Firstly, there are related posts:
GlassFish Server update center installation times out
Java EE 7 updatetool installation fails
I got my Java EE 7 SDK (Update 3) from here: http://www.oracle.com/technetwork/java/javaee/downloads/index.html
I have tried each of the solutions in the above posts and here: https://blogs.oracle.com/dipol/troubleshooting-glassfish-update-center
Including:
In the cmd prompt running set PKG_CLIENT_CONNECT_TIMEOUT=300 and set PKG_CLIENT_READ_TIMEOUT=300 before updatetool in C:\glassfish4\bin\updatetool.bat (c:\glassfish4 in my install directory - all settings were default, including install update tool...).
Set above mentioned timeout to much larger values - doesn't appear to make a difference at all, the process basically bombs immediately.
Running C:\glassfish4\bin\updatetool.bat many times.
Triple checking that I didn't somehow configure a proxy server in my sleep.
Use the update tool via the Glassfish admin console at http://localhost:4848 (seems to show no available update or add-ons, which seems odd..)
I get the following screenshot when I run C:\glassfish4\bin\updatetool.bat
I have no idea why the error would be proxy related, unless it happened to be something on their end. Interestingly, If I go directly to the URL mentioned (via Chrome) I get the following page:
What could possibly be going wrong here?
The updatetool was a commercial feature of Oracle GlassFish. Any update functionality relied on Oracle providing a site where updates could be hosted. Since Oracle GlassFish is no longer supported, this site no longer exists so the updatetool won't work any more.
Rather than downloading GlassFish from Oracle, you should download it from the official open source site, hosted on GitHub. Alternatively, if you really do need support, you could try Payara Server which is open source, and derived from GlassFish, but has support available (disclaimer: I work for Payara)
Related
I am trying to setup Unicenta POS on my Windows 10 64 bit machine.
My configuration:
Idempiere server v5.1 (http://127.0.0.1:8080/)
ActiveMQ v5.15.2
(http://127.0.0.1:8161/)
POS Integration plugin (Available
here)
I followed instructions given Here. ActiveMQ is running fine, Unicenta can also send request to ActiveMQ, I can see that in Queues. Idempiere server is also running fine.
I installed POS integration plugin through Felix Web Console. It shows up in the list and It is active. But, that plugin doesn't show up in Idempiere Menu option. Either that plugin has some problems or I am missing something.
I also performed Role Access Update on GardenWorld Client Admin but that didn't change anything. Menu option is still missing.
Please help.
The real issue was that 2Pack did not Pack in into the Database. I had install 2Pack manually and Pack In in my SystemAdmin. After that I logged out and logged in with SuperUser credentials and with GardenAdmin role. And then menu item appeared!
2Pack zip file location - Download
How to Pack In:
I am trying to add Apache Nifi in ambari but continuously failing with error Error occured during stack advisor command invocation:
Unable to delete directory /var/run/ambari-server/stack-recommendations/1.
There is a similar thread with the same error in hortonworks community, I have tried everything mentioned in that thread but unable to fix it. My sandbox is installed in vmware workstation 12 player. I also tried to create and remove directory manually but it is failing with the error invalid argument. Created a thread for this error also on stackexchange. Please help!!!
Here is a link to Hortonworks forum thread. And it seems like sandbox is just broken:
This is due to a docker issue in this 2.5 sandbox build. It will be
fixed in next revision of the sandbox.
There are also some workarounds described (like use older HDP 2.4 or establishing own cluser based on the HDP 2.5 docker image)
Updated sandbox arrived: http://hortonworks.com/downloads
Trust me, active member of community see your posts in multiple locations. In a good, no Big Brother ways :) but cross-posting is an old as world ... Well, you got it.
Did you see a notice for this service in Ambari? Telling it's been deprecated? Same note in the github. There's a good reason for that, it's now been implemented properly by the dev team and with many more features. I.e. all the action is there now.
I think I replied a similar question, though not sure it was yours, take a look in HCC.
I use GlassFish 4.1 single cluster with two instances on same node.
My steps for rolling upgrade:
deploy app with old version ClusterTest:1.0
(asadmin deploy --target=cluster1 --enabled=true --availabilityenabled=true --name=ClusterTest:1.0 ClusterTest.ear)
deploy new version app with disabled state ClusterTest:1.1
(asadmin deploy --target=cluster1 --enabled=false --availabilityenabled=true --name=ClusterTest:1.1 ClusterTest.ear)
enable app on 1st instance
(asadmin enable --target=instance1 ClusterTest:1.1)
On 1st instance new app is available, but on 2nd: 404 error (i expect available old version)
what i do wrong?
There are a lot of problems with rolling upgrades on GlassFish. Many of these problems have been fixed in the latest version of Payara Server. It may be that you aren't hitting any of these issues, but there is a very detailed discussion on the Payara GitHub repository:
https://github.com/payara/Payara/issues/455
You may also want to look at this video which describes basic application versioning which may contain the information you need
https://www.youtube.com/watch?v=6QVBsH6IjEA
i'am trying to integrate hybris 4.7.9 with endeca. I have installed the following endeca components. 1)MDEX engine 2)Platform services 3)Endeca workbench 4)CAS.
I have deployed a sample application on endeca side using "D:\Endeca\ToolsAndFrameworks\11.0.0\deployment_template\bin\deploy.bat"
In Hyend2 in admincockpit of hybris
I have made EAC/CAS connection with my appication and made a export job.
Problem is i am not able to run that job, it reports me following error:
http://localhost:8500/MyAppen_en_data/?wsdl returned response code 404
at com.endeca.itl.service.ServiceLocator.getService(ServiceLocator.java:150)
I don't know Hybris, but since the error is related to Endeca, let me try to give some pointers.
CAS: Check that CAS is up and running
App Name: You might have specified app-name-with-locale (MyAppen) somewhere where you need to specify only app-name (MyApp). [The Endeca app name without the locale is called as "Base Application Name". Go back and check all your configurations in Hybris and Endeca].
You may also refer to this blog (Although it is for ATG framework, it should give idea for Hybris as well).
I have tried for days now trying to find the right version of red5phone, but to no avail. Also, I need red5 and asterisk to be on different servers. I have followed all instructions described in the various tutorials on web, but nothing helps. I have downloaded 2 different versions of red5phone: sip1, sip_47 from the red5phone google code site, but none of them worked!
When I use:
a) sip1 - shows the correct parameters being passed on the red5 server console, but connection is stuck up with the console displaying the following error:
[NioProcessor-1] ERROR o.r.server.service.ServiceInvoker - Method login with parameters [<sip user>, <sip user>,<sip user>,<sip user pwd>, <asterisk server i/p>, <asterisk server i/p>] not found in org.red5.server.webapp.sip.Application#2d0c94a7
b) sip47 - when I type in the values in the flex interface and check the red5 server console, I see all parameters correct(the ones I passed) except for asterisk server ip that i m trying to connect. Instead, it shows 127.0.0.1 by default and completely ignores the passed ip and regsitration fails.
I am using:
red5 server version: 0.9.1, centos: 4.8(final), red5phone used: sip_47 (tried sip1 as well)
As a desperate measure I tried debugging the source code for red5phone (java and flex files) myself. but when I try to create the environment on my local system, I get several compile errors for missing java packages such as javax.media, org.slf4j, org.red5, etc. really confused and desperate for some guidance. Any tips highly appreciated.
Sunil, I'm also new to this, I would try red5-voicebridge installed in your red5 server.
red5-voicebridge Please let me know if you got it to work.