I am using below SQL query to get data by mentioning date range without year.
Select * from table where Left(Convert(Varchar(10),Cast(createddate As Date),101),5) between '11/01' and '12/31'
The above query works say when the user enter the date range as '11/01' to '12/31'. But, when the user enters anything like '11/01' to '01/31' or '05/31' to 02/28' etc, the query is not returning any data.
Is it possible to make it work for above ranges?
I would use the month() function:
Select *
from table
where month(nm_birthdate) in (11, 12);
Your query, however, should work because 101 zero-pads days and months.
If you want to find birthdays between two dates in MM/DD format, you could do:
where (#startmmdd < #endmmdd) and convert(varchar(5), nm_birthdate, 101) between #startmmdd and #endmmdd) or
(#startmmdd > #endmmdd) and convert(varchar(5), nm_birthdate, 101) not between #endmmdd and #startmmdd)
There might be a little adjustment depending on whether or not you want to include the end points.
Notes:
The variables #startmmdd and #endmmdd need to be in MM/DD format. Leading zeros are needed for months and days less than 10.
Convert conveniently uses the length of the data type, so left() is not necessary.
Use DATEPART, something like this:
SELECT * FROM table WHERE datepart(month, birthdate) IN (11, 12)
Of course, you can combine it with:
datepart(day, birthdate)
in order to get more complex condition.
Hope it helps
Related
I have been battling for two days now, please could someone give me a bit of assistance on below. I am trying to select data where a date field/column must equal today's date.
SELECT *
FROM stock
WHERE DATE(PREVSELLPRICE1DATE)=DATE(now());
Please assist if you can, I need to rollout this report.
it is better not to manipulate DATE column using functions like TRUNC to mach the date without hour precision (matching year-month-day), it recommended for performance to use something like:
SELECT *
FROM stock
WHERE PREVSELLPRICE1DATE between trunc(sysdate) and trunc(sysdate+1)
this way you'll compare for the required day only + the TRUNC function will be applied only 2 times instead of on each row.
For sql server below is fine:
SELECT *
FROM stock
WHERE CAST(PREVSELLPRICE1DATE as date) = CAST(GETDATE() as date)
Below script
select cast(getdate() as date)
will give you result:
2017-06-29
I have a date in following format in my DB.
10/16 - mm/yy
I need to convert it to:
October/16
Is this possible?
If it's not possible then please tell me why.
This is not a date, it's missing the day, it's a bad way to store year/month. There should be a 4 digit year to avoid confusion and the year should be listed first to enable correct sorting, e.g. '2016/10' or a numeric value 201610.
You can cast it to a DATE first and then use a FORMAT to disply only month/year:
set dateformat myd;
select format(cast(mystupidcolumn + '/1' as date), 'MMMM/yy')
Or SUBSTR the month part and use a CASE.
try this format,
SELECT DATENAME(month, DATEADD(month, #mydate-1, CAST('2008-01-01' AS datetime)))
You can display date by using this code
select datename(month, YourColumnName) + '/' + right(YEAR(YourColumnName),2)
FROM yourTableName
Simply change yourColumnName with name of your table column and yourTableName with name of table.
Yes you can, and it depend in what database you use to call date functions
If you column Datetime format
SQL server DATENAME(Month, GETDATE())
MySQL database MONTHNAME(now())
otherwise
convert it will in your choice at database or you code logic
split the value and lookup at month enum or fake the date to be accepted and complete date format like 01/10/16
so do something like SELECT DATENAME(Month, datecolumn) + '/' + YEAR (datecolumn)
also you can use instead of Year function DATEPART(yy,datecolumn)
the way you do it with format will look like
CONVERT(VARCHAR(11),GETDATE(),106)
but excepted to get first 3 char of month JUN
I was wondering if there is a way to detect mistyped dates in SQL in a general sense.
For example:
Order1 - 2014
Order2 - 2104
Order3 - 2041
I am guessing a form of case statement using wildcards would do the trick. But I am kind of a beginner in that regard.
EDIT - Sorry, for clarification, my column actually contains YYYY-MM-DD. However, I am only concerned with the year formatting. The datatype is Date for TSQL.
Thank you!
Since your data is already in a date column you don't need to worry about whether the value is a valid date or not.
So basically you are looking - from what I can tell - to see if the date falls in an expected range.
So you might want to do something like
SELECT * FROM MYTABLE WHERE MYDATE NOT BETWEEN '01/01/1900' AND '12/31/2020'
(obviously you can make the range whatever values you want, either static values or values stored in an options table)
You could take this a step further and validate it on a dynamic range, something like this:
SELECT * FROM MYTABLE
WHERE MYDATE NOT BETWEEN DATEADD(YEAR, -5, GETDATE()) AND DATEADD(YEAR, 5, GETDATE())
A further step would be to validate it in a range, based on some other field in the table, such as a created-on date for the record, like this:
SELECT T.* FROM MYTABLE T
WHERE T.MYDATE NOT BETWEEN DATEADD(YEAR, -5, T.CREATEDON) AND DATEADD(YEAR, 5, T.CREATEDON)
This gives you a bit more flexibility, because the "incorrect" dates may actually be valid at another point in time.
This should give you some starting points from which you can flesh out your exact needs.
assuming you are using a varchar field (through the comments) try,
Where your_column not like '200_' or your_column not like '201_'
if you were using a int for year you could use a range
Where your_column not between 2000 and 2014
I'm pretty new to Sybase and am writing a query to return results after a specified date, and also before a specified date. MM/DD/YYYY format
At the moment im doing..
SELECT *
From aTable
WHERE afterDate >= 08/07/2013
AND beforeDate <= 08/08/2013
I'm getting records back, but as I'm a Sybase newbie, I want to be sure Sybase is interpreting these dates correctly..
