I am trying to search for MSRP resources between given time range. I am trying to use below timeConstraint. (Made sure there are entries between that time range)
final Constraint timeConstraint = new RangeConstraint<Long>("timestamp_tl", until, cal.getTimeInMillis(), true);
"until" above is time in millis less than cal.getTimeInMillis(). Adding above timeConstraint to:
final ConstraintGroup mainConstraintGroup = new ConstraintGroup(Operator.And);
I added entries to MongoDB with additional property "timestamp_tl". Earlier I tried with just "timestamp".
In both cases I am getting error -
07.04.2017 17:08:00.100 *ERROR* [sling-default-4727-com.mycomp.proj.core.services.Mysearch.12850] com.mycomp.proj.core.services.MySearchTest Task failed!
java.lang.UnsupportedOperationException: Decimal searches not supported yet
at com.adobe.cq.social.sc.lucene.LuceneQueryFactory.getValueStringSolr(LuceneQueryFactory.java:554)
at com.adobe.cq.social.sc.lucene.LuceneQueryFactory.getValueString(LuceneQueryFactory.java:542)
at com.adobe.cq.social.sc.lucene.LuceneQueryFactory.getPropertyValueQuery(LuceneQueryFactory.java:511)
at com.adobe.cq.social.sc.lucene.LuceneQueryFactory.getComparisonQuery(LuceneQueryFactory.java:487)
at com.adobe.cq.social.sc.lucene.LuceneQueryFactory.mapConstraintToQueryAndFilter(LuceneQueryFactory.java:316)
at com.adobe.cq.social.sc.lucene.LuceneQueryFactory.mapConstraintToQueryAndFilter(LuceneQueryFactory.java:281)
at com.adobe.cq.social.sc.lucene.LuceneQueryFactory.mapConstraintToQueryAndFilter(LuceneQueryFactory.java:282)
at com.adobe.cq.social.sc.lucene.LuceneQueryFactory.getStatement(LuceneQueryFactory.java:164)
at com.adobe.cq.social.sc.lucene.QueryObjectModelImpl.getSelectorStatement(QueryObjectModelImpl.java:168)
at com.adobe.cq.social.sc.lucene.QueryObjectModelImpl.getStatement(QueryObjectModelImpl.java:109)
at com.adobe.cq.social.ugc.impl.LuceneUgcSearch.findCloudResources(LuceneUgcSearch.java:959)
at com.adobe.cq.social.ugc.impl.LuceneUgcSearch.find(LuceneUgcSearch.java:805)
at com.adobe.cq.social.ugc.impl.LuceneUgcSearch.find(LuceneUgcSearch.java:719)
at org.apache.sling.commons.scheduler.impl.QuartzJobExecutor.execute(QuartzJobExecutor.java:118)
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Any suggestions on what I might be doing wrong?
Thanks
I found that I need to use
final Constraint timeConstraint = new RangeConstraint<Date>("timestamp", until, cal.getTime(), true);
Above 'until' and 'cal.getTime()' are java.util.Date objects. I was assuming the "timestamp" value saved in MongoDB is "long" value since it was displaying as "NumberLong("1492006094509")"
Related
I am getting an exception when my column name contains hyphen "-"
Entity : this is the entity name.
#Entity
#Table(name = "RequestHeader")
public class RequestHeader implements Serializable {
....
....
#Column(name = "`oh-ordnbr`")
private Integer ohOrdnbr;
Schema definition: This is the query for schema creation.
CREATE MEMORY TABLE PUB.REQUESTHEADER(
REQUESTID INTEGER,
IMUSERID INTEGER,
REQUESTDATE DATE,
REQUESTTIME INTEGER,
REQUESTSTATUS VARCHAR(19),
REQUESTTYPE VARCHAR(22),
HEADERINSTRUCTIONS VARCHAR(5150),
DATEFORMAT VARCHAR(20),
TIMEFORMAT VARCHAR(20),
LANGUAGEID INTEGER,
"OH-ORDNBR" INTEGER,
"OH-TRCNSTAMP" INTEGER,
ISPICKUPLIST BIT(1),
CONSTRAINT "RQH-1" PRIMARY KEY(REQUESTID)
);
The error is below:
Exception Stack: Error message which I have received by running the Junit.
