I opened my .pptm ppt vba macro source file for editing, it showed this dialog a few times.
once I open alt+F11 to VBA editor, it has all the forms but the underlying code is not opening, also the modules are unresponsive.
Can anybody suggest a way to recover code/modules from this corrupt file. I have the latest .ppam addin output, I can share the corrupted .pptm file if there is way to attach here. Thanks for the help folks!
Tossing this in as an answer as well as the comment. Better formatting!
Make sure PowerPoint is NOT running, then open REGEDIT.
Go to HKCU\Software\Microsoft\Office\xx.0\PowerPoint\Options
Replace xx.0 with your PPT version: 16.0 for 2016/2019/365, 15.0 for 2013, 14.0 for 2010 etc.
12.0 is 2007. There's no 13.0; MS is apparently superstitious.
Rightclick Options and choose New, DWORD Value
Name it: DebugAddins
Doubleclick it and change its value to 1
Close Regedit.
Start PowerPoint and open the VBA IDE.
All of your installed VBA addins will appear as projects that you can open and edit, so long as they're not password protected (and if you know the password, you're good to go).
Note that you cannot SAVE your edited code. You'll need to copy/paste it back into a PPT/PPTM file and save that, or export the modules you've edited and import them into the original PPT/PPTM.
You can generally have both the source PPT/PPTM and the addin code loaded in the IDE; just be sure you stay aware of which is which.
I made my own excel addin, however when I open it "normal.xlam" it does not load in the vba editor. How can I make it show up? I would like to edit it:)
The addin is added the normal way:
So I've created a Macro in a PowerPoint Presentation and I would like to make this Macro readily available to someone else. From what I have gathered, the best way to do this is to create an Add-in.
I have come across several articles stating to do the following, but I am still running into problems:
Open a new PowerPoint Presentation
Create a macro using VBA
Exit VBA, and save the Presentation as a .ppam
Under the Developer Tab, click on the "PowerPoint Add-ins" button
Click the "Add New..." option, and browse for your recently created
.ppam file
Click Load
Click Close
Click Add-ins
You should now see your new Add-in
I have done everything mentioned above and can even see the new Add-in when I select PowerPoint Add-Ins. I'm here because I can't find a way to run the new Add-in, and I don't want it to automatically load on startup or to interfere with the presentation by creating a button on the slides. As instead, I would like to allow the user to run this Add-in from the Ribbon.
Thoughts?
First, save as PPTM. THEN save as PPAM. If you only save as PPAM, you won't be able to go back and edit your code later to correct problems.
To launch your add-in from the ribbon, you must include RibbonX code (a type of XML) to your PPAM or PPTM (best to add it to the PPTM ... it'll become part of the PPAM automatically then).
There's an excellent book on RibbonX that'll save you hours of time:
http://www.amazon.com/RibbonX-Customizing-Office-2007-Ribbon/dp/0470191112
This is a good starting point if you don't want to buy the book:
https://blogs.msdn.microsoft.com/jensenh/tag/all-office-2007-ui-posts/
While you can manually unzip PPTM/PPTX/PPAM files and add the RibbonX code using any text editor, it's silly to do so. Instead use this free tool:
http://openxmldeveloper.org/blog/b/openxmldeveloper/archive/2009/08/07/7293.aspx
I have written 2 Macros in PowerPoint and added the Macros to a customized ribbon named 'My Ribbon' to make those macros available at a click of a button. The only problem is the Ribbon disappears when someone else opens the PowerPoint on a different computer. The macros stay with the file but the customized ribbons do not and we have to create another customized ribbon, and place both macros to the ribbon every time we share the file across our drive.(Which is quite annoying)
I want to permanently append the customized ribbon to the PowerPoint so that anyone who opens the PowerPoint will be able to see the personalized ribbon with both Macros already on their version of PowerPoint.
VBA macros are not designed for distributing the code on multiple PCs. If you need to get a solution which can be installed on other PCs you need to develop an add-in. That's exactly they were invented for. Moreover, you can create an installer for the add-in. It will be installed as other applications on your PC. See Walkthrough: Creating Your First Application-Level Add-in for PowerPoint to get started.
If you choose to stay with VBA macros, you will have to edit the open xml document. See Customize the Word Ribbon User Interface for more information. The process is common for almost all Office applications (Outlook does't support that).
You could use such a program like Ribbon Editor to customize the Ribbon for your pptm file only. (No need for an AddIn it you want it deployed only with the file)
I wrote an Excel VBA add-in over ten years ago, which uses the old Commandbars to put a menu in Excel's Tools menu (in Excel 2003 and earlier) or in Excel's Add-Ins tab (in Excel 2007 and later). I've never had a problem with the menu appearing, in all versions of Excel from 97 through 2013.
