I have searched the internet all weekend and cannot find anyone who has had a similar error. I am trying to install libapache-mod-factcgi but the package errors out and I cannot figure out why.
pi#applejacks:/tmp $ sudo apt-get source -b libapache2-mod-fastcgi
Reading package lists... Done
Building dependency tree
Reading state information... Done
Skipping already downloaded file 'libapache-mod-fastcgi_2.4.7~0910052141-1.1+deb8u1.dsc'
Skipping already downloaded file 'libapache-mod-fastcgi_2.4.7~0910052141.orig.tar.gz'
Skipping already downloaded file 'libapache-mod-fastcgi_2.4.7~0910052141-1.1+deb8u1.diff.gz'
Need to get 0 B of source archives.
Skipping unpack of already unpacked source in libapache-mod-fastcgi-2.4.7~0910052141
dpkg-buildpackage: source package libapache-mod-fastcgi
dpkg-buildpackage: source version 2.4.7~0910052141-1.1+deb8u1
dpkg-buildpackage: source distribution jessie
dpkg-buildpackage: source changed by Andreas Beckmann <anbe#debian.org>
dpkg-buildpackage: host architecture armhf
dpkg-source --before-build libapache-mod-fastcgi-2.4.7~0910052141
debian/rules clean
dh_listpackages: Please specify the compatibility level in debian/compat
dh_listpackages: Compatibility levels before 5 are no longer supported (level 1 requested)
/usr/share/cdbs/1/rules/dpatch.mk:33: CDBS WARNING: dpatch.mk is deprecated since 0.4.85 - please use source format 3.0 (quilt) instead
test -x debian/rules
rmdir /tmp/libapache-mod-fastcgi-2.4.7~0910052141/build-tmp
rmdir: failed to remove ‘/tmp/libapache-mod-fastcgi-2.4.7~0910052141/build-tmp’: No such file or directory
/usr/share/cdbs/1/rules/buildcore.mk:46: recipe for target 'cleanbuilddir' failed
make: [cleanbuilddir] Error 1 (ignored)
dh_clean
dh_clean: Please specify the compatibility level in debian/compat
/usr/share/cdbs/1/rules/debhelper.mk:189: recipe for target 'clean' failed
make: *** [clean] Error 2
dpkg-buildpackage: error: debian/rules clean gave error exit status 2
Build command 'cd libapache-mod-fastcgi-2.4.7~0910052141 && dpkg-buildpackage -b -uc' failed.
E: Child process failed
I'm trying to build Apache2 on RPi also. These commands got the .deb building for me:
cd libapache-mod-fastcgi-2.4.7~0910052141;
echo 10 > debian/compat;
dpkg-buildpackage -b -uc
Then cd .. to go one level up, then install the package with dpkg -i ./libapache2-mod-fastcgi_2.4.7~0910052141-1.1+deb8u1_armhf.deb
Related
I'm building drake from source, specifically this branch of Russ' fork:
https://github.com/RussTedrake/drake
everything worked without issue until the last command make -j
where I get the following output:
[ 12%] Performing build step for 'drake_cxx_python'
INFO: Analyzed target //:install (0 packages loaded, 0 targets configured).
INFO: Found 1 target...
ERROR: /Users/chewchiashaoyuan/Documents/Software/drake/bindings/pydrake/BUILD.bazel:780:22: GenerateMypyStubs bindings/pydrake/pydrake/__init__.pyi failed: (Exit 1): stubgen failed: error executing command bazel-out/darwin-opt/bin/bindings/pydrake/stubgen --quiet '--package=pydrake' '--output=bazel-out/darwin-opt/bin/bindings/pydrake'
Use --sandbox_debug to see verbose messages from the sandbox and retain the sandbox build root for debugging
Matplotlib created a temporary config/cache directory at /var/folders/sl/37m0k__51_3_5c5j02w201r40000gn/T/matplotlib-8mr5qkfg because the default path (/Users/chewchiashaoyuan/.matplotlib) is not a writable directory; it is highly recommended to set the MPLCONFIGDIR environment variable to a writable directory, in particular to speed up the import of Matplotlib and to better support multiprocessing.
Critical error during semantic analysis: /usr/local/lib/python3.10/site-packages/pydrake/symbolic.pyi:203: error: invalid syntax
Target //:install failed to build
Use --verbose_failures to see the command lines of failed build steps.
ERROR: /Users/chewchiashaoyuan/Documents/Software/drake/BUILD.bazel:63:8 Middleman _middlemen/install-runfiles failed: (Exit 1): stubgen failed: error executing command bazel-out/darwin-opt/bin/bindings/pydrake/stubgen --quiet '--package=pydrake' '--output=bazel-out/darwin-opt/bin/bindings/pydrake'
Use --sandbox_debug to see verbose messages from the sandbox and retain the sandbox build root for debugging
INFO: Elapsed time: 9.617s, Critical Path: 9.33s
INFO: 2 processes: 2 internal.