Caused by: org.hsqldb.HsqlException: user lacks privilege or object not found: THIS_.oh-ordnbr
at org.hsqldb.error.Error.error(Unknown Source)
at org.hsqldb.error.Error.error(Unknown Source)
at org.hsqldb.ExpressionColumn.checkColumnsResolved(Unknown Source)
at org.hsqldb.QueryExpression.resolve(Unknown Source)
at org.hsqldb.ParserDQL.compileCursorSpecification(Unknown Source)
at org.hsqldb.ParserCommand.compilePart(Unknown Source)
at org.hsqldb.ParserCommand.compileStatement(Unknown Source)
at org.hsqldb.Session.compileStatement(Unknown Source)
at org.hsqldb.StatementManager.compile(Unknown Source)
at org.hsqldb.Session.execute(Unknown Source)
Could some one help me in fixing this?
The reason for the object not found error is the fact that the oh-ordnbr column is defined to be case sensitive (this is due to the double quotes you put around it).
You have two possible solutions:
Do not use dashes (hyphens) in your SQL. It is bad practice anyway, use underscores instead.
Update the JPA annotation as follows:
#Column(name = "`OH-ORDNBR`")
private Integer ohOrdnbr;
I strongly recommend using underscores instead of dashes, you never know what weirdness different JPA implementations might have when using the second solution.
Check your configuration file has correct provider, I fixed same issue by providing org.hibernate.ejb.HibernatePersistence provider.
If HSQL Scripts are run via Java and if any new table query is followed by select/alter/update queries it always throws "user lacks privilege object". In reality the create queries after execution with Java Statements never gets commited into the DB and it is not persisted and we run our select/alter/update and it results in the exception. If we run the queries line by line and commit for each line, we could avoid this error.
I am trying to run the Protege Reasoner, there are two reasoner available Fact++ and HermiT 1.3.7.
I tried to run the both but their is window comes and suddenly goes. It's difficult to see that one so I use the screen recorder to get that but it doesn't contain any information.
There is no error message or log message I can found.
The reasoner is not being started.
I tried to use the option Export inferred axioms as ontology and then I get the expected error message "No Reasoner intialized"
Please suggest.
EDIT 1:
Error log due to the new data type defined:
org.semanticweb.owlapi.reasoner.ReasonerInternalException: Unsupported datatype
'http://www.semanticweb.org/q49f318b/ontologies/2014/6/untitled-ontology-6#perce
ntage'
at uk.ac.manchester.cs.factplusplus.FaCTPlusPlus.getBuiltInDataType(Nati
ve Method)
at uk.ac.manchester.cs.factplusplus.owlapiv3.FaCTPlusPlusReasoner.toData
TypePointer(Unknown Source)
at uk.ac.manchester.cs.factplusplus.owlapiv3.FaCTPlusPlusReasoner$AxiomT
ranslator$DeclarationVisitorEx.visit(Unknown Source)
at uk.ac.manchester.cs.factplusplus.owlapiv3.FaCTPlusPlusReasoner$AxiomT
ranslator$DeclarationVisitorEx.visit(Unknown Source)
at uk.ac.manchester.cs.owl.owlapi.OWLDatatypeImpl.accept(OWLDatatypeImpl
.java:338)
at uk.ac.manchester.cs.factplusplus.owlapiv3.FaCTPlusPlusReasoner$AxiomT
ranslator.visit(Unknown Source)
at uk.ac.manchester.cs.factplusplus.owlapiv3.FaCTPlusPlusReasoner$AxiomT
ranslator.visit(Unknown Source)
at uk.ac.manchester.cs.owl.owlapi.OWLDeclarationAxiomImpl.accept(OWLDecl
arationAxiomImpl.java:128)
at uk.ac.manchester.cs.factplusplus.owlapiv3.FaCTPlusPlusReasoner.loadAx
iom(Unknown Source)
at uk.ac.manchester.cs.factplusplus.owlapiv3.FaCTPlusPlusReasoner.loadRe
asonerAxioms(Unknown Source)
at uk.ac.manchester.cs.factplusplus.owlapiv3.FaCTPlusPlusReasoner.<init>
(Unknown Source)
at uk.ac.manchester.cs.factplusplus.owlapiv3.FaCTPlusPlusReasonerFactory
.createReasoner(Unknown Source)
at uk.ac.manchester.cs.factplusplus.owlapiv3.FaCTPlusPlusReasonerFactory
.createReasoner(Unknown Source)