But now a user says Excel Add-Ins menu not appearing for him in Excel 2013. Normally that means the add-in isn't loaded, but in his case the add-in is loaded and working. We know the add-in is loaded and working because the add-in adds user-defined worksheet functions, and those UDFs are working fine for him. But he wants to get to the add-in's menu and can't.
My googling showed that some people are having trouble with the Add-Ins menu in 2013, but I didn't find anything specific to this problem.
Yes, he's tried enabling the Add-Ins tab in Excel Options > Customize the Ribbon.
BTW this is an .xla add-in, not a COM add-in.
Any suggestions?
I have Excel 2010 and had the add-in tab disappear for MrExcel HTML add-in. I tried all types of suggestions - and finally found one that worked for me!
Go to the add-ins folder where you have your add in saved. Right click on the file, and select Properties. At the bottom of the General tab - if it says "Security" - check on the "Unblock" option.
Voila! My add-ins never disappear anymore!
Solved:
Solved this now but really weird solution if you enabled the Add-in whilst the Analysis ToolPaks were enabled it'd have the issue you above, but if you enabled the Add-in whilst the Analysis ToolPaks weren't ticked then went back in to it and re-ticked the Analysis ToolPaks it'd be fine and wouldn't disappear!
Was an extremely strange issue!
See Spiceworks
As far as I understood this is a problem with Excel 2013 (another attempt of the guys at Redmond to make our lives miserable with every update of their products). The workaround I've found is to include the following code into the ThisWorkbook module of the Addin:
Private Sub Workbook_Open()
Workbook_AddinUninstall
Workbook_AddinInstall
End Sub
Cheers!
I had similar issue with excel 2013. Add-in tab was missing. I went to Developer>>>Add-Ins and deselected the add-in I wanted. Click OK then repeat the process and select the same add-in. Click OK. The Add-In tab should appear.
See also https://www.excelcampus.com/vba/add-in-ribbon-disappears/
As of july 2016 the security settings in Excel disable the add-ins in the old default location. THe website shows how to set the directory to trusted status
I had a similar problem where two .xlam files that loaded and appeared in custom ribbon tabs in Excel 2010 didn't show up in the ribbon in Excel 2013 even though they were loading each time a workbook was opened. I tried all sorts of solutions - disabling the Analysis Toolpack, disabling and enabling the .xlam files, making sure the .xlam's attached XML file was up to date (I was thinking an MSO image I had in the XML code was no longer available in Excel 2013), but nothing worked. I eventually tried copying and renaming the .xlam file and enabled it in Excel and, strangely, it appeared in the ribbon.
I have no idea why it needed to be copied and renamed - it's almost like Excel 2013 needed a fresh copy of the .xlam file before it could show up. Very weird!
I've been looking for this answer for a LONG time and the previous code worked, but, for me, only with Workbook_Open() instead of Thisworkbook_Open()
Private Sub Workbook_Open()
Workbook_AddinUninstall
Workbook_AddinInstall
End Sub
Thanks for finding this!
I disabled the add-ins via the Developer tab, and then enabled them via File>Options>Add-Ins>Manage Add-Ins.
Voila!
You can Try by disabling macros with notification. (tried on 2016)
File->options->trust center->macro settings-> tick disable all macros with notification
It worked for me .
If I disabled and enabled, I could get the Add-Ins tab to appear, but every time I opened a document I had to repeat. This seemed to fix it for me:
File > Options > AddIns > Choose "XML Expansion Packs" > Go > Select "Microsoft Action Pane 3" > Attach > Ok
I have had similar problems with Excel 2016 (not with 2010 and 2017), and very strangely it was solved this way :
1) Desactivating the add-in
2) Quitting Excel
3) Activating the add-in
4) Going to File > Close (in French version : Fichier > Fermer)
And when I click "Close" the "Components" menu suddenly appear in Excel 2016 !
Good luck !
Had a similar problem in Excel 2010. Tried all the suggestions above, but to no avail. In the end it turned out that even though it was an .xll add-in, it somehow also was listed as a COM add-in. So going to File > Options > Add-In, then selecting Disabled Items from the list at the bottom of that window and enabling the add-in, worked for me. Now in the list of Active Application Add-ins it shows both the original Excel Add-in, and the unexpected COM add-in without location. Oh, and the tab is back of course. Go figure.