identifier_value
| Name | adm_id | external_code |identifier_value |
|:-----------|------------:|:------------: |:----------------:|
| Motorhead | 521 | ext733 | id222 |
| Perez | 123 | ext833 | id111 |
| Starlight | 521 | ext934 | id222 |
| Aligned | 123 | ext235 | id111 |
First group by ADM_ID, IDENTIFIER_VALUE and find groups that has more than one row in it.
Then select all rows that has these couples
SELECT S.NAME
,ADMINISTRATIVE_SITE_ID AS ADM_ID
,S.EXTERNAL_CODE
,SI.IDENTIFIER_VALUE
FROM SUPPLIERS S INNER JOIN SUPPLIERS_IDENTIFIER SI ON S.ID = SI.SUPPLIER_ID
WHERE (ADMINISTRATIVE_SITE_ID, SI.IDENTIFIER_VALUE) IN (SELECT ADMINISTRATIVE_SITE_ID AS ADM_ID, SI.IDENTIFIER_VALUE
FROM SUPPLIERS S INNER JOIN SUPPLIERS_IDENTIFIER SI ON S.ID = SI.SUPPLIER_ID
GROUP BY ADM_ID, IDENTIFIER_VALUE
HAVING COUNT(*) > 1)
Or an alternate way that may perform better on big datasets:
with t as (
SELECT s.name,administrative_site_id as adm_id,s.external_code,si.identifier_value
COUNT(*) OVER (PARTITION BY administrative_site_id ,identifier_value ) AS cnt
FROM suppliers s
INNER JOIN suppliers_identifier si
ON s.id = si.supplier_id)
select name, adm_id, external_code, identifier_value
from t
where cnt > 1
I'm getting this message while using this query, is there anything wrong?
SELECT t.tanggal_transaksi, o.nama_lengkap, SUM(td.harga * td.qty) total
FROM transaksi t, transaksi_detail td, operator o
WHERE td.transaksi_id = t.transaksi_id AND o.operator_id = t.operator_id
GROUP BY t.transaksi_id
Updated :
After using the answer from #Barbaros Özhan using this query :
SELECT t.tanggal_transaksi, o.nama_lengkap, SUM(td.harga * td.qty) total
FROM transaksi t
INNER JOIN transaksi_detail td ON ( td.transaksi_id = t.transaksi_id )
INNER JOIN operator o ON ( o.operator_id = t.operator_id )
GROUP BY t.tanggal_transaksi, o.nama_lengkap;
the data is successfully displayed. but, there are few problems that occur, the value of the same operator_id cannot appear more than 1 time. Here is the sample data :
+--------------+-------------+-------------------+
| TRANSAKSI_ID | OPERATOR_ID | TANGGAL_TRANSAKSI |
+--------------+-------------+-------------------+
| 1 | 5 | 09/29/2018 |
| 2 | 3 | 09/29/2018 |
| 3 | 3 | 09/29/2018 |
| 4 | 1 | 09/29/2018 |
| 5 | 1 | 09/29/2018 |
+--------------+-------------+-------------------+
After use the query command, the output is :
+-------------------+------------------+--------+
| TANGGAL_TRANSAKSI | NAMA_LENGKAP | TOTAL |
+-------------------+------------------+--------+
| 09/29/2018 | Lina Harun | 419800 |
| 09/29/2018 | Titro Kusumo | 484000 |
| 09/29/2018 | Muhammad Kusnadi | 402000 |
+-------------------+------------------+--------+
When viewed from the operator table, there are 2 data with the same operator_id that is unreadable
+-------------+------------------+
| OPERATOR_ID | NAMA_LENGKAP |
+-------------+------------------+
| 1 | Muhammad Kusnadi |
| 3 | Lina Harun |
| 5 | Tirto Kusumo |
+-------------+------------------+
You need to include the columns in the SELECT-list t.tanggal_transaksi, o.nama_lengkap, also in the GROUP BY-list but not the others like t.transaksi_id. So, you might use the following without any issue :
SELECT t.tanggal_transaksi, o.nama_lengkap, SUM(td.harga * td.qty) total
FROM transaksi t
INNER JOIN transaksi_detail td ON ( td.transaksi_id = t.transaksi_id )
INNER JOIN operator o ON ( o.operator_id = t.operator_id )
GROUP BY t.tanggal_transaksi, o.nama_lengkap;
Or this one :
SELECT t.transaksi_id, SUM(td.harga * td.qty) total
FROM transaksi t
INNER JOIN transaksi_detail td ON ( td.transaksi_id = t.transaksi_id )
GROUP BY t.transaksi_id;
P.S. Prefer using ANSI-92 JOIN standard rather than old-style comma-type JOIN.
