I am installing apache httpd 2.4.x on AIX 7.1 machine using xlc compiler. Make is successful. But make install is failing with the following error
Making install in modules Making install in aaa rm -f /home/u980868/apache/kiran/httpd-kiran/modules/mod_authn_file.so /home/u980868/apache/kiran/httpd-2.4.25/srclib/apr/libtool --silent --mode=install install mod_authn_file.la /home/u980868/apache/kiran/httpd-kiran/modules/ find: bad status-- /home/u980868/apache/kiran/httpd-kiran/modules/mod_authn_file.so install: File mod_authn_file.so was not found. make: 1254-004 The error code from the last command is 2. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop.
can someone please help.
Related
I am installing linux kernel 5.8.10 in my existing Ubuntu system.
After going all the steps. When I started to install modules by command sudo make modules_install , I found 2 errors.
I can't find any way to solve it. Please help if anyone familiar with this kind of errors.
Errors:
cp: cannot stat 'net/atm/atm.ko' : No such file or directory
make[1]: ***[scripts/Makefile.modinst:33: net/atm/atm.ko] Error 1
make: *** [Makefile:1387: _modinst_] Error 2
currenty I'm trying to install Riak on the Raspberry Pi 3 for testing purposes. I used the following instruction from basho:
http://docs.basho.com/riak/kv/2.2.2/setup/installing/source/
I'm having problems compiling it from source. I tried to compile it on Raspbian Jessie and then switched to Ubuntu Server 16.04. Both times with the same result. It is not compiling and aborts at a certain point. I don't know what causes the problem since it only says: recipe for target 'util/perf_count.o' failed. Searching Google and the mailing list from basho weren't successful.
The version of gcc is gcc (Raspbian 4.9.2-10) 4.9.2. The version of Erlang is Erlang R16B02_basho8 (erts-5.10.3)
The commands i used are the following:
Installing Erlang:
wget http://s3.amazonaws.com/downloads.basho.com/erlang/otp_src_R16B02basho10.tar.gz
tar zxvf otp_src_R16B02-basho10.tar.gz
cd OTP_R16B02_basho10
./otp_build autoconf
./configure && make && sudo make install
Installing Riak:
wget http://s3.amazonaws.com/downloads.basho.com/riak/2.2/2.2.1/riak-2.2.1.tar.gz
tar zxvf riak-2.2.1.tar.gz
cd riak-2.2.1
make locked-deps
make rel
Any suggestions are welcome.
Output:
`./include/leveldb/atomics.h:155:15: note:
template argument deduction/substitution failed util/perf_count.cc:439:40:
note: deduced conflicting types for parameter ‘ValueT’
(‘unsigned int’ and‘int’ add_and_fetch(ptr_32, 1);`
`Makefile:190: recipe for target 'util/perf_count.o' failed
make[1]: *** [util/perf_count.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory '/home/pi/Riak/riak/deps/eleveldb/c_src/leveldb'
ERROR: Command [compile] failed!
Makefile:23: recipe for target 'compile' failed
make: *** [compile] Error 1`
After digging deeper I got some help from Basho's mailing list (many thanks).
The Link below shows the steps to solve this problem:
http://lists.basho.com/pipermail/riak-users_lists.basho.com/2017-April/019187.html
The next link is a detailed instruction, which helps to install Riak on the Raspberry Pi 3:
http://docs.basho.com/riak/kv/2.2.2/setup/installing/source/
I have searched the internet all weekend and cannot find anyone who has had a similar error. I am trying to install libapache-mod-factcgi but the package errors out and I cannot figure out why.
pi#applejacks:/tmp $ sudo apt-get source -b libapache2-mod-fastcgi
Reading package lists... Done
Building dependency tree
Reading state information... Done
Skipping already downloaded file 'libapache-mod-fastcgi_2.4.7~0910052141-1.1+deb8u1.dsc'
Skipping already downloaded file 'libapache-mod-fastcgi_2.4.7~0910052141.orig.tar.gz'
Skipping already downloaded file 'libapache-mod-fastcgi_2.4.7~0910052141-1.1+deb8u1.diff.gz'
Need to get 0 B of source archives.
