I have a multi-dimensional cube that contains French translations which are working as expected with both languages (English and French). The cube also contains Drillthrough actions which also work as expected with English.
The problem is when the cube is browsed in French, the drillthroughs still return English. When I run Profiler, I see the localization identifier "" properly set to 1036 - French(France) for the MDX Drillthrough command.
What am I doing wrong?
How to correct this?
Thanks in advance for answering my question.
The translations are on the Caption and I was using the member's Name property with a DrillThrough action. To solve the problem, I create a Cube Action with a Rowset action type and used ASSP library function GetCustomDrillthroughMDX. The command similar to below.
ASSP.GetCustomDrillthroughMDX("
caption ([$Interview].[Interview ID])
,caption ([$Interview].[Description])
,caption ([$InterviewDate].[Date])
,caption ([$Category].[Category Level1])
,caption ([$Category].[Category Level2])
,caption ([$Category].[Category Level3])
,caption ([$Category].[Category Level4])
,caption ([$Category].[Question])
,caption ([$Category].[Answer])
")
This allowed me to pull the correct translations.
Related
Within the dimension properties for an attribute within SSAS, there is an option called TokenizationBehavior which is defaulted to TokenizationNone. The alternative is TokenizationText.
I tried it out and it gives an error message as per below. There is little content on the internet about anybody trying this out or what it is actually for. Any ideas? I'm not sure if this Tokenization is for parsing text or a security mechanism? And why it doesn't work or how it's supposed to work in SSAS?
The ddl500:TokenizationBehavior element (namespacehttp://schemas.microsoft.com/analysisservices/2013/engine/500) cannot appear under Envelope/Body/Execute/Command/Batch/Alter/ObjectDefinition/Database/Dimensions/Dimension/Attributes/Attribute
I looked at the XML code which adds the below line if you put TokenizationText in the dimension attribute properties:
<ddl500:TokenizationBehavior valuens="ddl500_500">TokenizationText</ddl500:TokenizationBehavior>
I'm a DNN beginner. I am currently building a module in which I can display statistics. My DotNetNuke Version is 7.0. The statistic is from Chartjs. For this statistic I would like to implement filters. These filters should be datepickers. As UI element I have now included a textbox with TextMode='Date'. But currently I have problems to set the default value of this field. The default value should be 01.01. of the current year.
I have already tried to set the value via C# server side. Unfortunately without success. I also tried to set the value on the client side via JavaScript. Unfortunately also without success.
These are some lines I tried in JavaScript:
document.getElementById(<%= this.DatumVon.AccessKey %>).value = "01.01.2019";
document.getElementById(<%= this.DatumVon.AccessKey %>).innerText = "01.01.2019";
document.getElementById("DatumVon").value = "01.01.2019";
These are some lines I tried in C# in the method "Page_Load" (server side):
this.DatumVon.Text = "01.01.2019";
I expected the value of the TextBox to be 01.01.2019. However, it currently only contains dd.mmm.yyyy. How can I change this?
Thank you.
There is something wrong with your localization. Please refer to the jQuery UI datepicker documentation (the "Localization" section), this should give you the answer.
wow... I solved it. I made it. Sometimes the solution is right in front of you and you don't see it. Michael Tobisch was absolutely right. When setting the value, the format is very important. I have always used the German format. A DNN TextBox with TextMode="Date" can't handle that. DNN converts this TextBox into an HTML input field. But this input field can only be clear with the format "yyyy-mm-dd". Depending on the geographical position of the client (at least that's what I think) the text displayed in the input field will be formatted. But the value of the input field always has the same format ("yyyy-mm-dd"). So very important here: the displayed text and the actual value have different formats.
Many thanks again to Michael Tobisch for the mental inspiration and the patience with me.
What is also important is that the access to the actual ID of a DNN element works as follows: this.Element.ClientID and not as I assumed before this.Element.AccessKey. This was also buggy.
I'm struggling to get all the required (and only the required) information into the documentation of my Enterprise Architect Project. Precisely: we have modelled various requirements and displayed the source "standards" for these requirements in our diagrams by using the "hyperlink"-element out of the common toolbox. (This allows us to capture a title, the website where the documentation is found and a description of this documentation).
Now this element is visible on the diagram, but not in the package-view of our model and it does not get generated in our word (docx) documentation.
I can see that it should be possible to get this in the documentation, because a "Model Report" which basically prints everything does print the hyperlinks. But I can't find what I have to select in my template (in the package-tree view, as a package field, element field or diagram field) in order to get this printed. I can't just use the model report since this basically dumps the whole database in the document and reverse-engineering this model report has proven too difficult for me. Actually I would expect this to be in some kind of documentation for EA, but could not find such a thing with this level of detail... is there, is there a reproducible way of finding such things out in further cases? (btw I'm using EA 11.0)
[sorry there were illustrations here, but I'm not allowed to upload them...]