at org.protege.editor.owl.model.inference.ReasonerUtilities.createReason
er(ReasonerUtilities.java:21)
at org.protege.editor.owl.model.inference.OWLReasonerManagerImpl$Classif
icationRunner.ensureRunningReasonerInitialized(OWLReasonerManagerImpl.java:398)
at org.protege.editor.owl.model.inference.OWLReasonerManagerImpl$Classif
icationRunner.run(OWLReasonerManagerImpl.java:354)
at java.lang.Thread.run(Thread.java:745)
Ontology in use:
http://pastebin.com/L0heDLBy
The stack trace confirms that FaCT++ does not allow custom datatypes to be specified - this is currently a known limitation. I don't know about HermiT but there's a good chance the problem is the same.
Pellet used to have more flexible datatype treatment, you can try installing it and use it instead of HermiT or FaCT++
It might be a trivial question but please share your experience with me.
I am using Jmeter in GUI mode and added an add on "Statistical Aggregate report" Listener.
But I am unable to interpret the Graph I am getting from this Listener.How could it be useful for the performance testing. What sort of information I am getting ?
Thanks in advance
Suppose you've better study theoretical info about performance/load-testing artifacts and metrics first and than decide which listeners/graphs are necessary for your testing.
You could also look onto jmeter-plugins graphs - they are in many cases more informative/descriptive than jmeter's ones.
UPDATED:
Statistical Aggregate Report listener is kind of combination of Graph Results and Aggregate Report listeners into one chart where you get statistic for 2 important performance characteristics measurements - throughput (hits/sec) + Avg. Response Time (msec) - across the test execution time.
See both listeners descriptions for details about characteristics they are measuring:
The throughput number represents the actual number of requests/minute
the server handled. This calculation includes any delays you added to
your test and JMeter's own internal processing time. The advantage of
doing the calculation like this is that this number represents
something real - your server in fact handled that many requests per
minute, and you can increase the number of threads and/or decrease the
delays to discover your server's maximum throughput.
Roughly:
response time = "time to last byte"
latency = "time to first byte"
throughput = number of requests / time unit
For programming realization I'd better look into source code available.
I found an issue will be occurred with the third party Listener plugin "Statistical Aggregate Report" while we clear the Test Results in JMeter
Stack Trace :
ERROR - jmeter.JMeter: Uncaught exception: java.lang.AbstractMethodError
at org.apache.jmeter.gui.action.Clear.doAction(Clear.java:76)
at org.apache.jmeter.gui.action.ActionRouter.performAction(ActionRouter.java:81)
at org.apache.jmeter.gui.action.ActionRouter.access$000(ActionRouter.java:40)
at org.apache.jmeter.gui.action.ActionRouter$1.run(ActionRouter.java:63)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
at java.awt.EventQueue.access$500(Unknown Source)
at java.awt.EventQueue$3.run(Unknown Source)
at java.awt.EventQueue$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
I'm new to SoapUI and Groovy, but an experienced Java programmer.
I created a TestCase with two Test Steps:
Properties step called CID with single property correlationID and value ${=java.util.UUID.randomUUID()}.
Test Request where I put <CorrelationID>${correlationID}</CorrelationID> in the request.
It works perfectly and submits unique CorrelationID value every time I run my tests.
Now I want to add new Script Assertion to Test Step 2 (Test Request) that compares computed correlationID property value from Test Step 1 (CID) with some data from Test Step 2 response. The problem is that I can not seem to be able to access generated value of correlationID from there.
