It might be the most silly question in planet. how can I merge two cell values vertically in a repeated manner. as like this:
Column A and B has 400+ cells therefore it is impossible to do what I want to achieve manually.
Note: I want to merge B into A.
You can create a simple loop in VBA that runs through each cell in the data range then adds it to the output column
Sub Merge()
Dim data As Range
Dim cell As Range
Dim output As Range
Dim i As Integer
Set data = Range("A2:B4")
Set output = Range("D2")
i = 0
For Each cell In data
output.Offset(i, 0) = cell
i = i + 1
Next
End Sub
You can use the INDEX function to refer to each cell. If data is in A2:B4, this formula works in any column but must start in row 2 and can then be filled down:
=INDEX($A$2:$B$4,ROW()/2,MOD(ROW(),2)+1)
The formula uses the current row as a counter. On every even row it gets a value from the first column of data and on every odd row it gets a value from the second column of data. After every 2 rows it gets values from the next row of data.
Sub CompareValues()
Dim rng As Range
Dim cellA As Object
Dim cellB As Object
Dim count As Integer
Set rng = Selection
For Each cell In rng
'test if value in column A is less than in column B
If cellA.Value < cellB.Value Then
count += 1
End If
Next
End Sub
Basically I have a spreadsheet with 50+ columns that each have 350 rows with mostly numeric values (the values will either be a number or NA if a result wasn't available). I want to be able to generate a count at the bottom of each column that tells me how many of the values in a column are less than the equivalent values in the previous column. So if B3 < A3 the count would go up. But if B3=A3 or B3 > A3 then it wouldn't iterate the count. I know I need to loop through each value and compare it to the value in the same row in the previous column but I'm pretty lost on how to actually do that. Any help would be greatly appreciated.Thanks.
Simple solution just using formulas. At the bottom of each column, for example on B351 you would use the array formula:
=SUM(IF(A1:A350<=B1:B350,1,0))
Note that this is inputted by pressing CTRL + SHIFT + ENTER. Regards,
I have a sheet with just order numbers and another with order numbers and all of the data associated with those order numbers. I want to match the order numbers and transfer all of the available data into the other sheet. I've been trying to use loops and VLOOKUP but I'm having problems (plus I have 116 columns I want to transfer data from so my vlookup expression doesn't look very nice). Any advice would be appreciated!
this is what I have so far and I'm getting an object error.
I don't think it's the right way to go about it in general though.
Dim LookUpRange As Range
Dim row As Range
Set LookUpRange = Worksheets("batches").Range("B4:B1384")
Set row = Worksheets("batches").Range("C:DL")
For Each row In LookUpRange
row.Select
Selection.FormulaArray ="=VLOOKUP(RC[-1],OrderLvl!RC[-1]:R[1380]C[113],{2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100,101,102,103,104,105,106,207,108,109,110,111,112,113,114,115},FALSE)"
Next row
End Sub
Please consider this VBA script to resolve your inquiry:
Sub LookupOuput()
Dim OrderNumberColumn As Range
Set OrderNumberColumn = Worksheets("batches").Range("B2:B1384")
Dim LookUpRange As Range
Set LookUpRange = Worksheets("OrderLvl").Range("C:DL")
Dim cell As Range
Dim FindResult As Range
For Each cell In OrderNumberColumn
If Not cell.Value2 = Empty Then
Set FindResult = LookUpRange.Find(what:=cell.Value2)
If Not FindResult Is Nothing Then
cell.Range("A1:DJ1").Value2 = LookUpRange.Rows(FindResult.row).Value2
End If
End If
Next cell
End Sub
Basically searches for each Order Number in the first sheet on the second sheet. This outputs (if search term exists) the cell that that string is found which we later refer to its row number to output the whole row to the first sheet. Cheers,
A regular VLOOKUP may be able to give you what you need, if you use a small trick...
Insert a row above the data table, and put sequential numbers in
each cell of that row. (ie, A1 = 1, B1 = 2, C1 = 3, etc...)
Do the same thing on your blank table.
Assuming that your first order number is in cell A2, put the following formula into B2: =VLOOKUP($A2,[other sheet name]!$A$1:$DZ$5000,B$1,0)
Drag this formula across all 116 columns, then down all however many rows you've got.
You'll need to adjust the ranges, obviously, but make sure that your lookup array starts in column A. (or alternatively, that your numbers start in the same column as the first column in your array.) Adding the numbers along the top allows you to change what column of the array you're referencing, just by dragging the cell formula.
I have seen some VBA examples on here allowing one to merge set numbers of cells, but none exactly as I need it.
What I would like to do is go down the entire column A:A and merge every four rows, starting with cell A4. I know this involves changing the reference cell but I'm not skilled enough with the language to know how to do this without screwing up the cycle.
Here is an example of the data I would like to format. Thanks in advance for any and all help with this.
Simply set Count to the number of merged cells that you want and run the MergeColA.
Sub MergeColA()
Dim Count As Integer
Count = 10
MergeCells (Count)
End Sub
Sub MergeCells(Count As Integer)
For i = 4 To 4 * count Step (4)
Dim r As Range
Set r = Range("A" & i, "A" & i + 3)
r.Merge
Next i
End Sub
I have an XL file with some data to be manipulated. I think I will need to use a VB script to do this - but perhaps there is a simpler way with a formula. Just the same, could someone point out BOTH ways of achieving the following?
I have a column of numeric values (ID) in Sheet 1.
I want to use each ID as an index to lookup a list in Sheet 2.
Sheet 2 has two columns
First column is the index and Second column is the Text String
e.g.
1 Apple
2 Orange
3 Pear
What I want is to replace the column of IDs in sheet 1 with the looked up text string from Sheet 2!
Thats all...
Please help!
Not a tough situation there. Here are some solutions...
With VBA:
I know you said you're a little new with VB so I tried to explain each line as I went along. Also, the code is free-handed so forgive me if I left an error in there somewhere.
Sub replaceData()
dim i as integer, j as integer 'These are just some variables we'll use later.
dim sheetOne as worksheet, sheetTwo as worksheet, myWb as workbook
dim myData as string, myId as string
set myWB = excel.activeworkbook 'These three lines set your workbook/sheet variables.
set sheetOne = myWB.worksheets("Old Data")
set sheetTwo = myWB.worksheets("New Data")
for i = 1 to sheetTwo.usedrange.rows.count 'This loops through the rows on your second sheet.
myId = sheetTwo.cells(i,1).value 'This assigns the value for your id and the data on your second sheet.
myData = sheetTwo.cells(i,2).value
for j = 1 to sheetOne.usedrange.rows.count 'This loops through the rows on your first sheet.
if sheetOne.cells(j,1).value = myId then 'This checks each row for a matching id value.
sheetOne.cells(j,1).value = myData 'This replaces that id with the data we got from the second sheet.
end if
next j
next i
end sub
With an Excel formula:
Place the following formula in cell C1 of the first worksheet (the
sheet with the IDs you will be replacing). **Note that you will
have to replace the "InsertSheetTwoNameHere" portion with the name
of your second sheet (don't remove those single quotes though). Also
note you will need to replace the "1000" with the number of the last
used row in sheet two.
=vlookup(A1,’InsertSheetTwoNameHere’!$A$1:$B$1000,2,FALSE)
Next simply drag the handle on the cell that makes it copy itself
(whatever the heck it's called) all the way down to the end of your
range.
Next, copy those cells and then paste them over the IDs using the
Values Only setting.
Hope this helps and good luck.