Skipping unpack of already unpacked source in libapache-mod-fastcgi-2.4.7~0910052141
dpkg-buildpackage: source package libapache-mod-fastcgi
dpkg-buildpackage: source version 2.4.7~0910052141-1.1+deb8u1
dpkg-buildpackage: source distribution jessie
dpkg-buildpackage: source changed by Andreas Beckmann <anbe#debian.org>
dpkg-buildpackage: host architecture armhf
dpkg-source --before-build libapache-mod-fastcgi-2.4.7~0910052141
debian/rules clean
dh_listpackages: Please specify the compatibility level in debian/compat
dh_listpackages: Compatibility levels before 5 are no longer supported (level 1 requested)
/usr/share/cdbs/1/rules/dpatch.mk:33: CDBS WARNING: dpatch.mk is deprecated since 0.4.85 - please use source format 3.0 (quilt) instead
test -x debian/rules
rmdir /tmp/libapache-mod-fastcgi-2.4.7~0910052141/build-tmp
rmdir: failed to remove ‘/tmp/libapache-mod-fastcgi-2.4.7~0910052141/build-tmp’: No such file or directory
/usr/share/cdbs/1/rules/buildcore.mk:46: recipe for target 'cleanbuilddir' failed
make: [cleanbuilddir] Error 1 (ignored)
dh_clean
dh_clean: Please specify the compatibility level in debian/compat
/usr/share/cdbs/1/rules/debhelper.mk:189: recipe for target 'clean' failed
make: *** [clean] Error 2
dpkg-buildpackage: error: debian/rules clean gave error exit status 2
Build command 'cd libapache-mod-fastcgi-2.4.7~0910052141 && dpkg-buildpackage -b -uc' failed.
E: Child process failed
I'm trying to build Apache2 on RPi also. These commands got the .deb building for me:
cd libapache-mod-fastcgi-2.4.7~0910052141;
echo 10 > debian/compat;
dpkg-buildpackage -b -uc
Then cd .. to go one level up, then install the package with dpkg -i ./libapache2-mod-fastcgi_2.4.7~0910052141-1.1+deb8u1_armhf.deb
When i am trying to install apache server it showed the following error on ./configure
checking for APR... configure: WARNING: APR version 1.4.0 or later is required, found 1.3.8
configure: WARNING: skipped APR at apr-1-config, version not acceptable
no
configure: error: APR not found. Please read the documentation
.
So i tried to upgrade to apr-1.4.6.I downloaded the tarball and extracted it.
Also make got the following error
libtool: link: you must specify an output file
libtool: link: Try `libtool --help --mode=link' for more information.
make[1]: *** [libapr-.la] Error 1
make[1]: Leaving directory `/root/Desktop/apr'
make: *** [all-recursive] Error 1
still i proceeded for make install
On make install i got the following error
libtool: link: you must specify an output file
libtool: link: Try `libtool --help --mode=link' for more information.
make: *** [libapr-.la] Error 1
Any help How to solve this out??
I need to upgrade from apache 2.2.4 to apache 2.4.4.
Any alternative suggestions are welcome
I'm trying to install Wordnet 3.0 on my Mac which is OSX 10.8.
I've configured it, but when I try make,
I get a bunch of errors...
.....
/usr/include/tkDecls.h:1692: error: expected specifier-qualifier-list before ‘XColor’
make[2]: *** [wishwn-tkAppInit.o] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
and then if I proceed with make install
Making install in doc
Making install in html
make[3]: Nothing to be done for `install-exec-am'.
test -z "/usr/local/WordNet-3.0/doc/html" || /Users/ravenyj/Desktop/WordNet-3.0/install-sh -d "/usr/local/WordNet-3.0/doc/html"
mkdir: /usr/local/WordNet-3.0: Permission denied
make[3]: *** [install-htmlDATA] Error 1
make[2]: *** [install-am] Error 2
make[1]: *** [install-recursive] Error 1
make: *** [install-recursive] Error 1
I have not made any modification to Makefile, and don't know if I should.
Could anyone please help me out on this?
Using brew is orders of magnitude simpler. Just:
brew install wordnet
The following worked for me to get it to compile:
./configure CFLAGS="-I/usr/X11R6/include -L/usr/X11R6/lib -lX11 -fpermissive" CC=/usr/bin/gcc
then
make
sudo make install
after that it's showing up fine for me in
/usr/local/WordNet-3.0/
I then added WordNet to my $PATH by editing my .bash_profile file, adding the line:
export PATH=/usr/local/WordNet-3.0/bin:$PATH
opening a new Terminal window, I could then type:
$ wn
and see that it's now working fine
Do the following to install WordNet in fastest manner:
Press Command+Space and type Terminal and press enter/return key.
Run in Terminal app:
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" < /dev/null 2> /dev/null
...and press enter/return key. Wait for the command to finish.
Run:
brew install wordnet
After installation use 'wn' command in terminal to access the application.
I had the same problem too until I saw this webpage: http://ticanchang.blogspot.com/2010/04/install-wordnet-in-mac.html
In the folder of your downloaded WordNet package, type:
./configure
make
sudo make install
You need to include "sudo" because normally a user do not have the permission to update the /usr/local folder.