If I try this: log.info "${correlationId}"
I get: No such property: correlationId for class: Script19
If I try this: log.info "${CID#correlationId}"
I get:
startup failed:
Script43.groovy: 1: unexpected char: '#' # line 1, column 16.
log.info "${CID#correlationId}"
^
org.codehaus.groovy.syntax.SyntaxException: unexpected char: '#' # line 1, column 16.
at org.codehaus.groovy.antlr.AntlrParserPlugin.transformCSTIntoAST(AntlrParserPlugin.java:97)
at org.codehaus.groovy.antlr.AntlrParserPlugin.parseCST(AntlrParserPlugin.java:71)
at org.codehaus.groovy.control.SourceUnit.parse(SourceUnit.java:236)
at org.codehaus.groovy.control.CompilationUnit$1.call(CompilationUnit.java:158)
at org.codehaus.groovy.control.CompilationUnit.applyToSourceUnits(CompilationUnit.java:814)
at org.codehaus.groovy.control.CompilationUnit.doPhaseOperation(CompilationUnit.java:511)
at org.codehaus.groovy.control.CompilationUnit.processPhaseOperations(CompilationUnit.java:487)
at org.codehaus.groovy.control.CompilationUnit.compile(CompilationUnit.java:464)
at groovy.lang.GroovyClassLoader.doParseClass(GroovyClassLoader.java:306)
at groovy.lang.GroovyClassLoader.parseClass(GroovyClassLoader.java:287)
at groovy.lang.GroovyShell.parseClass(GroovyShell.java:727)
at groovy.lang.GroovyShell.parse(GroovyShell.java:739)
at groovy.lang.GroovyShell.parse(GroovyShell.java:766)
at groovy.lang.GroovyShell.parse(GroovyShell.java:757)
at com.eviware.soapui.support.scripting.groovy.SoapUIGroovyScriptEngine.compile(SoapUIGroovyScriptEngine.java:148)
at com.eviware.soapui.support.scripting.groovy.SoapUIGroovyScriptEngine.run(SoapUIGroovyScriptEngine.java:93)
at com.eviware.soapui.impl.wsdl.teststeps.assertions.basic.GroovyScriptAssertion.assertScript(GroovyScriptAssertion.java:116)
at com.eviware.soapui.impl.wsdl.teststeps.assertions.basic.GroovyScriptAssertion.internalAssertResponse(GroovyScriptAssertion.java:133)
at com.eviware.soapui.impl.wsdl.teststeps.WsdlMessageAssertion.assertResponse(WsdlMessageAssertion.java:156)
at com.eviware.soapui.impl.wsdl.teststeps.WsdlTestRequest.assertResponse(WsdlTestRequest.java:189)
at com.eviware.soapui.impl.wsdl.teststeps.WsdlTestRequest.setResponse(WsdlTestRequest.java:159)
at com.eviware.soapui.impl.wsdl.teststeps.WsdlTestRequestStep.run(WsdlTestRequestStep.java:346)
at com.eviware.soapui.impl.wsdl.testcase.WsdlTestCaseRunner.runTestStep(WsdlTestCaseRunner.java:207)
at com.eviware.soapui.impl.wsdl.testcase.WsdlTestCaseRunner.internalRun(WsdlTestCaseRunner.java:138)
at com.eviware.soapui.impl.wsdl.testcase.WsdlTestCaseRunner.internalRun(WsdlTestCaseRunner.java:39)
at com.eviware.soapui.impl.wsdl.support.AbstractTestRunner.run(AbstractTestRunner.java:135)
at java.util.concurrent.Executors$RunnableAdapter.call(Unknown Source)
at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
at java.util.concurrent.FutureTask.run(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: Script43.groovy:1:16: unexpected char: '#'
at org.codehaus.groovy.antlr.parser.GroovyLexer.nextToken(GroovyLexer.java:695)
at org.codehaus.groovy.antlr.parser.GroovyLexer$1.nextToken(GroovyLexer.java:248)
at groovyjarjarantlr.TokenBuffer.fill(TokenBuffer.java:69)