I have two tables in Access, Table A and Table B:
Table MasterLockInsNew:
+----+-------+----------+
| ID | Value | Date |
+----+-------+----------+
| 1 | 123 | 12/02/13 |
| 2 | 1231 | 11/02/13 |
| 4 | 1265 | 16/02/13 |
+----+-------+----------+
Table InitialPolData:
+----+-------+----------+---+
| ID | Value | Date |Type
+----+-------+----------+---+
| 1 | 123 | 12/02/13 | x |
| 2 | 1231 | 11/02/13 | x |
| 3 | 1238 | 10/02/13 | y |
| 4 | 1265 | 16/02/13 | a |
| 7 | 7649 | 18/02/13 | z |
+----+-------+----------+---+
All I want are the rows from table B for IDs not contained in A. My current code looks like this:
SELECT Distinct InitialPolData.*
FROM InitialPolData
WHERE InitialPolData.ID NOT IN (SELECT Distinct InitialPolData.ID
from InitialPolData INNER JOIN
MasterLockInsNew
ON InitialPolData.ID=MasterLockInsNew.ID);
But whenever I run this in Access it crashes!! The tables are fairly large but I don't think this is the reason.
Can anyone help?
Thanks
or try a left outer join:
SELECT b.*
FROM InitialPolData b left outer join
MasterLockInsNew a on
b.id = a.id
where
a.id is null
Simple subquery will do.
select * from InitialPolData
where id not in (
select id from MasterLockInsNew
);
Try using NOT EXISTS:
SELECT Distinct i.*
FROM InitialPolData AS i
WHERE NOT EXISTS (SELECT 1
FROM MasterLockInsNew AS m
WHERE m.ID = i.ID)
I have a query that looks like this:
select id, extension, count(distinct(id)) from publicids group by id,extension;
This is what the results looks like:
id | extension | count
-------------+-------------------------+-------
18459154909 | 12333 | 1
18459154909 | 9891114 | 1
18459154919 | 43244 | 1
18459154919 | 8776232 | 1
18766145025 | 12311 | 1
18766145025 | 1122111 | 1
18766145201 | 12422 | 1
18766145201 | 14141 | 1
But what I really want is for the results to look like this:
id | extension | count
-------------+-------------------------+-------
18459154909 | 12333 | 2
18459154909 | 9891114 | 2
18459154919 | 43244 | 2
18459154919 | 8776232 | 2
18766145025 | 12311 | 2
18766145025 | 1122111 | 2
18766145201 | 12422 | 2
18766145201 | 14141 | 2
I'm trying to get the count field to show the total number of records that have the same id.
Any suggestions would be appreciated
I think you want to count distincts extentions, not ids.
Run this query:
select id
, extension
(select count(*) from publicids p1 where p.id = p1.id ) distinct_id_count
from publicids p
group by id,extension;
This is more or less the same as Pastor's answer. Depending on what the optimizer does it might be faster with higher record count source tables.
select p.id, p.extension, p2.id_count
from publicids p
inner join (
select id, count(*) as id_count
from publicids group by id
) as p2 on p.id = p2.id