FAILED: Build did NOT complete successfully
make[2]: *** [drake_cxx_python-prefix/src/drake_cxx_python-stamp/drake_cxx_python-build] Error 1
make[1]: *** [CMakeFiles/drake_cxx_python.dir/all] Error 2
make: *** [all] Error 2
My operating system is:
macOS Monterey Version 12.6
The full make -j -d output is here
I referenced https://drake.mit.edu/from_source.html, https://drake.mit.edu/bazel.html#snopt and https://github.com/RobotLocomotion/drake/issues/12175
I did the following:
git clone https://github.com/RussTedrake/drake
cd drake
git checkout kin_traj_opt2
./setup/mac/install_prereqs.sh
cd ..
mkdir drake-build
cd drake-build
cmake -DWITH_ROBOTLOCOMOTION_SNOPT=ON ../drake
make -j
Fixes attempted:
tried deleting the whole drake-build directory and doing the whole process from scratch, got the same errors
One filename from the error message stands out: /usr/local/lib/python3.10/site-packages/pydrake/symbolic.pyi. It looks like you have sudo pip install drake installed into a system-wide directory. That is likely interfering with the from-source build of Drake and will need to be removed.
Here is the error I'm getting when trying to deploy to Heroku using the most recent stack (20)
Gem::Ext::BuildError: ERROR: Failed to build gem native extension.
current directory:
/tmp/build_20bfe735/vendor/bundle/ruby/2.6.0/gems/prawn-gmagick-0.0.9/ext/image
/tmp/build_20bfe735/vendor/ruby-2.6.6/bin/ruby -I
/tmp/build_20bfe735/vendor/ruby-2.6.6/lib/ruby/2.6.0 -r
./siteconf20210328-11397-1gaqmyj.rb extconf.rb
creating Makefile
current directory:
/tmp/build_20bfe735/vendor/bundle/ruby/2.6.0/gems/prawn-gmagick-0.0.9/ext/image
make "DESTDIR=" clean
current directory:
/tmp/build_20bfe735/vendor/bundle/ruby/2.6.0/gems/prawn-gmagick-0.0.9/ext/image
make "DESTDIR="
compiling image.c
image.c:3:10: fatal error: wand/magick_wand.h: No such file or directory
3 | #include <wand/magick_wand.h>
| ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
make: *** [Makefile:245: image.o] Error 1
make failed, exit code 2
Same error after I tried this buildpack with graphicsmagick
https://elements.heroku.com/buildpacks/bogini/heroku-buildpack-graphicsmagick
So, after playing a bit I made it work by adding 3 additional dependencies to the Aptfile in the example above
libgraphicsmagick++3
libgraphicsmagick++1-dev
libgraphicsmagick-q16-3
So the final Aptfile looks like this
debhelper
g++
gsfonts
libbz2-dev
libexif-dev
libfreetype6-dev
libice-dev
libjbig-dev
libjpeg-dev
liblcms2-dev
libltdl-dev
libpng-dev
libsm-dev
libtiff-dev
libwebp-dev
libwmf-dev
libx11-dev
libxext-dev
libxml2-dev
perl
sharutils
transfig
x11proto-core-dev
zlib1g-dev
libgraphicsmagick++3
libgraphicsmagick++1-dev
libgraphicsmagick-q16-3
And my buildpacks setup:
1. https://github.com/heroku/heroku-buildpack-apt
2. https://github.com/bogini/heroku-buildpack-graphicsmagick
3. heroku/ruby
Do you guys see any problem with any of those dependencies and setup?
currenty I'm trying to install Riak on the Raspberry Pi 3 for testing purposes. I used the following instruction from basho:
http://docs.basho.com/riak/kv/2.2.2/setup/installing/source/
I'm having problems compiling it from source. I tried to compile it on Raspbian Jessie and then switched to Ubuntu Server 16.04. Both times with the same result. It is not compiling and aborts at a certain point. I don't know what causes the problem since it only says: recipe for target 'util/perf_count.o' failed. Searching Google and the mailing list from basho weren't successful.
The version of gcc is gcc (Raspbian 4.9.2-10) 4.9.2. The version of Erlang is Erlang R16B02_basho8 (erts-5.10.3)
The commands i used are the following:
Installing Erlang:
wget http://s3.amazonaws.com/downloads.basho.com/erlang/otp_src_R16B02basho10.tar.gz
tar zxvf otp_src_R16B02-basho10.tar.gz
cd OTP_R16B02_basho10
./otp_build autoconf
./configure && make && sudo make install
Installing Riak:
wget http://s3.amazonaws.com/downloads.basho.com/riak/2.2/2.2.1/riak-2.2.1.tar.gz
tar zxvf riak-2.2.1.tar.gz
cd riak-2.2.1
make locked-deps
make rel
Any suggestions are welcome.