Their online doc is pretty bad for basic explanations on things like this!
Anyone able to confirm if what I have works, or does it need some formatting round the dates?
You'll need to convert the dates into DATETIME and tell sybase what the format is to be sure.
According to this documentation the code for MM/DD/YYYY is 101, so something like this:
SELECT *
FROM aTable
WHERE afterDate >= CONVERT(DATETIME,'08/07/2013',101)
AND beforeDate <= CONVERT(DATETIME,'08/08/2013',101)
You can see the difference by running the following select statements:
SELECT CONVERT(DATETIME,'08/07/2013',101) --MM/DD/YYYY (2013-08-07 00:00:00.000)
SELECT CONVERT(DATETIME,'08/07/2013',103) --DD/MM/YYYY (2013-07-08 00:00:00.000)
For any date-time field in sybase, instead of going through the convert function, there is a more direct approach.
SELECT *
From aTable
WHERE afterDate >= '2013-08-07'
AND beforeDate <= '2013-08-08'
The date has to be in the form 'YYYY-MM-DD'
If you want to add a time, it can be included along with the date. The date and the time have to be separated by a T.
Any date time field can be directly used using the format 'YYYY-MM-DDTHH:MM:SS'
Using the functions is too lengthy. Noone needs a bazooka to shoot a squirrel! :)
CAST( '2000-10-31' AS DATE )
will convert from text to date format....
I am assuming that your two fields (afterDate and beforeDate) are in Date format.
Your example would be:
SELECT *
From aTable
WHERE afterDate >= CAST( '08/07/2013' AS DATE )
AND beforeDate <= CAST( '08/08/2013' AS DATE )
Also, usually (but not always) a date range is on the SAME field. As I said, that is not true all the time and you may have a good reason for that.
The best approach is to use the ANSI standard which does not require any conversion: yyyymmdd (you can also include hh:mm:ss) for instance:
DateField1 >= "20150101" and DateFile1 <= "20150102"
You should decide which Input-Strings the user is going to use as parameter and then convert them and concatenate them like you want, unless it is Datetime it is not important which initial format it had, you can use it in a between-condition.
E. g. the user is from Europe and uses "DD.MM.YY" and "hh:mm" as an input parameter, I would convert and concatenate like this:
WHERE dateCol between convert(DATETIME,
convert(char(11),
convert(DATETIME, '01.06.14', 4), 16) || ' ' || '00:00', 8)
AND convert(DATETIME,
convert(char(11),
convert(DATETIME, '01.07.14', 4), 16) || ' ' || '16:00', 8)
The field DATE in the database has the following format:
2012-11-12 00:00:00
I would like to remove the time from the date and return the date like this:
11/12/2012
First thing's first, if your dates are in varchar format change that, store dates as dates it will save you a lot of headaches and it is something that is best done sooner rather than later. The problem will only get worse.
Secondly, once you have a date DO NOT convert the date to a varchar! Keep it in date format and use formatting on the application side to get the required date format.
There are various methods to do this depending on your DBMS:
SQL-Server 2008 and later:
SELECT CAST(CURRENT_TIMESTAMP AS DATE)
SQL-Server 2005 and Earlier
SELECT DATEADD(DAY, DATEDIFF(DAY, 0, CURRENT_TIMESTAMP), 0)
SQLite
SELECT DATE(NOW())
Oracle
SELECT TRUNC(CURRENT_TIMESTAMP)
Postgresql
SELECT CURRENT_TIMESTAMP::DATE
If you need to use culture specific formatting in your report you can either explicitly state the format of the receiving text box (e.g. dd/MM/yyyy), or you can set the language so that it shows the relevant date format for that language.
Either way this is much better handled outside of SQL as converting to varchar within SQL will impact any sorting you may do in your report.
If you cannot/will not change the datatype to DATETIME, then still convert it to a date within SQL (e.g. CONVERT(DATETIME, yourField)) before sending to report services and handle it as described above.
just use, (in TSQL)
SELECT convert(varchar, columnName, 101)
in MySQL
SELECT DATE_FORMAT(columnName, '%m/%d/%Y')
I found this method to be quite useful. However it will convert your date/time format to just date but never the less it does the job for what I need it for. (I just needed to display the date on a report, the time was irrelevant).
CAST(start_date AS DATE)
UPDATE
(Bear in mind I'm a trainee ;))
I figured an easier way to do this IF YOU'RE USING SSRS.
It's easier to actually change the textbox properties where the field is located in the report. Right click field>Number>Date and select the appropriate format!
SELECT DATE('2012-11-12 00:00:00');
returns
2012-11-12
Personally, I'd return the full, native datetime value and format this in the client code.
That way, you can use the user's locale setting to give the correct meaning to that user.
"11/12" is ambiguous. Is it:
12th November
11th December
For more info refer this: SQL Server Date Formats
[MM/DD/YYYY]
SELECT CONVERT(VARCHAR(10), cast(dt_col as date), 101) from tbl
[DD/MM/YYYY]
SELECT CONVERT(VARCHAR(10), cast(dt_col as date), 103) from tbl
Live Demo
TSQL
SELECT CONVERT(DATE, GETDATE()) // 2019-09-19
SELECT CAST(GETDATE() AS DATE) // 2019-09-19
SELECT CONVERT(VARCHAR, GETDATE(), 23) // 2019-09-19
In mysql at least, you can use DATE(theDate).
You may try the following:
SELECT CONVERT(VARCHAR(10),yourdate,101);
or this:
select cast(floor(cast(urdate as float)) as datetime);
Use this SQL:
SELECT DATE_FORMAT(date_column_here,'%d/%m/%Y') FROM table_name;