As Geert has already noted, there is a difference between "proper" elements and diagram-only elements. This is actually reflected in the document template editor, where there is an "Element" section inside the "Diagram" section. This will produce output for all elements in the diagram, whether or not they are also in the project browser.
Here's an example of the information you can pull out of your hyperlinks. Given a diagram with a hyperlink:
... and a template which outputs name, alias and hyperlink for each element in the diagram:
... EA will generate a document will the following contents:
So if you want the hyperlink to result in a hyperlink in the document, use the HyperlinkAlias field.
What might be a bit confusing is the fact that in addition to the Hyperlink element type in the Common diagram toolbox, EA allows you to create hyperlinks in regular elements (in the Element Properties dialog, Related tab: Files, which can be local files or web addresses).
In fact, I would recommend that you use those in your Requirement elements rather than diagram-only Hyperlinks if traceability is a priority in your model. The diagram-only Hyperlinks, on the other hand, give you a clearer visual.
Selecting a subset of the elements in a diagram ("only the required information") is a little more involved and depends on how your model is structured. Template fragments will get the job done, but you might be able to achieve your desired result by just using the filters in the document generation dialog.
The hyperlink is an element that is stored in the same package as the diagram it is used on, it is just not visible in the project browser (similar to a note element).
There's a good chance that it doesn't have a name, so make sure you don't omit nameless elements.
So if you print all the element of the package containing the diagram then you should be able to print the hyperlink as well.
In case that fails you might want to consider creating a template fragment based on an SQL query or a script. Those offer lots of flexibility to print whatever you need, even if it is located in a different package.
[Edited on 04.05.15 to reflect the comment by Uffe and provide a final solution]
Ok, based on Geerts answer, using the following custom query fragment in the diagram section:
select
t_object.ea_guid as CLASSGUID,
t_object.Object_Type as CLASSTYPE,
t_object.Object_Id as OBJECTID,
t_object.name as HL_Name,
t_object.Stereotype as HL_Stereotype,
t_object.object_type as HL_Type,
t_object.Alias as HL_Alias,
Note as Notes
--,t_object.*
from t_object
left join t_diagramobjects on (t_object.Object_ID = t_diagramobjects.Object_ID)
left join t_diagram on (t_diagram.Diagram_ID = t_diagramobjects.Diagram_ID)
where t_diagram.Diagram_ID = '#DIAGRAMID#'
and t_object.Object_Type='Text'
I was able to get a list of the hyperlinks following the diagram, this is the fragment:
custom >
{HL_Alias}: {HL_Name}
{Notes}
< custom
The "Notes" can be printed by getting the attribute directly out of the t_object table. Don't get confused as I was at first: the auto-completion on t_object and the results (t_object.*) DO NOT SHOW a Note-Attribute, but it does exist an when you write it into the query, it gets generated in the document.
Can Yii formatCurrency be used to format a currency value in cGridView with zero decimal places?
My current code is:
Yii::app()->locale->numberFormatter->'.'formatCurrency($data["'.$columnName.'"],Yii::app()->params->currency)
Which results in:
$50,000.00
And I want the result to be:
$50,000
Same problem discussed in Yii forum. Here I added some points. Please check the relevant link.
This is due to your locale currency settings. Go and check your YII framework folder/i18n/data you will fix the problem there... Find your locale and fix it.
In ii18n/Cnumberformatter.php
change line 162
$value=round($value,$format['maxDecimalDigits']);
to
$value=number_format($value,$format['maxDecimalDigits'],'.','');
refer this forum.
http://www.yiiframework.com/forum/index.php/topic/21002-formatcurrency-broken/
I am having an issue with the "Profile Checkboxes" module which stores custom profile fields comma separated.
The issue is if I create a view to filter by a value. The SQL result ends up being something like this:
...AND (profile_values_profile_interests.value in ('Business and Investment'))...
Which will not return any data since the value is stored like this:
"Business and Investment, Case Law, Labor Law, Tax Law"
I just need to adjust the SQL so that it is making sure the field contains the selected value
Is there anything I can do to adjust this?
For a 'quick hack' solution, you could try implementing hook_views_query_alter(&$view, &$query) in a custom module, check $view->name (and eventually also $view->current_display) to ensure you are dealing with the right view/display, and then manipulate $query as needed.
EDIT: Looks like the underlying problem has been addressed by the module maintainer in the meantime - see John's answer ...
I'm the creator and maintainer of Profile Checkboxes and thought you might be interested to know that the new version of the module now stores the values as serialized and includes Views support. The feature is available in the current release version.
Check out the Views modify query module.