at groovyjarjarantlr.TokenBuffer.LA(TokenBuffer.java:80)
at groovyjarjarantlr.LLkParser.LA(LLkParser.java:52)
at org.codehaus.groovy.antlr.parser.GroovyRecognizer.nls(GroovyRecognizer.java:780)
at org.codehaus.groovy.antlr.parser.GroovyRecognizer.openOrClosableBlock(GroovyRecognizer.java:8848)
at org.codehaus.groovy.antlr.parser.GroovyRecognizer.stringConstructorValuePart(GroovyRecognizer.java:13449)
at org.codehaus.groovy.antlr.parser.GroovyRecognizer.stringConstructorExpression(GroovyRecognizer.java:11932)
at org.codehaus.groovy.antlr.parser.GroovyRecognizer.primaryExpression(GroovyRecognizer.java:11091)
at org.codehaus.groovy.antlr.parser.GroovyRecognizer.argumentLabel(GroovyRecognizer.java:10863)
at org.codehaus.groovy.antlr.parser.GroovyRecognizer.commandArgument(GroovyRecognizer.java:10756)
at org.codehaus.groovy.antlr.parser.GroovyRecognizer.commandArguments(GroovyRecognizer.java:10173)
at org.codehaus.groovy.antlr.parser.GroovyRecognizer.expressionStatement(GroovyRecognizer.java:8948)
at org.codehaus.groovy.antlr.parser.GroovyRecognizer.statement(GroovyRecognizer.java:1258)
at org.codehaus.groovy.antlr.parser.GroovyRecognizer.compilationUnit(GroovyRecognizer.java:650)
at org.codehaus.groovy.antlr.AntlrParserPlugin.transformCSTIntoAST(AntlrParserPlugin.java:93)
... 31 more
1 error
How can I access that correlationId computed value from my assertion Groovy script?
Thank you
The problem with my approach was that even if I do access the property, it is dynamic and my UUID is different each time I read the value of the property.
Instead I replaced my Properties test step with Setup Script of the Test Case:
uuid = context.expand('${=java.util.UUID.randomUUID()}')
testRunner.testCase.setPropertyValue("correlationID", uuid)
Each time my test case executes, a new uuid is generated. Then future test steps may access this static test case level property.
In my Test Request I use:
<CorrelationID>${#TestCase#correlationID}</CorrelationID>
In script assertion I use:
correlationID = context.expand('${#TestCase#correlationID}')
Thanks to Unhandled from SoapUI forums.
Wanted to add that context.getPropertyNames() or context.getProperties() does not list the properties defined in a 'Property' Test step.
Only context.expand('') works.
To get the property names of current Test Step from Script Assertion, we can use the following codes -
def testStepProp = context.getCurrentStep().getPropertyNames()
for(i=0; i<testStepProp.size(); i++){
log.info testStepProp[i]
}
To get the property names of current Test Case from Script Assertion, we can use the following codes:
def testCaseProp = context.testCase.getPropertyNames()
for(i=0; i<testCaseProp .size(); i++){
log.info testCaseProp[i]
}
To get a property value from script Assertion:
For Example if my property name is 'correlationID' -
def myValue = context.testCase.getPropertyValue("correlationID") //If we are in same testCase
def myValue = context.testCase.testSuite.testCases["testCaseName"].getPropertyValue("correlationID") //If we are in different testCase
Please note that 'testRunner' doesn't work in script Assertion. Instead we need to use context.