Output:
`./include/leveldb/atomics.h:155:15: note:
template argument deduction/substitution failed util/perf_count.cc:439:40:
note: deduced conflicting types for parameter ‘ValueT’
(‘unsigned int’ and‘int’ add_and_fetch(ptr_32, 1);`
`Makefile:190: recipe for target 'util/perf_count.o' failed
make[1]: *** [util/perf_count.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory '/home/pi/Riak/riak/deps/eleveldb/c_src/leveldb'
ERROR: Command [compile] failed!
Makefile:23: recipe for target 'compile' failed
make: *** [compile] Error 1`
After digging deeper I got some help from Basho's mailing list (many thanks).
The Link below shows the steps to solve this problem:
http://lists.basho.com/pipermail/riak-users_lists.basho.com/2017-April/019187.html
The next link is a detailed instruction, which helps to install Riak on the Raspberry Pi 3:
http://docs.basho.com/riak/kv/2.2.2/setup/installing/source/
I am installing NS2 2.35 in my macbook having OS X 10.10.4. The Xcode which i have install is Xcode 6.4. While installing I am getting following error:
ld: symbol (s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make: *** [octlsh] Error 1
octl-1.14 make failed! Exiting...
From the following link I have downloaded NS2:
https://drive.google.com/file/d/0B7S255p3kFXNSGJCZ2YzUGJDVk0/view
Following steps I have use to install NS2:
Install Xcode
Unzip or untar ns-2.35 using the command "tar zxvf ns-allinone-2.35-xxx.tar.gz" (without quotes)
The ns-2.35 configuration files contains the path to xlibdir and xincdir, so you need not include the path for those directories.
kindly ensure that the path to xlibdir and xincdir are installed on your Mac OS(Xcode)
execute the command ./install inside the directory (~ns-allinone-2.35-xxx/) (use terminal to install) .
Once installed successfully, the path setting information will be provided to you. copy those informations and put it in a file called .profile or .bash_profile (please note that there is a dot in these files)
finally execute the command "source .profile" (wihtout quotes) and logout and login back.
After step 5 i.e. ./install i got above mentioned error.
Kindly help me to solve this problem.
clang: error: linker command failed with exit code 1
The version you got is my "Oct 2014 update" ns-allinone-2.35_gcc482.tar.gz, for gcc/g++ versions 4.6 .. 5.2 . Not clang, AFAIK.
Path´s : # cd ns-2.35/ && make install ; cd ../nam-1.15/ && make install
P.S. : There's a patch for OS X 10 → http://myns2work.blogspot.dk/2013/08/installing-ns-235-on-mountain-lion-and.html
Ref. Google, ns-allinone-2.35 with OS X 10 https://www.google.com/webhp?hl=all&gws_rd=ssl#hl=en&q=ns-allinone-2.35+with+OS+X+10
I have followed the instructions on this website for installing RMySQL on my 64 bit Windows 7 machine: http://www.ahschulz.de/2013/07/23/installing-rmysql-under-windows/
However I get the following error message: Any ideas? I have searched for some time for an answer with no luck - I wonder if the problem is the lack of a file called x86_64-w64-mingw32-gcc but I cannot figure out where this should come from or be stored.
install.packages("RMySQL", type = "source")
Installing package(s) into ‘C:/Users/lokell/Documents/R/win-library/2.14’
(as ‘lib’ is unspecified)
Warning: dependency ‘DBI’ is not available
trying URL 'http://cran.ma.imperial.ac.uk/src/contrib/RMySQL_0.10.2.tar.gz'
Content type 'application/x-gzip' length 52150 bytes (50 Kb)
opened URL
downloaded 50 Kb
* installing *source* package 'RMySQL' ...
** package 'RMySQL' successfully unpacked and MD5 sums checked
** libs
rm -f RMySQL-init.o connection.o db-apply.o driver.o exception.o fields.o result.o utils.o
"C:/PROGRA~1/R/R-214~1.1/bin/x64/Rscript.exe" "../tools/winlibs.R"
x86_64-w64-mingw32-gcc -I"C:/PROGRA~1/R/R-214~1.1/include" -I../windows/libmariadbclient-2.1.0/include -I"d:/RCompile/CRANpkg/extralibs64/local/include" -O2 -Wall -std=gnu99 -mtune=core2 -c RMySQL-init.c -o RMySQL-init.o
x86_64-w64-mingw32-gcc: not found
make: *** [RMySQL-init.o] Error 127
ERROR: compilation failed for package 'RMySQL'
* removing 'C:/Users/lokell/Documents/R/win-library/2.14/RMySQL'
The downloaded packages are in
‘C:\Users\lokell\AppData\Local\Temp\RtmpkPZRnB\downloaded_packages’
Warning messages:
1: running command 'C:/PROGRA~1/R/R-214~1.1/bin/x64/R CMD INSTALL -l "C:/Users/lokell/Documents/R/win-library/2.14" C:\Users\lokell\AppData\Local\Temp\RtmpkPZRnB/downloaded_packages/RMySQL_0.10.2.tar.gz' had status 1
2: In install.packages("RMySQL", type = "source") :
installation of package ‘RMySQL’ had non-zero exit status