I am using HSQLDB as my database. i want to get a primary key of latest inserted row. for that i have return a query in my java class as below:
final String query = "INSERT INTO polling_log (start_date,status,action) VALUES(CURRENT_TIMESTAMP,?,?); CALL IDENTITY();";
GeneratedKeyHolder generatedKeyHolder = new GeneratedKeyHolder();
int update = adapterJdbcTemplate.update(new PreparedStatementCreator() {
#Override
public PreparedStatement createPreparedStatement(
Connection connection) throws SQLException {
PreparedStatement preparedStatement = connection
.prepareStatement(query);
preparedStatement.setInt(1, pollingLogVO.getStatus());
preparedStatement.setString(2, pollingLogVO.getAction());
System.out.println(preparedStatement.getGeneratedKeys().getFetchSize());
return preparedStatement;
}
}, generatedKeyHolder);
System.out.println("###################### "+ update);
Number logId = generatedKeyHolder.getKey();
pollingLogId = logId.intValue();
and to store the query i have used GeneratedKeyHolder. but while runing this i get an exception:
org.springframework.jdbc.BadSqlGrammarException: PreparedStatementCallback; bad SQL grammar []; nested exception is java.sql.SQLException: unexpected token: IDENTITY
at org.springframework.jdbc.support.SQLStateSQLExceptionTranslator.doTranslate(SQLStateSQLExceptionTranslator.java:98)
at org.springframework.jdbc.support.AbstractFallbackSQLExceptionTranslator.translate(AbstractFallbackSQLExceptionTranslator.java:72)
at org.springframework.jdbc.support.AbstractFallbackSQLExceptionTranslator.translate(AbstractFallbackSQLExceptionTranslator.java:80)
at org.springframework.jdbc.support.AbstractFallbackSQLExceptionTranslator.translate(AbstractFallbackSQLExceptionTranslator.java:80)
at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:602)
at org.springframework.jdbc.core.JdbcTemplate.update(JdbcTemplate.java:817)
at com.platysgroup.lmex.adapter.moodle.dao.LogDao.insertPollingLog(LogDao.java:36)
at com.platysgroup.lmex.adapter.MoodlePostingTask.insertPollingLog(MoodlePostingTask.java:134)
at com.platysgroup.lmex.adapter.MoodlePostingTask.run(MoodlePostingTask.java:55)
at java.util.TimerThread.mainLoop(Timer.java:512)
at java.util.TimerThread.run(Timer.java:462)
Caused by: java.sql.SQLException: unexpected token: IDENTITY
at org.hsqldb.jdbc.Util.sqlException(Unknown Source)
at org.hsqldb.jdbc.JDBCPreparedStatement.<init>(Unknown Source)
at org.hsqldb.jdbc.JDBCConnection.prepareStatement(Unknown Source)
at org.apache.commons.dbcp.DelegatingConnection.prepareStatement(DelegatingConnection.java:248)
at org.apache.commons.dbcp.PoolingDataSource$PoolGuardConnectionWrapper.prepareStatement(PoolingDataSource.java:302)
at com.platysgroup.lmex.adapter.moodle.dao.LogDao$1.createPreparedStatement(LogDao.java:41)
at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:580)
... 6 more
Caused by: org.hsqldb.HsqlException: unexpected token: IDENTITY
at org.hsqldb.error.Error.parseError(Unknown Source)
at org.hsqldb.ParserBase.unexpectedToken(Unknown Source)
at org.hsqldb.ParserCommand.compileStatement(Unknown Source)
at org.hsqldb.Session.compileStatement(Unknown Source)
at org.hsqldb.StatementManager.compile(Unknown Source)
at org.hsqldb.Session.execute(Unknown Source)
... 12 more
The problem is with this line (wrapped for clarity):
final String query = "INSERT INTO polling_log (start_date,status,action) VALUES(CURRENT_TIMESTAMP,?,?); CALL IDENTITY();";
The issue is that IDENTITY is a reserved word in SQL; it's got a meaning pre-defined already and so can't be used like that in a CALL statement. (I don't know what it is actually used for; the full definition of SQL is huge and has a very large number of reserved words.) The immediate work around would be to enclose the problem word in double quotes (which would need to be backslash-quoted because of being in a Java string):
final String query = "INSERT INTO polling_log (start_date,status,action) VALUES(CURRENT_TIMESTAMP,?,?); CALL \"IDENTITY\"();";
However, if you're just calling that to get the inserted row, STOP! Just let Spring do the work for you, assuming you have JDBC 3.0 or later (i.e., Java 5 or later).
As far as I know you cannot put more than one statements into one string to be executed. Execute two separate operations instead of this.
The following link has what you need:
http://www.devdaily.com/blog/post/jdbc/spring-jdbc-insert-auto-generated-key